Primary Tire Shredder (150 mm)

Columbus McKinnon Barclay Rotor-shred

Condition: good (used), functionality: fully functional, BAGGING, PALLETIZING AND WRAPPING LINE Composed of: AUTOMATIC WRAPPING MACHINE of plastic film for bag forming and filling. INNO TECH" brand. Maximum film width 1300 mm (currently working with 960 mm film). 2 forming tubes. Automatic weighing scale. Exit belt. Structure. ROBOT "ABB PALLETIZER", Model "ABB IRB M 2000 KGS". Bag loading tray and pallet placement. ROLLER CONVEYOR. ROTATING TABLE movable on rails. IMPROPACK TORNAJET" Brand ARM WRAPPING/WRAPPING MACHINE. Exit roller conveyors. Price of the set: 75.000 euros Independent elements can be sold. PERFECT CONDITION! Ksdpfx Ajttll Rsgzjfa Cantabria-SPAIN

Condition: used, Year of construction: 2021, operating hours: 4,826 h, Equipment: Basic package Inventhor Type 9 MTU diesel engine 6R1300, 390 kW at 1,700 rpm meets EUROMOT V emissions standard Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW – VARIO - Load sensing system Fuel tank 950 liters Longitudinal belt: belt length 4,450 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electric control Additional electric pump for operating the following functions when the engine is not running. Raise/lower/fold rear belt, open/close comb flap, open/close comb, raise/lower optional permanent magnet belt, raise/lower optional folding funnel Radio remote control complete Large side GRP maintenance doors Maintenance-friendly engine compartment with LED light Hydraulically reversible fan wheel Loading protection on both sides Fire extinguisher Maintenance ladder Tool box Acoustic start-up warning Kfjdpfxevnmlde Agzea Doppstadt telematics system Paint: RAL2011 deep orange Special equipment: 500 mm chain chassis unit Chain chassis 500 mm flat Crushing system size "L" -VARIOMAT Size "L" - "Limiter" (20 pieces) Rear conveyor length 7 m 1200 mm wide LED light package engine compartment and rear Irrigation with funnel attachment H=300mm Frame for overband magnet Overband magnet 2 t permanent

Condition: reconditioned (used), Year of construction: 2007, -Primary impactor crusher, Laron Model IM 16 -Complete mobile or stationary assembly. -New rotor bearings -New rotor hammer bars Semi-new front palate Production capacity 800 Tm/hour. -Intake mouth 2320 x 1700 mm. Engine 600 hp. -New bearings and supports. -New rotor striker bars. -Feeder of articulated plates width 2000 mm length 10,000 mm. Reducer and motor 40 hp. Semi-new condition of the feeder. Pre-screener of discs width 2000 mm diameter 1000 mm. reducer and electric motor. -Hopper with capacity for 40 m3. screwed and dismountable by parts for its transport. -The whole set is mounted on a chassis with coupling for tractor head and transportable on dolly axles. Kfsdpjimwg Hefx Agzoa We have secondary hammer mills, screens and conveyor belts to complete a plant.

Condition: used, Year of construction: 2021, operating hours: 5,300 h, functionality: fully functional, overall weight: 35,000 kg, rotor diameter: 800 mm, rotor length: 3,200 mm, power: 310 kW (421.48 HP), rotational speed (max.): 100 rpm, rotational speed (min.): 20 rpm, If you are interested, just ask! Kfodpjvt Suhofx Agzoa

Condition: excellent (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Kfjdouu Upgopfx Agzja Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Capacity: 12-17 t/h Machine weight: 40 tons (+ diesel generator 4 tons) Hopper size: 3850mm x 2600mm x 1500mm Information: A scrap shear is used for economical scrap cutting: - simple automatic operation - Energy-saving - Cost-saving - No foundation required Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Inspection and trial operation are possible.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator. Drive power: 250 kW, control cabinet with frequency converter (year of manufacture 2019). In 05/2023, the rotor shaft was replaced with an exchange shaft, including new bearings and seals. Rotor length: 1200 mm Rotor diameter: 800 mm Number of knives/rotor: 36 pcs Number of knives/stator: 4 x 6 pcs 2 hydraulically swiveling stators, each with 2 rows of counter knives. Fine adjustment of the knives is performed hydraulically while the machine is running. Function 2: Coarse adjustment of the stators by 180° Hydraulic pusher Bearing temperature monitoring Kfedpfxew Am Nqs Agzea Central lubrication system for rotor bearings Net weight: 29,800 kg Year of manufacture: 2004, overhauled in 2025, all wear parts were renewed. The granulator has been overhauled and workshop tested, and is delivered ready for connection. Testing/demonstration available by appointment upon request.

Condition: used, Eldan Granulator HG129 Kfedpfx Agot Uyvrezoa

Condition: reconditioned (used), Year of construction: 2003, Complete plant Primary impact mill, 2320x1700 mm. Mobile Production capacity 800 t/h 0-40 mm Limestone Secondary two Laron Lau 8 hammer mills, 1620x700 mm opening. Kfjdpfxslwya No Agzoa

Condition: new, Technical Data: - Hopper opening: 1850 x 1250 mm - Hopper volume: approx. 3.0 m3 - Rotor diameter: 500 mm - Rotor length: 650 mm - Rotor speed: 80 rpm - PLC control - Motor–gearbox: 18.5 kW - Control cabinet (completely wired) incl. 5 m cable - Automatic star-delta start - Weight: 3600 kg - Performance depends on material Main applications and processable materials: - Recycling and volume reduction of non-ferrous metals - Recycling and volume reduction of wood waste - Recycling and volume reduction of plastics and foam / Styrofoam Kedpfx Agowb Sdqjzsfa - Recycling and volume reduction of electric cables and coils - Recycling and volume reduction of plastic containers and composite materials

Year of construction: 2002, condition: used, functionality: fully functional, Electric overbelt magnet with a 1400 mm wide band, the main dimensions are approximately 3500x2000x900 mm (lxwxh) Kfsdpfxeiyx Eyo Agzsa