Bosch Aventics R412 000 393 Rotary Module Series RCM-SH

Bosch

Condition: used, Bosch Rexroth 5.5 kW hydraulic power unit with HYDAC cooler and pump, Used Machine POWER UNIT / HYDRAULIC TANK (BOSCH REXROTH): Manufacturer / Brand: Bosch Rexroth Kft. Manufacturing No.: 974/2003/33 Confirmation No.: 02/25011666 Drawing No.: ABHAG-0100S41-1483-B Hydraulic Diagram: HS51-E3078-C Tank Capacity: 100 litres (dm³) Recommended Oil Grade: HVU-46 Design: Robust blue-painted steel hydraulic tank with inspection/cleaning opening and oil level indicator DRIVE MOTOR: Manufacturer / Brand: A.O. SMITH Type: 3VZPP 132S 4 (3-phase motor, IEC 34-1) Serial No.: No. 276441 P002 Power: 5.5 kW (50 Hz) Speed: 1450 rpm Voltage / Current: 400 V Δ / 11.3 A Protection Rating / Weight: IP55 (S1 continuous operation, Class F insulation) / 41 kg Codpfj Ahgcpsx Aktori HYDRAULIC PUMP: Manufacturer / Brand: Bosch Rexroth (Made in Germany) Type / Material No.: MNR: 0510 625 022 COOLING UNIT (HYDAC SYSTEM): Manufacturer / Brand: HYDAC Cooling Systems Type: PTK-300/2.0/M/FL007-E Material No. (Mat.-Nr.): 953750 Manufacturing No. (Fert.-Nr.): 10869823 / 002 Year of Manufacture: 2003 / 07 OVERALL DIMENSIONS: Width: 835 mm Depth: 645 mm Height: 1270 mm

Year of construction: 1990, condition: used, pressure 80 t Crjdpfx Ajfn Aqnektsi throat 250 mm stroke 5/95 mm table surface area 805 x 510 mm distance table/ram Hub unten - 400 mm tool hole in ram 45 mm ram adjustment 100 mm ram surface 360 x 300 mm no. of strokes 55 Hub/min total power requirement 5,5 kW weight of the machine ca. 4 t dimensions of the machine ca. 0,83 x 1,7 x 2,6 m

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, A good used Bosch Vertical Form Fill Seal Machine - a real workhorse of a machine with solid construction - suitable for heat seal laminates and fitted with a 250mm flat pack forming set for pillow packs Ready to Ship Worldwide Please contact us for videos and pictures via Whats App Cedpfxj Ah R Tqo Aktsri

Condition: used, functionality: fully functional, For sale: a brushless servomotor BOSCH SE-LB3.075.060-04.000 with permanent magnets and a 24 V holding brake. Data from the nameplate: Codpfx Ao Adudmektjri - Manufacturer: BOSCH - Model: SE-LB3.075.060-04.000 - Part number: Starting torque M₀: 8.2 Nm - Current I₀: 14.0 A - Rated speed: 6000 rpm - Rotor moment of inertia: 17.9 kg·cm² - Protection rating according to the nameplate: IP65 - Insulation class: F - Brake: 24 V, 8 Nm, 0.6 A - Country of manufacture: Germany Condition: used, tested, motor is fully functional. Visible signs of use and a damaged connector – the connector cover is broken and the connector housing has cracks, as shown in the pictures. The connector requires repair or replacement before installation.

Year of construction: 1980, condition: good (used), strip width: 1.650/1.750 mm Credpfx Aodn I Hrektsi strip thickness: 0,4 - 3 mm coil weight: 10 t interchangeable mandrels, Ø: 304/406/610 mm

Condition: used, functionality: fully functional, For sale: a brushless servomotor, BOSCH SE-LB3.075.030-04.000, with permanent magnets and a 24 V holding brake. Technical specifications according to the nameplate: Crodpfs Adt Nhjx Aktsi Manufacturer: BOSCH Type: SE-LB3.075.030-04.000 Number: Stock number: 104-915 093 Starting torque (M₀): 8.7 Nm Starting current (I₀): 8.0 A Rated speed: 3000 rpm Rotor moment of inertia: 17.9 kg·cm² Ingress protection rating according to the nameplate: IP65 Insulation class: F Holding brake: 24 V, 8 Nm, 0.8 A Country of manufacture: Germany — Made in Germany Condition: Used, functional motor. Damaged plastic housing of one of the electrical connectors — a fragment broken off around the pins, as shown in the pictures. The connector requires repair or replacement before use.

Condition: used, Bosch Rexroth Linear Cylinder Machine This machine is a custom-made unit for Bosch, intended for internal use in its production process. The machine includes: Rexroth MSK050C-0600-NN-M1-UG1-NNNN 3-phase synchronous PM motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - Voltage 380-480, 6 bar, 1300 kg, year of manufacture 2016 Condition: used Complete factory closure, Cedpfxjhufclj Aktjri large selection of storage platforms, pallet racking, shelving units, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and hand tools. More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: excellent (used), pressure 50 t Codpfotrhf Aex Akteri throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm hole in the table 240 x 140 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Condition: ready for operation (used), Bosch SPM 50 spindle module SN:372860, used, normal signs of wear, 100% functional, delivery as shown in the photos. Codpfxex Eqzce Aktjri

Condition: like new (used), Year of construction: 2015, functionality: fully functional, pressure: 0.5 bar, temperature: 110 °C, For sale is a steam boiler manufactured by BOSCH - LOOS, model U-ND 2000. Year of manufacture: 09/2015 Capacity: 750 - 1,500 kg/h. Working pressure: 0.5 bar. Crjdpfx Ao Afpfnjktsi Steam temperature: 110°C. Riello gas burner. Complete service documentation. Condition: IDEAL, like NEW. Complete documentation for registration with the UDT (Office of Technical Inspection). Start-up guarantee.

Condition: used, material width 250 mm material thickness 2 - 4 mm no. of straightening rolls 7 Cedpfx Asgbl Aaektori run-in height 1250 mm mm strip intake tiltable, positiv 25 ° strip intake tiltable, negativ 30 ° total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. m Leveler was dismantled, checked and then repainted

Condition: ready for operation (used), Bosch MP 30 control panel, used, with normal signs of wear, 100% functional. Credpfxsi D Uage Aktsi

Condition: excellent (used), Year of construction: 2008, BÖSCH/HEWEMA universal miter fence A97 for panel saws When in the closed position, 90° angle cuts are performed. When adjusting the cutting angle, the two fence profiles are moved synchronously. Cuts can be made on both the front and rear supports. Crjdpjzbytlefx Aktsi The saw angle is read on the scale disc.

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Clamping force 40 kN Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Credpfx Aksdzp T Njtji Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame in relation to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with lead screw, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time continuously programmable - Riveting pressure adjustment continuously adjustable via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units, 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed on the support disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for the construction of a special machine. The riveting unit can also be easily removed and used as a conventional riveting machine by creating a suitable counter-tool.

Condition: excellent (used), For sale: a functional Rexroth hydraulic pump with a mounted Rexroth control valve. The condition of the housing, shaft, connections, and other components is shown in the photos. The following markings were read from the nameplates: Component Designation / Number Pump Type SY2DFEE-20/100-100 Pump Material Number (MNR) R901073415 Pump Serial Number 31132779 Additional Number on the Pump Nameplate Pump Designation FD 07W02, SN 000001 Valve Type VT-DFPE-A-22/G24K0/2D0V/V-019 Valve Material Number (MNR) R901031176 Additional Number on the Valve Nameplate Credpfx Aksz Spfrstei Valve Designation SN 000002 The pump is used and shows signs of wear, as visible in the photos. Before purchasing, it is recommended to compare the complete markings on the nameplates, as well as the shaft and connections, with the requirements of your machine.