Piston compressor

BOGE SB m770-25

Condition: used, grinding length 1000 mm grinding width 300 mm workpiece height 230 mm table surface area 1000 x 240 mm x-travel 1000 mm y-travel 270 mm Ncsdpou Dn Txsfx Ab Tsn z-travel 350 mm grinding wheel diameter 240 mm grinding spindle speed 2180 U/min table speed -stepless- 3 - 30 m/min total power requirement 4,5 kW weight of the machine ca. 2,8 t dimensions of machine L x W x H 2,36 x 1,37 x 2,0 m Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachment

Condition: used, Year of construction: 1989, Used, well-maintained GEIBEL+HOTZ surface grinding machine Model FS 50 SA Grinding area 500x250x375mm, Vertical automatic with fine-pole electro-magnetic chuck, Grinding wheel diameter 300x50x76.2mm, with paper band filter system, with manual dresser on top. various wheels and flanges Weight: approx. 2400 kg Space requirement approx. 2500x1800xHeight 2500mm Ncsdpfx Abjwq Nc Ns Tsn Machine is located with us in 71334 Waiblingen-Beinstein and can of course also be inspected. Please contact us.

Year of construction: 1984, condition: used, machine/vehicle number: 57051/4, Manufacturer: Rhode & Doerren mountain (May) Nsdpec Nv S Aefx Ab Tecn Model: SS 40 U M. Nr: 57051/4 Year of construction: 1984 Weight: 950 KG General information / technical data: used drill grinder from German production for 2, 3 and 4-bladed tools in good condition. Diameter range: from 5mm to 40mm Wekzeuglaenge: 500mm Point angle: from 80° to 160 ° Clearance angle: of 1 ° 30 ' up to 10 ° Wheel: 210 x 127 x 50mm (disc) Tool body: 2, 3 and 4 edged drill and countersink Tools grinding direction: cutting left & right Dimensions machine: (l x w x h) 1350mm x 1100mm x 1400mm Power supply / control voltage: 380Volt 50 HZ / 220V motor power / total power: 2,2 KW / 2.55 KW Optional accessories: • 2 wheel shots with grinding wheel • 8 piece collet chucks for drill bit recording make Forkardt • 6 piece MK recording & drill extensions • Coolant system • Documentation of the machine & electric schematic Comments: The machine is with us in the camp under power and is ready for a demonstration by arrangement.

Condition: used, Year of construction: 1987, Technical details: grinding length: 600 mm grinding width: 350 mm workpiece height: 600 mm feed: 1 - 30 m/min magnetic plate size: 610 x 255 mm distance table - spindle center: min./max. 150 / 420 mm grinding spindle speed: 3000 U/min stroke of the table: min./max.: 200 / 650 mm total power requirement: ca. 4,0 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,5 x 1,9 x 2,0 m dimension coolant device LxWxH: 0,63 x 0,40 x 0,65 m Headstock: -vertical travel Y = 0.002 - 0.06 mm -adjustment = 0,001 - 2mm Cross slide: -transverse travel Z = 360mm -feed adjustment = 1 - 60mm/stroke -rapid traverse = 1.2 m/min. Dressing manual Cooling water unit with capacity 140Liter Equipment: -3x support feet -machine lighting Nsdpsu Ngicjfx Ab Tscn accessories: -alignment device for grinding wheel holder *

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 Nodpfx Aedkx Aneb Tjcn - right - left rotation - Drilling spindle stroke 150 mm - drilling spindle speed infinitely variable 80 - 1170 rpm - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm - Height adjustable via toothed rack with hand crank - Drive 400 V / 0,9 / 1,3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - coolant device - quick-action drill chuck 1-13 - illumination

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm Nodpfx Asu Ngybsb Tecn table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. *

Condition: ready for operation (used), A surface grinding machine ELB-Schliff with position display is available. Magnetic chuck dimensions X/Y: 900mm/450mm, grinding length: 900mm, grinding width: 450mm. Documentation available. An on-site inspection is possible. Nedpfxjya Hw Io Ab Tjcn

Condition: used, Year of construction: 2015, operating hours: 2,766 h, power: 16 kW (21.75 HP), Ride-on Lawn Mower KUBOTA G23-2 HD with High Dump 16.1 kW / 22 HP Includes mid-mount mower deck RCK 48 with 1.22 m cutting width, 640-liter grass collection box with hydraulic high dump ---- * Engine: 898 cm³ 3-cylinder KUBOTA diesel engine, emission stage V, engine output (SAE J1995) 16.1 kW (21.9 HP) * Transmission: HST transmission, load-sensing control, max. speed 19 km/h * Mechanical differential lock * Cruise control * Single pedal operation * PTO shaft drive * Oil-cooled disc brakes * Turf tires front 16 x 7.5-8, rear 24 x 12.00-12 Comfort features: * Fully hydraulic power steering, tilt-adjustable steering wheel * Coolant temperature gauge * Hour meter * Tachometer * Easy Checker * Safety system for mower and drive operation * "Kross-Control" single-lever hydraulic control system for all hydraulic functions * Integrated front tie-down points Ncodpfxswcagcs Ab Ten Mid-mount mower deck: * Rotary mower with 2 blades, shaft drive, electrically actuated magnetic clutch, blade drive via spur gear, hydraulic mower lift, central cutting height adjustment 25-102 mm (13-position rotary knob), blade length 673 mm (1.22 m), ground clearance 150 mm Grass collection box: * Hydraulic emptying, discharge height (HD) 1.97 m, integrated fill level warning indicator, includes front weight bracket and additional front weights * Working width: 1.22 m ----Well-maintained used machine from first owner, good condition - ready for immediate use! Errors and changes excepted!

Condition: good (used), Year of construction: 1980, A well-preserved surface grinding machine by BLOHM, model HANSEAT 75, machine no.: 11985, year of manufacture: 1980, with coolant tank. Magnetic chuck: 800x500 mm. Nsdpfx Absw Am Akj Tecn

Condition: new, Hand planer Virutex CE 20 J Universal machine for left and right operation. 750W 13000 rpm. With quick depth adjustment. Nedjum Smyspfx Ab Tscn In original packaging. 1 piece