Closed expansion tank

Bosch FT 10

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, pressure: 1 bar, 1 used low-pressure steam boiler ----- Manufacturer: VIESSMANN Model: Vitoplex 100-LS Output: 580 kW Steam output approx.: 800 kg/h Water content approx.: 1,316 l Permissible operating overpressure: 1 bar Year of manufacture: 2001 Hedpow I T E Isfx Ag Iei CE marking: 0035 Equipped with Weishaupt gas burner, separate control cabinet, feed water pump, and the existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. Hodpfx Agovgrh Us Iji We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Year of construction: 2004, condition: excellent (used), 1 used low pressure steam boiler ----- Hjdpfx Ajnp Hwkog Iji manufacturer : LOOS, Gunzenhausen type : U-ND capacity : 800 kg/h working pressure : 1 bar test pressure : 2 bar water contents full : 1.108 l year of construction : 2004 CE mark : 0036 equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, fittings for gas supply, switch cabinet with touch panel, and the existing small and large-scale fittings. Dimensions of boiler body (approx.): diameter incl. insulation : 1.230 mm width : 1.450 mm transport height : 2.200 mm length : 1.950mm length including burner : 2.700 mm 1 used feedwater module ----- manufacturer : LOOS, Gunzenhausen type : WSM content approx. : 800 l with switch cabinet, sampling water cooler, 2 dosing vessels

Condition: used, A fully assembled and working pellet production line with a capacity of up to 3 tons per hour is for sale. The factory is little used – only 16,000 tons were produced, it is in very good technical and visual condition. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. No additional premises are required for the installation of the plant, the pellet press is already built into the container. The line includes: Press and mill: Salmatec Maxima 700 – reliable German quality with high efficiency and long-term stability. Transport and dosing equipment: Rematec – robust and accurate material supply at all stages. Hodox S Egmopfx Ag Iei Tent shelter. Additional equipment: cyclones, sieves, cooler, control panel, etc. All DWG files, drawings for the foundations of the equipment are available. Main advantages: Large production capacity – up to 3 t/h. High quality components from European manufacturers. Ability to adapt to usage of different raw materials. Line in working order – can be demonstrated in operation. Available immediately.

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Hsdpfxjic Rl Do Ag Iei Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.

Condition: used, For sale: Salmatec Maxima 700 pellet press in full working condition, installed in a Rematec container with electrical cabinet and a tent shelter. Capacity – up to 3 t/h. The line includes: - Press and hammer mill: Salmatec – reliable German quality with high efficiency and durability. - Conveying and dosing equipment: Rematec – robust and precise material handling at every stage. - Additional equipment: cyclones, sieves, cooler, control cabinet, etc. - Tent shelter. Hodpfeit I Rtex Ag Iji Key advantages: - High production capacity – up to 3 t/h. - High-quality European manufacturer components. - Suitable for professional pellet production from wood biomass, agro-biomass or other raw materials. - Fully operational line – demonstration possible. - Available immediately. Dismantling and transport are to be arranged by the buyer. We can recommend a company to assist with this process. The equipment can be inspected in full working order in Sweden. All foundation drawings and DWG files are available. Price: EUR 650,000

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total height: 2,070 mm, total length: 2,000 mm, total width: 1,200 mm, overall weight: 600 kg, Comafer K100, output 100 kg/h. 6mm pellets, chips with 8-12% moisture content. Material is ground by a mill to the appropriate fraction (5.5 kW), then fed by a screw conveyor into a ring die pellet mill (7.5 kW) where it is compacted. The process is fully automatic, controlled from an electrical control cabinet. Very high pellet quality. Hjdpfew Hngljx Ag Iei

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Hodpfx Aswz Ev Teg Isi Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Condition: excellent (used), Year of construction: 2001, pressure: 13 bar, 1 used steam boiler ----- Manufacturer: LOOS, Gunzenhausen Hodpfxowub Hbo Ag Iei Type: U-HD Heating surface approx.: 31 m² Maximum output: 2,000 kg/h Maximum permissible operating pressure: 13.0 bar Increased test pressure: 23.4 bar Water content at NW approx.: 1,740 l Total water content approx.: 2,480 l Year of manufacture: 2001 Equipped with Weishaupt gas burner, gas control line, control cabinet, feed water pump, water level sight glass, steam and safety valve, and the existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, 2 used steam boilers ----- Manufacturer: LOOS International Type: U-HD 500 Heating surface approx.: 9 m² Max. output: 500 kg/h Max. permissible operating pressure: 13.00 bar Increased test pressure: 24.05 bar Full water capacity approx.: 770 l Year of manufacture: 2007 CE mark: 0036 Hodpjv I Rigofx Ag Isi Equipped with Weishaupt gas burner WG40N/1-A, ZM-LN, 55-550 kW, gas control system, Eco control cabinet with touch panel, feedwater pump and the existing coarse and fine valves