Wood chipper

Boxer WCL8

Condition: new, Year of construction: 2025, functionality: fully functional, power: 55.4 kW (75.32 HP), overall weight: 2,050 kg, fuel type: diesel, color: original, axle configuration: 1 axle, operation weight: 2,050 kg, empty load weight: 2,050 kg, fuel: diesel, Technical data: Logs up to 24 cm Infeed width 300 mm Basic weight approx. 2050 kg Year of construction: 2022 4 cylinder Hatz turbo diesel engine With common rail technology and diesel particulate filter Meets the EURO 5 emissions standard. On single-axle chassis for 80 km/h, Power Control System Water-cooled 4-cylinder Hatz turbo diesel engine 55 kW (74.8 hp) with common rail technology and DPF Hodpfx Agov Evx Us Iji Fully galvanized single-axle chassis (80 km/h) Towing device with overrun brake Front support wheel Rear parking support Lighting in accordance with StVZO (impact-protected) Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of the feed speed and thus the chip size Chipper knives can be resharpened several times for a long service life (approx. 10x) PowerGrip feed roller, 300 mm wide, with hydraulic feed Particularly grippy, aggressive and even feed, due to which there is one oil motor per roller Outlet pipe with adjustable spreading flap, pivoting Discharge pipe on ball bearing slewing ring Relevant machine parts with noise insulation Features: Engine and chassis: Water-cooled, Stage V 4-cylinder Hatz common-rail turbo diesel engine with DPF, delivers 55.4 kW (75.3 hp). Automatically acting industrial overrunning clutch between engine and chipper disk to protect engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds of up to 80 km/h with TÜV approval. Robust, fixed sheet steel mudguards. Device for support wheel at the front and parking support at the rear. Height-adjustable towing device with overrun brake and soft-dock ball coupling or DIN towing eye. Lighting in accordance with StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU homologation. Housing/hopper/blow-off pipe: Rotatable chipper housing with adjustable input angle of 270°. Folding feed hopper with a minimum feed depth of 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (inside): Width = 1,160 mm, height = 1,040 mm. Pivoting discharge pipe with adjustable spreading flap. Discharge pipe on ball bearing slewing ring for flexible alignment. Noise insulation on relevant machine parts such as the chipper hood and discharge pipe. Emergency stop button on top of the hopper and on the side of the hopper flap. Chipping unit: Safety circuit in accordance with EN 13525. Chopping disk with a diameter of Ø 800 mm and a thickness of 40 mm. Closed blade system for quick and safe blade changes. Infinitely adjustable chipper knives, resharpenable several times for a long service life. Horizontal counter blade 4-fold and vertical counter blade 2-fold usable for long service life. Winding protection on the main bearing of the chipper disk. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for non-slip and even material transport. Parallel guidance of the top roller for even feeding without tilting. Hydraulically adjustable feed speed to control the size of the wood chips. Fill level indicator for the hydraulic oil tank.

Condition: used, machine/vehicle number: 4131, Comm. no. Lg 34422 High performance automatic punching machine BRUDERER BSTA 60 H from current production. Stroke adjustment has to be repaired. Hjdpfxoinzdls Ag Isi Without soundproof cabin and without conveyor system. Feed BBV 202/120

Condition: used, • Speed (rpm): 2500/4500/6000 Hodjfndivepfx Ag Isi

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Hedpfx Asvuhumog Iei Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: excellent (used), Workbench Brand Garant Kombi, lockable Width 1500 mm Depth 700 mm Height 850 mm Hjdewc Nvtepfx Ag Isi Height with pegboard 1330 mm Total width with vise 940 mm Vice Leinen junior 125 Base cabinet with 5 drawers 1 x 50 mm high 1 x 90 mm high 1 x 125 mm high 1 x 165 mm high 1 x 225 mm high

Condition: new, Year of construction: 2024, ✅ New & in stock ✅ Up to 100mm branch thickness ✅ Shipping possible SCHORR WOOD CHIPPER 100MM BRANCH THICKNESS RR100THX Powerful wood chipper for branches up to 10cm in diameter. Extremely robust and compact. -- 196cc petrol engine with 5.6 HP -- Self-feeding no additional pressure necessary -- 360° ejection -- Compact size -- High user-friendliness -- Extremely robust and reliable EQUIPMENT / FEATURES POWERFUL LIGHTWEIGHT The SCHORR RR100THX wood chipper impresses with its practical size, which maximizes flexibility when used in different locations. Thanks to its width of just 600 mm, the shredder fits easily through any standard door and can therefore also be used in places that are difficult to access (e.g. gardens). With an operating weight of 93 kg in combination with the two tubeless wheels, the shredder is easy to store and transport, even in confined spaces. RELIABLE IN EVERY RESPECT The high-quality cutting unit of the shredder has 2 blades and 1 counter blade made of high-strength steel. The material of the blades is designed for the special requirements of the shredder, it is extremely resistant and at the same time not brittle. The low feed height of 910 mm makes it easier to feed in the wood and thanks to the large feed hopper, you save time by processing large quantities quickly. HIGH LEVEL OF SAFETY AND EASE OF USE Important safety features such as an emergency stop bar on the handle or the central emergency stop button maximize work safety. The integrated catch guard in the feed hopper prevents small pieces of wood from flying out of the hopper. The motor is also equipped with a low oil sensor. This prevents the engine from starting if the oil level is too low to avoid serious engine damage. The ergonomic design of the controls and easy access to maintenance areas complete the practicality of the wood chipper. LOW FUEL CONSUMPTION A major advantage of the efficient engine is the low fuel consumption and the associated reduction in environmental impact. The 196 cc engine also produces less noise than larger machines, making this shredder ideal for residential areas. Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR100THX Drive type: V-belt 13x860Li Max. Branch thickness: 100mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter blade Own weight: 93kg Basic dimensions Total length: 1450mm Overall width: 600mm Total height: 1080mm Discharge angle: 360º Engine capacity Displacement: 196ccm Power max: 4,1kW / 5,6PS Hodpfjt Ivaasx Ag Iji Starter: Reversing starter Our expert team will be happy to answer any questions you may have about the SCHORR HOLZHÄCKSLER 100MM ASTSTÄRKE RR100THX. We look forward to hearing from you and assisting you with advice. Are the purchase costs for a wood chipper too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, which you can take advantage of, please contact us.

Condition: new, Year of construction: 2024, ✅ New & in stock ✅ Up to 150mm branch thickness ✅ Shipping possible SCHORR WOOD CHIPPER 150MM BRANCH THICKNESS RR150THX Powerful wood chipper for branches up to 15cm in diameter. Extremely robust and compact. -- 420 cc petrol engine with 12.4 HP -- Self-feeding no additional pressure necessary -- 360° ejection -- With drawbar -- High user-friendliness -- Extremely robust and reliable EQUIPMENT / FEATURES POWERFUL MOTOR Equipped with a 420 cubic meter petrol engine, the RR150THX wood chipper offers outstanding performance that effortlessly handles even the most demanding tasks. The engine is started conveniently via the electric starter or the cable pull. The power of the engine is transmitted to the centrifugal clutch via the V-belts, ensuring a consistently high power output. The engine also has a low oil sensor, which switches the engine off if the oil level is too low to prevent serious consequential damage. HIGH PROCESSING CAPACITY With the ability to shred branches up to 15 cm in diameter, our shredder enables efficient and versatile processing of suitable wood stocks. Thanks to the large opening of the feed hopper, optimum and convenient feeding of the material is guaranteed. The high-quality workmanship and the use of hard-wearing materials ensure a long service life for the shredder, even with intensive use. EFFICIENT CUTTING SYSTEM The blades rotate at a speed of up to 2000 revolutions per minute, which ensures fast and efficient shredding of the material and reduces working time. The blades are made of high-strength steel and are specially designed for the shredder's demanding tasks. EASY MAINTENANCE Hedpfst Ivl Aox Ag Iji Access to key components is designed to be particularly user-friendly so that maintenance work can be carried out quickly and easily, minimizing both operating costs and downtime. HIGH MOBILITY Thanks to the integrated drawbar and wheels, the chipper can be moved and positioned effortlessly around your site, making handling, transportation and storage much easier. Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR150THX Drive type: V-belt 17x1255La Max. Branch thickness: 150mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter blade Own weight: 255kg Basic dimensions Total length: 2700mm Total width: 1218mm Total height: 1424mm Ejection angle: 360º Engine capacity Displacement: 420ccm Power max: 9,1kW / 12,4PS Starter: Reversing starter Our expert team will be happy to answer any questions you may have about the SCHORR HOLZHÄCKSLER 150MM ASTSTÄRKE RR100THX. We look forward to hearing from you and assisting you with advice. Are the purchase costs for a wood chipper too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, which you can take advantage of, please contact us.

Condition: new, Wood chipper BX 62 R Hodpsx S Uh Hsfx Ag Ioi Condition: New

Year of construction: 1981, condition: reconditioned (used), Erjo 165 SN Chipper totally renovated and as good as new Hodpfei E Tk Nsx Ag Ioi

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 170 h, functionality: fully functional, machine/vehicle number: MKS20728, power: 36.8 kW (50.03 HP), overall weight: 560 kg, color: yellow, Technical data: TYPE Schliesing 175MX LOGS: Up to Ø 16 cm FEEDING WIDTH 24 cm DRIVE POWER 18–36.8 kW / 25–50 HP WEIGHT approx. 560 kg 3-point rear attachment (540 rpm) Operating hours: approx. 170 Logs up to 16 cm Feeding width 240 mm Basic weight approx. 550 kg Recommended drive power: 18–36.8 kW (25–50 HP) Cardan shaft with freewheel. Properties: Drive and attachment: Wood chipper with PTO drive. 3-point rear attachment with an operating speed of 540 rpm. Recommended drive power from 18 to 36.8 kW (25 to 50 HP). PTO shaft with freewheel for safe operation. Fully galvanized, light and solid base frame for stability and durability. Housing/hopper/blow-out pipe: Foldable intake hopper with a minimum input depth of 1,500 mm. Hopper dimensions (inside): width = 890 mm, height = 720 mm. Fully galvanized, light and stable base frame for optimal support. Pivoting blow-out pipe with adjustable spreading flap for precise blowing. Noise insulation on relevant machine parts such as the chipper hood and the blow-out pipe. Two control units (right and left) and three emergency stop buttons for increased safety. Chipping mechanism: Safety circuit in accordance with EN 13525. Hjdpfx Aovmz Rxog Iei Chipping disc with a diameter of Ø 655 mm and a thickness of 30 mm. Closed blade system for quick, safe and precise blade changes. 2-blade chipping disc with continuously adjustable blades. Chipping knives can be resharpened multiple times for a long service life. Horizontal counter knife and vertical counter blade can each be used twice for a long service life. Winding protection on the main bearing of the chipping disc. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (240 mm wide) with hydraulic feed for easy and even material transport. Parallel guidance of the top roller for even feed without jamming. Hydraulic adjustable feed speed to control the wood chip size.