Used CNC-processing machines for sale (5)

Condition: new, Year of construction: 2024, axis 920 mm x-axis 3000 mm material thickness Z 12 mm - 30 mm feed speed 20 m/min. A - axis 360 degrees Minimum dimension: plate: x = 300 mm Y = 120 mm Dkjb Escnz H Hexg Anol z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. depth Depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required suction capacity: 2300 m3/h Location: Ex stock 54634 Bitburg - immediately available -

Year of construction: 2014, Condition: excellent (used), Axle 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A - axis 360 degrees Minimum dimension: Plate: x = 300 mm Dkjb Eofmdcqexg Anel Y = 120 mm z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. bottom depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required extraction capacity: 2300 m3/h Location: comes to warehouse 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale Dkob Eewdny Toxg Anel

Condition: ready for operation (used), Year of construction: 2008, ROVER A 3.30 K4 - CNC machining center Working area: X = 3060 mm; Y = 1260 mm; Z = 150 mm 9080345 Automatic lubrication system 6 ATS workpiece supports - L = 1200 mm - 18 module supports 6 stops with 115 mm stroke 6 stops with 15 mm stroke positioned 970 mm from the rear Side stops with 15 mm stroke, complete with pneumatic equipment Narrow part clamps 12 vacuum modules 132 x 146 x H48 mm 6 vacuum modules 132 x 75 x H48 mm Chip conveyor belt integrated into the machine bed Vacuum pump 250 m3/h Auxiliary vacuum system Flange for preparing a milling spindle for use with an angle unit 360° C-axis Drill head BH 21 L Turret tool magazine with 18 pockets Remote control functions CNC control XP600 Graphical operator interface BIESSEWORKS Air conditioning system Safety devices with two front safety mats and rear and side protective grilles 7350283| Division of the vacuum system into two independent work areas in X. Division of the pneumatic system into two work areas in X. 7300510| Chip conveyor belt integrated into the machine bed 50820 250 m3/h vacuum pump instead of the 90 m3/h pump WORK UNITS Dkob Exg Ajwdnqxensl 7212013| 360° rotating work unit (C-axis) with gear drive, for machines with preparation 7212006| 12 KW (16.1 HP) electric spindle with HSK F63, air-cooled NC-Hops 4-axis machine license version 4 The tool shown is not included in the scope of delivery. Location: from customer location - Available: end of May 2025 -

Condition: new, Year of construction: 2024, CNC machining center ROVER A SMART 1632 Working area X = 3280 mm Y = from 1580 to 1660 mm, according to the working conditions Z = 200 mm - 5-axis machining unit and drilling unit, with vacuum modules H 74 mm Z 245 mm - 5-axis machining unit and drilling unit, with vacuum modules H 29 mm Workpiece passage: Y = 1900 mm Axis travels X = 3706 mm Y = 2294 mm Z1 = 515 mm Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. The machine has been designed to work with up to 2 pumps among those available. The electro-pneumatic pre-equipment is adequately dimensioned according to the number and type of pump selected. ASSISTING VACUUM SYSTEM - 2 areas It allows the clamping of workpieces through vacuum templates. 6 ATS workpiece supports 18 module supports Work table SA (Set-Up Assistant) for work tables up to 1550 mm. Supported manual positioning system with direction indicator and position indicator. Work table for processing solid wood. Dob Exgsufggws Anjkl Subdivision of the pneumatic system into 2 working areas in X Rear row fence with 115 mm stroke and 25 mm fence extensions. The fences, pneumatically lowerable and CNC-controlled Stop of the middle row, positioned at 1080 mm, with 140 mm stroke. 4 side stops with 140 mm stroke complete with pneumatic equipment. 2 additional side stops with 140 mm stroke Sensor for monitoring the lowering of the stop. 4 positioning aids for vacuum module height = 74 mm 250 m3/h vacuum pump Vacuum module 132 x 146 - H74 mm Vacuum module 132 x 75 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles. Vacuum module 132 x 54 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles Chip conveyor belt Automatic lubrication system Machining unit with 5 interpolating axes 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled 11 KW (15 HP) from 12,000 rpm to 20,000 rpm, use S1 13 KW (17.4 HP) from 12,000 rpm to 20,000 rpm C-axis: 360° endless rotation Suction hood with 12 NC-controlled positions for electrospindle with 5 axes Coolant system Additional Z-axis support for rear machining units, with independent Z-axis BH 24 L drilling head 13 individually retrievable vertical drilling spindles with 32 mm pitch, 8 in X and 5 in Y 5 horizontal drilling spindles with double output and center distance 32 mm, 3 in X + 2 in Y 1 grooving saw in X d120 mm Turret tool magazine with 16 places, installed directly on the machining unit X Lateral tool magazine with 12 pockets in the machine bed HSK F63 tool holder, equipped with a long integrated flange, for saw blades on 5-axis head Digital devices for measuring the tool length with d up to 130 mm software B-Solid SOPHIA - IoT Connection SmartConnection NC-Hops 7.0 machine license 4-/5-axis NC-Hops 7.0 1.AV License 4-/5-axis Location: ex stock 54634 Bitburg - immediately available -