Vacuum pump

Busch RA0255

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW Chedpeg Ey Ufefx Aknec heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), Year of construction: 2013, overall weight: 755 kg, volume flow: 316.2 m³/h, PROD. KAESER TYPE - ASD47 SFC S/N - 3068 YEAR - 2013 POWER (kW) - 25 Cedpfx Aera Akzjknehc OUTPUT. (m3/min) - 1.07-5.27 CIS (bar) 8.5 WAVE - yes BUILT. DRYER - no EXCHANGER - yes

Condition: new, Year of construction: 2025, The DURMA AD-S 611600 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1600 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: - Model: DURMA AD-S 611600 - Pressing force: 1600 tons Chjdpevy Sraefx Aknec - Working length: 6 meters - Condition: As good as new, available immediately Features and advantages: - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the backgauge control - Support for heavy and large sheets thanks to the integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,915 h, pressing force: 255 t, total height: 3,000 mm, overall weight: 15,000 kg, travel distance X-axis: 600 mm, travel distance Z-axis: 1,900 mm, product length (max.): 4,100 mm, number of axes: 5, This 5-axis Bystronic Xpert 250/3100 press brake was manufactured in 2014. It features a press force of 2500 kN, bending length of 3100 mm, and a throat depth of 400 mm. The machine includes a robust 22 kW main motor and operates with high precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 250/3100 machine we have for sale. Contact us for more information about this machine. • Units available: 2x similar units • Standard stroke [S]: 265 mm • Open height [D]: 550 mm • Distance between side frames: 2750 mm • Throat depth [T]: 400 mm • Table width: 60 mm • Max. backgauge range in X (2/4/5 axes): 1050 mm • X-axis speed (2/4/5 axes): 650 mm/s • X-axis accuracy (2/4/5 axes): +/- 0.04 mm • R-axis travel (2/4/5 axes): 250 mm • R-axis speed (2/4/5 axes): 200 mm/s • R-axis accuracy (2/4/5 axes): +/- 0.1 mm • Z-axis speed (4/5 axes): 1500 mm/s • Z-axis speed (6 axes): 1200 mm/s Chedpfxex D Dw Sj Aknec • Z-axis accuracy (4/5 axes): +/- 0.1 mm • Approx. max. Y-rapid traverse: 200 mm/s • Approx. max. Y-rapid traverse in High Speed*: 220 mm/s • Max. Y-working speed: 10 mm/s • Approx. max. Y-working speed in High Speed*: 20 mm/s • Approx. max. Y-working speed in High Speed for robot operation*: 20 mm/s • Y-axis accuracy: 0.004 mm • Oil capacity: 445 l • Main motor power: 22 kW • Weight: 15 t • Machine width [W]: 2050 mm Technical Specification Bending Length 3100 mm

Year of construction: 2011, operating hours: 3,800 h, condition: ready for operation (used), functionality: fully functional, McCloskey I54 impact crusher on tracks Chedpfox Npv Hjx Aknoc 2011 year 3800 genuine working hours on CAT C13 engine' 2900 crusher hours(new controller) Engine CAT C13 - 536 HP 53000 kg Inlet[mm]:up to 1200x1350 mm Max size of inlet materiał:800 mm CSS[mm]: 0-20 to 0-150 mm Capacity[t/h]: from 150 to 300 Feed hopper 6,8 m3 Fitted with overband magnet Fitted with prescreener Fitted with side conveyor 3-generator 31,5 kVA 400 V Wear plates 90% Blow bars 90% Machine in great working condition, can go straigt to work

Condition: good (used), Skid mounted Busch 630 vacuum pump in very nice condition. Direct from food factory. Chjdpfxeptbi Dj Aknjc

Condition: not inspected (used), Item: D-10737-Auger Bulk Feeder Stainless Steel Bulk Feeder with weight Stainless Steel auger Ø6" (150 mm). Chjdpshn S Efjfx Aknjc Dimension: Bulk L 980 mm X W 980 mm x H 700 mm Auger: Max H 2400 mm Discharge 1900 mm Opening at bulk top: 700 x 700 mm One side at wheels

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve Chsdjg Ey T Espfx Aknjc -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: ready for operation (used), Year of construction: 2017, pressing force: 41 t, stroke length: 200 mm, overall weight: 4,000 kg, Press brake manufactured in 2017. This Bystronic Xpert 40/1030 features a press force of 400 kN and a bending length of 1030 mm. It includes a ByVision Bending control system and a 6-axis backgauge for enhanced precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 40/1030 machine we have for sale. Contact us for further details. • Control: ByVision Bending • Backgauge: 6-axis • Interface: OPC • Oil cooling system • Safety system: Fast Bend G2 • Electrical: 3-phase 400V / 50 Hz • Main motor power: 7.5 kW • Made in Germany • The PLC Runtime is 1812 hours • The Robot Runtime is 140 hours. Additional equipment • Bystronic Mobile Bending Robot (Integrated robotic bending cell) • Year of manufacture: 2017 • Electrical: 3-phase 400V / 50 Hz • Power consumption: 3 kW • Pneumatic pressure max: 8 bar Cjdpfsy Tw R Tex Aknshc • Weight: approx. 1000 kg LIST OF TOOLS Bystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=300 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=275 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=200 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=100 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=50 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=30 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=20 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=15 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=10 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=275 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=200 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=100 mmBystronic P5RFA/30° Left Angle – 750 kN/m – R=1 mm – H=250 mm – L=100 mmBystronic P5RFA/30° Right Angle – 750 kN/m – R=1 mm – H=250 mm – L=100 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=50 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=30 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=20 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=15 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=15 mm Technical Specification Bending Length 1030 mm

Condition: excellent (used), Year of construction: 2005, operating hours: 7,480 h, functionality: fully functional, overall weight: 33,500 kg, fuel type: diesel, Terex Pegson Trakpactor 428 on tracks 2005 year 7480 genuine working hours on John Deere CAT C9 33500 kg Inlet[mm]:up to 1067x711 mm Max size of inlet materiał: 400 mm Csdpoyazl Hefx Aknohc CSS[mm]: 0-20 to 0-100 mm Capacity[t/h]: from 100 to 200 Feed hopper 3,68 m3 Fitted with overband magnet Side conveyor can be bought. Wear plates 90% blow bars martensitic-ceramic Machine in great working condition, can go straigt to work