Second-hand machinery for sale (296)

Condition: new, Year of construction: 2025, Optimum Optisaw SD 500 Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges Dshsgd Si Eoxzi Ahokl 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc [...]

Condition: as good as new (ex-display), Year of construction: 2025, SRF master figure left 2 m suction arm Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Djhsdqzbrjxzi Ahekl Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: as good as new (ex-display), Year of construction: 2025, Panhans band saw BSB 500 upper and lower APA II bandsaw guiding system swivelling table top up to 45 Dkohxzsdq D I Hji Ahel door safety by limit switch wheel diameter 500 mm drive motor 1,5 kW / 2,0 PS motor 400 Volt with motor brake belt speed 1.290 m/min. cutting height max. 320 mm cutting width max. 485 mm blade length max. 4.145 mm table size 500x680 mm table height 890 mm Suction nozzle 2x100mm space requirement: 900x525x1925 mm Weight 220 kg CE-conform, GS-tested ex stock 54634 Bitburg

Year of construction: 2025, Condition: new, Vacuum lifters BARBARIC swiveling, including hoists, equipment package consisting of: -Vacuum lifters of uniWood B3-90 degrees - 250 comfort version, with integrated chain hoist increased load capacity: 250 kg Suitable for the vertical and horizontal transport of flat standard plates. Vacuum generation is pneumatically by means of ejector. For lifting of permeable materials (MDF of 8 mm thick), which is Reinforced Vakkumpumpe installed. -Technical data- Chain hoist lifting speed: 0-10 m / min stepless by frequency converter Lifting height (operating range): 2.0 m Length of chain: approx. 3.5 m operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: ca. 85 kg -Security system - the lift is equipped with a vacuum gauge. Release the load by means of 2 buttons -Hoists BARBARIC Load capacity 250 kg to the hoist Consisting of: Column, console and smooth-running boom. Delivery including Schiebefahrwerk and energy supply. Height: approx. 4, 2 m Bottom bracket: approx. 3.5 m Throat depth: 5 m Swivelling area approx. 250° Panning and cross travel by hand Base plate with 700 x 700 mm and mounting material. Dkshxzi Ajc Umftshel Supplied with adhesive anchors for concrete floor. This fixture requires a similarly proven concrete floor. The static verification of soil is on site to do and accordingly to document. Others

Condition: new, Year of construction: 2025, Glue spreading machine / Glue roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) working width: 1.300 mm max. passage height: 100 mm speed: 18 m/min working height: 900 mm diameter of application rollers: 185 mm connected load: 0,5 Hp 0,37 KW operating side: right Electricity: 400 V/ 50 Hz/ 3 phases Technical equipment: - Structure of the glue spreader made of welded sheet metal. - 1 motor for driving the two rollers - Glue spreader rollers covered with acid-resistant special rubber, form-ground and grooved, wear-resistant. - The thickness of the rubber layer can be shape ground several times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to max. 5 mm on the workpieces. - Glue dosage by means of zinc sheet distribution tray. Easily extractable for cleaning. Dshxzi Aod Iz Dfehekl - 1 handwheel to adjust the opening of the rollers. - Accident prevention protection of the rollers - Electrical components according to the highest quality standard - CE standard

Year of construction: 2014, Condition: excellent (used), Axle 920 mm x-axis 3000 mm Dohxzi Asfmdcqshjkl Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A - axis 360 degrees Minimum dimension: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. bottom depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required extraction capacity: 2300 m3/h Location: comes to warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables in one piece allow easy dressing of the workpieces Worktables are made of grey cast iron, therefore insensitive and permanently flat Backward opening dressing tables with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time Helical toothed steel infeed roller ensures constant and even wood infeed Rubber pull-out roller in the thickness outlet ensures even wood pull-out Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planing height DIGITAL version: with electrical thicknessing table height adjustment and digital display On and off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for long hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Weight approx. 695 kg Dresser Total length of the tables 2250 mm Dshxzeff Hdpei Ahekl Chip removal max. 5 mm Stop length 1200 mm Fence height 150 mm Dust extraction connection Suction nozzle diameter Thickness 1 x 120 mm Drive power Main engine 7 kW Installation information Space requirement Length 2250 mm Space requirement width/depth 1440 mm Explanation Place [...]

Condition: new, Year of construction: 2025, The Hebrock F 2 Dkshxzi Aslht Hzjhsl The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: new, Year of construction: 2025, Rojek sliding table saw PF 350 industry - execution The machine design has many technical innovations that increase useful utility properties of this machine. The high quality workmanship makes this sliding table saw the best in its class. The machine is standardly equipped with aluminum sliding table CV 360T with very precise and firm fixing on hardened bars. The machine can be equipped with an aluminum sliding table of multi-chamber, very rigid construction CV 400T, precise and rigid version with steel bar fixing. Aluminum sliding table size 400 x 3200mm. The precision and reliability are guaranteed by massive swivel segment guide of the saw mechanism in the robust cast iron body and scoring unit with separate motor. TECHNICAL SPECIFICATIONS Saw Motor power S6 40% 7,5 kW/3×400 V Motor speed 2 870/min Max. Saw blade diameter with scoring Ø 350 mm Dkehen D Arhjxzi Ahjl Spindle diameter 30 mm (1″) Saw blade spindle speed 4 450/min. Max. Cutting height 120 (83 [45°]), Saw blade tilting 0° ÷ 45°. Max. Cutting width 1 300 mm Scoring unit Motor power of scoring unit 0,75 kW (1 Kw) Saw blade diameter Ø 120 mm (100 mm) Spindle diameter Ø 20 mm Speed of rotation 8 530/min Machine dimensions length 3 355 mm width 3 450 mm Table height 892 mm Max. Machine height 1 460 mm Table size 1 185 x 500 mm Suction pipe diameter 100 + 100 mm Gross weight 680 kg Net weight 675 kg Aluminum sliding table CV360T table size 3 200 x 360 mm Support frame size 1 240 x 650 mm cutting length 3 200 mm Power line fuse 16 A (25 A) Noise level (without technology) 81,8 dB(A) Noise level (with technology) 85,3 dB(A) Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2022, Drilling depth 170 mm Drilling width 250 Speed 2800 rpm HOLZKRAFT long hole drilling machine LLB 30 Entry level long hole drilling machine with single hand lever, eccentric clamp, dowel drilling device and drill head height adjustment with handwheel and numerical display for fast and precise working working table (LxW): 580 x 300 mm drilling width: 250 mm drilling depth (at 90°): 170 mm drill head height adjustment: 200 mm working table rotation range: not rotatable tool holder: WESCOTT drill chuck tool clamping range: Ø 0 - 20 mm Dkehxzieih H A Rj Ahsl spindle speed: 2.800 min-1 motor power: 2,2 kW | 400 V - 50 Hz suction nozzle: Ø 70 mm dimensions (LxWxH): 1500 x 920 x 1400 mm Weight (net): approx. 160 kg Including dowel drilling device, eccentric clamp, numerical display height adjustment, Wescott drill chuck 0-20 mm HOLZKRAFT LLB 30 slot drilling machine - entry-level machine for professional slot drilling - Made in EU Easy operation via one-hand lever for fast and precise work Drill head with hardened prism guides and bearing with ball contact system Drill head height adjustment with hand wheel and numerical display Manual eccentric clamp Sturdy cast steel construction Powerful three-phase motor Dowel device with grid position 16 | 22 | 27 | 32 mm Clamping stops allow easy and quick adjustment of the drill head run Scope of delivery HOLZKRAFT LLB 30 slot mortising machine Drill head height adjustment with hand wheel and numerical display Dowel drilling device with grid Eccentric clamp Wescott drill chuck 0 - 20 mm Instruction manual with exploded views, spare parts lists and CE- Declaration of Conformity Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Sizing saw minimax sc 4e 27 with scoring device With tiltable saw blade and sliding carriage made of anodized aluminum for the demanding user Item number 5504528VR Brand: Holzkraft Weight (net) approx. 473kg Suction port diameter 120mm Suction port diameter saw blade guard 60mm Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Rated operation mode drive motor S6 Duty cycle drive motor 40% Sliding carriage and table sliding table length 2600mm Format sliding carriage width 360mm Format sliding carriage height 142mm Table length 840mm Table width 560mm Dshxzisibwulo Ahokl table height 900mm Circular saw unit Cutting width with rip fence 900mm Max. Trimming width left of saw blade 3200mm Trimming length 2660mm Saw blade inclination 90 - 45 Max. Cutting height 90° 100mm Max. cutting height Cutting height 45° 63mm Explanation max. cutting height Independent of scoring blade Diameter saw blade 315mm Explanation Diameter of saw blade Independent of scoring unit Saw blade speed 4000min¯¹ Scoring unit Diameter scoring saw blade 100mm Speed of scoring saw blade 8000min¯¹ EQUIPMENT Equipment Scoring unit Drive by motor of main saw blade via flat belt, with saw blade Ø 100 mm Anodized aluminum format sliding carriage ✔ Handle for sliding carriage ✔ Material roller on edging frame ✔ Saw parallel fence with round bar guide Fence Two professional folding fences Trimming shoe ✔ Eccentric clamp ✔ Table widening ✔ Table extension ✔ Saw blade protection hood ✔ Location: ex stock 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dkohxeqlckpszi Ahol Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, ST 3 classic F 23 - Combined sawing-routing machine With tiltable saw blade, tiltable milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast iron table Djhocnwydexzi Ahjkl High-precision format sliding carriage made of anodized aluminum (travel 2250 mm) Large extension arm (900 x 600 mm) with telescopic aluminum stop Max. Saw blade Ø 315 mm with scoring device, swiveling from 90°-45°. Saw parallel fence with fine adjustment Stable sawing unit and large dimensioned double cradle frame unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3.500 - 10.000 min-1 With right-left rotation of the milling spindle Standard arc milling protection hood Two 5.0 kW motors with high power reserves Cast iron milling unit top mounted on both sides precision ball bearings on top close to the lever point four optimally graduated milling speeds, enabling the grinding of workpieces Powerful motors Industrial motor, 100% duty cycle suitable for continuous use (full load) Scope of delivery: Curved fraise protection hood anodized aluminum format sliding carriage aluminum stop jaws folding stop jaws Technical data Dimensions cast iron worktable 1112 x 430 mm working length 2250 mm max. saw blade Ø with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. cutting width 2660 mm saw blade tilting 90° - 45° cutting width 900 mm speed 4000 1/min. table cutter - spindle tilting 90° - 45 useful length of spindle 100 mm max. tool Ø 210 mm max. tenon tool Ø 275 mm max. tool-Ø retractable 180 mm speeds 3.500/7.000/10.000 1/min. General - motor power 400 V/50 Hz/S6 40% 2 x 5,0 kW ( 6,6 PS) Weight 470 kg Suction nozzle-Ø 2 x 120 mm Suction nozzle-Ø saw blade guard 60 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, " Products " Woodworking " Holzkraft " Sizing circular saws Series SC 3 classic - Small size circular saws Cutting plane directly on the roller table Precision-guided sliding table made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable Extendable aluminum telescopic fence, angle adjustable with professional stop flaps Rip fence with quick clamping and fine adjustment The standard table widening and table extension allow easy working with larger workpieces The large dimensioned sawing unit made of cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron remains permanently flat Heavy steel cast iron construction Quiet running and precise cuts Equipped with powerful three-phase motor Maximum cutting height is achieved even with pre-scoring device installed (pre-scoring device optional) Scope of delivery: Table extension and table extension Anodized aluminum format sliding carriage Aluminum folding fence Rip fence with round bar guide and fine adjustment Model SC 3 classic 26 Article no. 5504326VR Technical data table dimensions 840 x 560 mm table height 900 mm trim length 2600 mm cutting height max. 90° with scoring 100 mm Dohxzi Aecnxapohskl cutting height max. 45° with scoring 82 mm max. clearance width to the left of the saw blade 2310 mm cutting width with rip fence 900 mm inclination of saw blade 90 - 45 ° saw blade Ø max. with scoring 315 mm saw blade Ø max. without scoring 315 mm scoring saw blade Ø (option) 80 mm 4000 min-1 Main saw blade speed 4000 min-1 Speed scoring saw blade 8000 min-1 Electrical connection 400 V / 50 Hz Motor power 5,0 kW Suction nozzle diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Weight 380 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, LAB 300 PLUS F 16 TERSA - Universal multiple combination with aluminium sliding table and three milling speeds for sawing, milling, planing/thickness planing and optional slot drilling torsion-resistant cast steel construction machine table made of grey cast iron, hardened and ground light-weight anodized aluminium sliding carriage, 10 years warranty on wear of the guideways large trimming frame with extendable aluminium telescopic fence and folding fences with combi saw fence with 45° quick adjustment max. saw blade Ø 315 mm with optional scoring device, swivels from 90°-45° helical toothed steel infeed roller for uniform wood infeed when planing thicknesses four milling speeds, manually adjustable standard with right-left rotation of the milling spindle three independent motors for each working unit scope of delivery: Combi planer/parallel fence arched cutter guard Tersa cutterhead anodized aluminium sliding carriage aluminium stop jaws folding fence eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Article-No. 5500314 Technical data ---Technical data circular saw--- circumference 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm Dkehxziecnxa No Ahol max. clearance width left of saw blade 1660 mm cutting width at rip fence 800 mm saw shaft speed 3500 rpm. saw blade inclination 90° - 45 ---Technical data dressing--- working width 300 mm Dressing table length 1260 mm Ho

Condition: new, Year of construction: 2025, KRBS 101 Combined pipe, profile and belt grinder Convenient operation due to easily adjustable clamping device The rotatable clamping jaws of the clamping device allow safe clamping of square tubes, round tubes and flat steel Adjustable grinding angle from 30 - 90° and from 0° - 60°. Due to the optimised quick-change holder, the tensioning pulley can be changed easily and quickly without tools Particularly durable due to larger and improved roller bearings Practical tension pulley holders integrated in the substructure Extensive range of tension rollers for grinding different pipe diameters available as accessories Quick change between pipe grinding and belt grinding possible Dkshxecnz Ayszi Ahol Powerful motor Almost all adjustments can be made without tools (operating tool included) Large, hinged protective screen with optimum field of vision 2 belt speeds for optimum adaptation to the respective material (15 m/s best for stainless steel and aluminium, 30 m/s perfectly suitable for steel) With two easily removable chip collecting containers Suction nozzle (Ø 100 mm) for suction systems available Suction units available as accessories Further developed, vibration reducing substructure Scope of delivery: 1 x standard sanding belt grain K 36 2 x spit collection container 1 x screw wrench 1 x sanding roller 42 mm Model KRBS 101 Article no. 3921001 Technical data Mains connection 400 V Mains frequency 50 Hz Motor power 2.5 / 3.3 kW Sc

Condition: as good as new (ex-display), Year of construction: 2025, The captivating advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working climate due to diagonal low-turbulence air flow. Large airflow window due to air baffles - therefore also suitable for larger workpieces. Separation efficiency of paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² - therefore long filter life! Easy and quick filter change on the front side. Inexpensive replacement filters. Low purchase costs and extremely low energy consumption. Dry splashboard made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fibre filter as after-filter unit. Ex-fan incl. throttle valve mounted on the left. Do not compromise on the quality of the surface. Easy Paint extraction walls are the ideal cost-effective solution for effective collection and filtering of paint mist and extraction of solvent vapours. Robust and powerful but economical in consumption. The IPE double filtration system provides two filter stages for a maximum separation efficiency of up to 99 %. The cardboard labyrinth filter initially absorbs considerably more overspray (up to 18 kg/m² filter surface) than conventional filter mats due to the folded filter pockets. The downstream glass fibre secondary filter absorbs only the finest residual particles. As a guide value, the cardboard labyrinth filter, depending on Dkohxzi Aocnz Iqshsl

Condition: new, Year of construction: 2025, crosscut and mitre circular saw with maximum cutting height of 170 mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 65° horizontal readjustable fixed stops lower saw blade protection connectable to suction unit Modell-----Motor-----Drehzahl-----Schnittlaenge ZS 170: 400 V / 2,0 KW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Horizontal mitre range ZS 170 ----- 170 mm----- 45 degrees -90 degrees Modell----- Saegeblatt-----Absaugstutzen-----Gewicht ZS 170 -----420 mm----- 100 mm ----- 120 kg Accessories on request: Dehecnz N Hjxzi Ahjkl Roller conveyor / length gantries type RO, RL, RLK, RLH and RLHK for machining aluminium and PVC profiles and for wood profile board machining. the modular roller conveyor system can be supplied as: 3 m type RO: infeed roller conveyor with min. 2 support feet 3 m type RLK: roller conveyor length stop with backwards folding stop slide - machine stand - Main switch lockable - Feed roller conveyor Ro-St60 3 meter right side - roller conveyor RLK-ST60 L 3,0 meter measuring length Length stop/roller conveyor heavy version mm - scale at the rear beam, caliper gauge with magnifying glass and stop flap - Saw blade 420 x 3,5 x 40 Z 84 Neg Location: ex stock 54634 Bitburg - free on truck - - immediately available- Location: Ex stock 54634 Bitburg - free on truck - - immediately available-

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Dohxzjcqvhwji Ahokl Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: From stock 54634 Bitburg - available immediately -

Year of construction: 2024, Condition: new, Magnetic separator for spool transport line Pipe magnet with 4 magnetic plates ( permanent magnet ) Dshxzi Ascqvhxehskl Hinged door for easy removal of the metal parts Tube diameter: 180 mm Available immediately Location: From stock 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition piece - new Sold at a special price Dehxzi Ajcdrzdehjkl Technical data 300-P intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: ex stock Bitburg Subject to prior sale

Year of construction: 1988, Condition: used, machine/vehicle number: 01910/88, Floor grinding machine Eugen Laegler Type: Vibrafor Engine power: 1,1 KW Volt: 220 Grinding surface vibrating Dehxzi Ascb Au Sehjkl Dust bag Location: 54634 Bitburg - can be visited

Condition: excellent (used), Year of construction: 2018, Weima shredder WLK 800/37 kW Year 2018 Technical specification: Hopper clearance: 800 x 1,450 mm Cutting chamber dimensions: 720 x 700 mm Hopper capacity: approx. 0.8 m3 Working width of the rotor: 800 mm Rotor diameter: 260 mm Pusher path with segment floor: 700 mm Drive power: 37 kW Rotor speed: 100 rpm Number of blades (2-row): 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 40 mm with secondary crusher bars Paint finish: Weima standard RAL 2002 / 7016 Connected load: 400 V +/- 5 % / 50 Hz including: V-rotor with knife pockets milled into the profile Two rows of blades on V-rotor Welded blade carriers and screwed blades with countersunk blade screws Super Cut (adjustable counter blade) for regulating the cutting gap Reversible counter blade K-bearing, offset, closed, low-maintenance self-aligning ball bearings Fast hydraulics for pusher backwards with various adjustment options Shock valve sits directly on the slider cylinder Slide chamber unpainted Switch cabinet (Rittal) with 5 m cable SPS control / Siemens Cardanically suspended pusher cylinder with load-dependent controlled drawer Machine frame on rubber suspension elements Segmented floor on 2 sides Safety package Gear limit switch and reversing counter Electromechanical drive with Weima WAP gearbox Manually swiveling screen basket Quick access screen (door) Gearbox oil cooling prepared Hydraulics fast forward Heavy duty" feed hopper Hydraulic oil preheating Hydraulic oil cooling Plug for conveyor belt + electrical integration Conveyor belt cut-out 600 mm Imro Maschinenbau Used discharge conveyor belt with 1.1 kW Type: 500 x 1200 / 4900 Djhxzi Ast Ix Iyshskl Year 2015 Machine number: 510-2770 Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2022, Kaeser screw compressor SM 13 - 11 bar exhibition piece at a special price Volume flow at 11.0 bar (g) 1.07 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 9.63 kW Specific power 9.00 kW/(m³/min) Maximum overpressure 11.0 bar Drive motor efficiency at full load 91.7% Drive motor efficiency class IE4 Nominal drive motor power 7.5 kW Drive motor speed 2955 rpm Drive motor protection class IP 55 Electrical supply 400 V / 3 Ph / 50 Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 8 K Sound pressure level 65 dB(A Dkehxzisvk R A Se Ahjl Compressed air connection G 3/4 Location: From stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Dkshxzi Asvk Scgshjl Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -