Second-hand machinery for sale (296)

Condition: new, Year of construction: 2025, The Hebrock K 36 Top equipment with motorized adjustment - Exhibition piece - New machine - - immediately available - This Hebrock endurance racer offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily use. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock is setting new standards in the field of perfect edge processing of various edge thicknesses. max. edge thickness: 3 mm max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 60 mm Min. workpiece length approx. 140 mm Feed speed approx. 15 m/min. Ready for operation approx. 6 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 5250 x 1230 x 1430 mm (LxWxH) Weight 1750 kg Equipment: Hebrock K 36 - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touch screen), hot melt adhesive application to the workpiece workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 3 mm routing depth, maintenance-free, coated glue tray with HF double-motor cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with pneumatic trimming adjustment and interchangeable panel trimmer (combi version), corner rounding trimmer, radius scraper, surface scraper (incl. cleaning station, robust chain drive, ball-bearing mounted double roller top pressure, unit viewing window from the rear of the machine and operator side, signal lamp for workpiece sequence, extendable workpiece support, feed approx. 15 m. support, feed rate approx. 15 m/min, gluing up to 60 mm workpiece thickness 36/08/1 Quick-change equipment for corner router 36/08/2/1 additional exchangeable motor corner router R=1 36/09/1 Multi-radius scraper 36/24/1 Release agent spraying device 36/24/2 Cleaning agent spraying device 36/25 Protective spraying edge Djlq Epji Am Uke A Iekl 36/27 Nesting (1x milling station + 1 x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/bevel) 36/45 Axis package Motorized adjustment of panel, edge thickness and joint milling depth jointing depth adjustment Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: ex stock 54634 Bitburg Dkoloi Anadoq Ep A Ijl Available in calendar weeks: 4/2024

Year of construction: 2017, Condition: excellent (used), Stationary piston compressor with 500 L tank Air outlet ¾" Dimensions and weights Djlqolczl Us Ep A Ijkl Length (product) approx. 2020mm Width/depth (product) approx. 570mm Height (product) approx. 1340mm Weight (net) approx. 245kg Electrical data Supply voltage 400V Mains frequency 50Hz Output power 5,5kW input power 6,52kW Noise emission Sound pressure level Lp 83dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Compressor Compressor system HOS Suction capacity approx. 950l/min Filling capacity approx. 750l/min Explanation Filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 960min¯¹ Compressed air tank Maximum pressure 10bar Tank capacity 500l Location: Ex stock 54634 Bitburg - immediately available -

Year of construction: 1991, Condition: excellent (used), Frommia long hole drilling machine Type: 770 drill holder : drill chuck with key max. drill diameter : 1 - 20 speeds : 2900 rpm max. drilling depth : 145 mm operation : two-hand operation of height adjustment : hand wheel reading of height adjustment : scale clamping cylinder actuation : hand eccentric types of construction : movable drilling head table width : 560 mm table depth : 300 mm working height or feed table height : 900 mm weight approx. : 220 kg dimension : 1200 x 900 x 1200 mm Motor power : 1.5 kW power supply ca. : 400V / 50 Hz / 4.8 A / 2,2 kW Delq Eelc Eurep A Ijkl Accessories : some drills Location : ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2024, CNC machining center ROVER A SMART 1632 Working area X = 3280 mm Y = from 1580 to 1660 mm, according to the working conditions Z = 200 mm - 5-axis machining unit and drilling unit, with vacuum modules H 74 mm Z 245 mm - 5-axis machining unit and drilling unit, with vacuum modules H 29 mm Workpiece passage: Y = 1900 mm Axis travels X = 3706 mm Y = 2294 mm Z1 = 515 mm Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. The machine has been designed to work with up to 2 pumps among those available. The electro-pneumatic pre-equipment is adequately dimensioned according to the number and type of pump selected. ASSISTING VACUUM SYSTEM - 2 areas It allows the clamping of workpieces through vacuum templates. 6 ATS workpiece supports 18 module supports Work table SA (Set-Up Assistant) for work tables up to 1550 mm. Supported manual positioning system with direction indicator and position indicator. Work table for processing solid wood. Subdivision of the pneumatic system into 2 working areas in X Rear row fence with 115 mm stroke and 25 mm fence extensions. The fences, pneumatically lowerable and CNC-controlled Stop of the middle row, positioned at 1080 mm, with 140 mm stroke. 4 side stops with 140 mm stroke complete with pneumatic equipment. 2 additional side stops with 140 mm stroke Sensor for monitoring the lowering of the stop. 4 positioning aids for vacuum module height = 74 mm 250 m3/h vacuum pump Vacuum module 132 x 146 - H74 mm Vacuum module 132 x 75 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles. Dkslq Epjufggwe A Iel Vacuum module 132 x 54 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles Chip conveyor belt Automatic lubrication system Machining unit with 5 interpolating axes 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled 11 KW (15 HP) from 12,000 rpm to 20,000 rpm, use S1 13 KW (17.4 HP) from 12,000 rpm to 20,000 rpm C-axis: 360° endless rotation Suction hood with 12 NC-controlled positions for electrospindle with 5 axes Coolant system Additional Z-axis support for rear machining units, with independent Z-axis BH 24 L drilling head 13 individually retrievable vertical drilling spindles with 32 mm pitch, 8 in X and 5 in Y 5 horizontal drilling spindles with double output and center distance 32 mm, 3 in X + 2 in Y 1 grooving saw in X d120 mm Turret tool magazine with 16 places, installed directly on the machining unit X Lateral tool magazine with 12 pockets in the machine bed HSK F63 tool holder, equipped with a long integrated flange, for saw blades on 5-axis head Digital devices for measuring the tool length with d up to 130 mm software B-Solid SOPHIA - IoT Connection SmartConnection NC-Hops 7.0 machine license 4-/5-axis NC-Hops 7.0 1.AV License 4-/5-axis Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin T 27 Flex tilting spindle moulder - can be tilted on both sides - Dkjlqjr Hr D Ns Ep A Iol Flexibility for today and tomorrow. Setting up a tilting spindle moulder is normally a major challenge. Not on the T27 Flex with its modern touchscreen control: thanks to the integrated tool offset, you can set up even complex milling patterns with a tilted spindle in no time at all. Only in this way can the large swivel range of 2 x 46° be used efficiently - and you can fully follow your inclinations. In addition, the machine can be tailored precisely to the individual requirements of your business. Equipment: T 27 Flex T 2711-a Digital display of infeed jaw position in the control unit T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex protection T 2742-a Integral fence incl. filling rod T 2790-La Console for feed stand attachment left The photo only shows an example machine / feed is not included Location: Comes to stock 54634 Bitburg - available in two weeks -

Condition: excellent (used), Year of construction: 2001, Kity 629 rotary tiller Motor 2,2 KW/400 Volt Table size approx. 580x715 mm Finely adjustable milling fence spindle swivel + 30° to - 5° Right/left rotation of the milling spindle Speeds 4800/6400/8700 rpm Spindle stroke 130 mm Tool up to Ø 180 mm Suction connection 2 x 100 mm Location: ex stock 54634 Bitburg - immediately available - Dkjler Id S Eeq Ep A Isl

Condition: good (used), Year of construction: 1995, Maka universal edge sanding machine with oscillating sanding belt Type: KSM 150/2 Oscillation: yes Solid sanding device: yes Funnel sanding device: yes Can be tilted up to: 45 - 0 + 45° degrees Motor power: 2.0 kW Suction nozzle Table size: 1440 x 220 mm Weight: 530 kg Sanding sleeve device CE marking Location: ex stock 54634 Bitburg - immediately available - Delq Eer Igtrep A Iekl

Condition: excellent (used), Year of construction: 2000, Eumacop band saw type: ER 600 - very good condition - Model ER 600 Machine type band saw Year of manufacture 2000 Technical data Roller diameter: 600 mm Passage width: 585 mm Passage height: 395 mm Total height of the machine: 2,115 mm Maximum saw blade width: 35 mm Maximum saw blade length: 4,725 mm Dkjlqjvr H Nwe Ep A Isl Main motor: 2.2 kW Top roller guide APA Bottom roller guide APA Version: left-hand machine Conformity marking: CE mark Total connection: 2.2 kW Weight approx.: 275 kg Space requirement Length: 0.75 m Width: 1.1 m Height: 2.22 m Location: from stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2018, Stationary piston compressor with 2x 100 liter compressed air tanks and dryer with bypass AIRPROFI DUO 703/2x100/10K Universally applicable compressed air station with 2 x 100 L compressed air tanks, fully assembled on a safety pallet, space-saving and transportable Article number 2023072 Two-stage, 2-cylinder high-performance unit with gray cast iron cylinder block The low speed ensures quiet, low-vibration operation and a long service life Large fan wheel for optimal cooling Quality electric motor with high starting torque Electric motor equipped with motor protection switch With phase inverter for easy manual reversal of the direction of rotation Intermediate and aftercooler reduces the formation of condensate Maintenance block with two pressure gauges for tank pressure and working pressure and high-quality CONDOR pressure switch Fifteen-year guarantee against rust on hot-dip galvanized parts inside and out Compressed air tank Fully automatic on/off operation Ready for connection with all fittings Increased flexibility By connecting the second compressed air tank, the tank volume is doubled, which means that a higher air supply can be built up An increased air requirement can thus be covered at short notice. The second compressed air tank can be separated from the compressed air supply, for example for chiseling or sandblasting work. This halves the tank volume and the pressure is built up more quickly. Equipment details: K version with refrigeration dryer with integrated automatic condensate drain as standard Pressure dew point 5 °C, compressed air inlet temperature 35 °C, cooling air temperature 25 °C TECHNICAL DATA General information Air outlet 3/4" Dimensions and weights Length (product) approx. 1200mm Width/depth (product) approx. 900mm Height (product) approx. 1250mm Weight (net) approx. 235kg Electrical data Connection voltage 400V Mains frequency 50Hz Output power 4kW Input power 4.81kW Noise emission Sound pressure level Lp 83dB(A) Explanation of sound pressure level Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor Compressor system HOS Suction capacity approx. 650l/min Filling capacity approx. 520l/min Explanation of filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 950min¯¹ Compressed air tank Maximum pressure 10bar Tank capacity 200l Djlq Esvlkwrsp A Iekl Remarks Tank capacity 2 x 100 l Location: from stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2018, operating hours: 619 h, Weima briquetting press C 140 top condition Only 619 operating hours Year of manufacture 2018 Compact design, high reliability and an excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood, polystyrene, foam or paper. Dkolq Epevlv N Tj A Isl Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Total dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput (kg/h) 30-40 Hydraulic oil quantity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated pliers Pre-compressor with end-position dampened cylinder and screwed cover Switch box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: good (used), Year of construction: 1986, Hoffmann Dübelfix chain mortiser with pneumatic lift - very good condition - Pneumatic tensioner Revolver stop Material support Pneumatic foot pedal Location: from stock 54634 Bitburg Delq Epevk Dqvj A Iskl - immediately available -

Condition: excellent (used), Year of construction: 2018, Used Maagi Junior 640 miter saw - Excellent condition - Motor power: 4 HP, 3 kW, three-phase motor Dkjlq Epewg S T No A Iol - Motor speed: 2800 rpm - Saw blade diameter Ø 350 mm - Saw blade bore diameter Ø 30 mm - Shaft dimensions Ø 25 x 80 mm - Extractor nozzle in the saw blade cover Ø 60 mm - Extractor nozzle in the extractor hood Ø 100 mm - Working width 975 x 1580 mm - Cutting width Ø 350 20 x 550 mm - Cutting width Ø 400 100 x 545 mm - Cutting length at maximum thickness Ø 350 100 x 480 mm - Cutting length at maximum thickness Ø 400 125 x 450 mm - Max. cutting height Ø 350 100 mm - Max. cutting height Ø 400 125 mm - Max. saw blade distance from the table Ø 350 70 mm mm - Max. saw blade distance from table Ø 400 45 mm - Cutting height at 45° Ø 350 60 mm - Max. cutting height at 45° Ø 400 80 mm - Max. cutting height at 45° right 20x380 > 100 x 330 mm - Max. cutting height at 45° left 20x190 > 100 x 140 mm - Net weight 180 kg - Gross weight 220 kg - Packaging dimensions 1400 x 850 x 530 mm Location: ex warehouse 54634 Bitburg - Available immediately -

Condition: not inspected (used), Year of construction: 1996, Edge banding machine IMA Compact S 312 Year of manufacture: 1996 Trimming unit, radius, bevel, flush trimming unit, profile scraper, flat scraper, buffing unit Location: Arrives at the end of April at warehouse 54634 Bitburg - Free shipping - Dkolq Epsv Tkv Re A Iol Sold as is, without warranty.

Condition: excellent (used), Year of construction: 1995, Manufacturer BGU Model RLG 2000 Type of machine: Mobile dust extractor Year of manufacture: 1995 Factory number: 17595151 Technical specifications Flow rate: 1,365 m³/h Intake nozzle: 140 mm Filter area: 11 m² Number of collection containers: 1 Vacuum pressure: 1,500 Pa Collection container volume: 350 l Main motor: 2.2 kW Dslqswh U E Ro Ep A Iekl Vibration: Manual Air system: Vacuum Filter category: H2 Conformity marking: CE mark Approx. weight: 280 kg Location: From stock, 54634 Bitburg - Available immediately -

Condition: excellent (used), Year of construction: 2017, 4-way combo HOLZKRAFT CU 410c F 26 N Tersa -- Technical specifications -- - Circular saw - Cutting length 2,600 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 100 / 79 mm Max. cross-cutting width to the left of the saw blade 2,310 mm Cutting width at the parallel stop 900 mm Saw blade inclination 90° - 45° - Planer - Working width 410 mm Planer table length 1,660 mm Planer block diameter / number of planer knives 72 mm / 3 pcs. - Thickness - Table dimensions 410 x 605 mm Min./max. Working height 3 / 230 mm Max. chip removal 4 mm Feed rate 7 m / min -Table router - Useful spindle length 100 mm Max. tenon tool diameter 275 mm Max. tool diameter 210 mm Spindle speed 3,500 / 6,000 / 10,000 rpm Spindle diameter 30 mm - General - Djlqowaq Tbs Ep A Iskl Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction nozzle diameter 4 x 120 mm Extraction nozzle diameter saw blade guard 60 mm Location: From stock, 54634 Bitburg Free shipping - Delivery as is - no warranty - - no warranty -

Condition: new, Year of construction: 2024, Martin T 77 panel saw - new stock machine - Equipment: T 7710/1-a saw unit 1 x 46 degrees T 7725/2-a cutting height 205 mm T 7715/3-a drive power 7.5 KW infinitely variable T 7730/3-a trimming table length 3.0 m T 7735/3-a cutting width 1350 mm T 7743-a parallel stop electronically controlled and can be lowered to the end position T 7750-a electrical preparation for retrofitting a scoring unit T 7780/1-a table extension at the rear 610 x 860 mm Location: from stock 54634 Bitburg Dslqovn Ef No Ep A Iokl - available immediately -

Condition: new, Year of construction: 2025, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Dslev Sg T Neq Ep A Iokl Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base

Condition: ready for operation (used), Year of construction: 1991, Manufacturer: OSMEKA Model: HZ 2100 Machine type: Chopper Year of manufacture: 1991 Operational status: Still connected Dkelq Ep Aov Trm Do Ijl Technical specifications: Chopping unit speed: 650 rpm Number of shafts: 1 Screen hole diameter: 10 mm Main motor: 15 kW Automatic reverse start-up Replaceable individual blades Top loading Chopping tool: Strip blade Weight: approx. 960 kg Space required: length: 1.7 m Space required: width: 1.2 m Space required: height: 1.5 m Location: Still in operation. Arrives at the end of April at warehouse in 54634 Bitburg. Sold as is - as seen - No warranty - no guarantee - free on freight.

Condition: excellent (used), Year of construction: 1998, Used Scheppach RG 4000 dust extractor - dust-tested Technical specifications Hose length: 2500 mm Hose connection diameter: 100 mm Motor power: 1.5 kW, 50 Hz / 400 volts Mobile Extraction drum Dolq Eswb Hqxep A Iskl Availability: Immediately Storage location: 54634 Bitburg

Condition: excellent (used), Year of construction: 2001, GEKA R 8 three-roll bending machine, 2040 x 1.0 mm, used Delqowhf T Se Ep A Iskl - Three-roll, asymmetrically mounted, made of high-strength steel - Side stand with solid welded construction - Quick rear roll adjustment - Crowned rollers to compensate for deflection - Bending length 2040 mm - Weight approx. 300 kg - Year of manufacture 2001 Location: arriving at warehouse 54634 Bitburg - Available at short notice