Second-hand machinery for sale (39)

Condition: good (used), Year of construction: 1981, 1 x motorized reel Turner RX 3 A Year of manufacture: 1981 Djbu U Dsvl S Tzjlrekl in very good condition. The machine can be viewed with power on.

Condition: excellent (used), Year of construction: 1980, 1 x Precision Lathe PM 1-FZ Year of manufacture: approx. 1980 . Equipment: - Hand-lever cross slide with Multifix AA quick-change system - Electric tailstock for drilling and tapping - Collet clamping with draw-back collets Technical specifications: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Center width: 160 mm - Largest swing over bed: 220 mm Accessories: 1 x Draw-back collet 359 E K 23 Dkjbeqyfpmou U Dlrol 1 x Draw-back collet in tailstock 319 E K 12 1 x Drill chuck in tailstock 1 x Multifix AA quick-change tool holder with 1 cassette Operating manual (copy) Further accessories, such as collets, also with intermediate sizes, are in stock. Machine can be inspected under power.

Condition: good (used), 1 x Immersion washing machine Moc KL 60 S Year of construction: 1989 Dkobjrzt E Dsu U Dlrsl holder 610 x 440 mm with trigger

Condition: good (used), 1 x feed pot Horn with vibrating hopper. infinitely variable. Diameter: 370 mm Dksbu U Deq E Iwujlrsl The machine can be inspected under power.

Condition: good (used), 1 x thread rolling machine Thommen G 07 / PR - 07 Dsbevwdb Ueu U Dlrekl Technical data: Pressure capacity: 7 tons Diameter: 1.2 - 22 mm Max. width in plunge-cut mode: 55 mm Roll diameter: 65 - 95 mm Shaft mount: 28 mm The machine can be viewed under power by appointment.

Condition: good (used), Year of construction: 1990, 1 x Loading Magazine Iemca TAL 65/32 Auto Dobuergatbs U Dlrskl Year of Manufacture: 1990 Bar Machining Diameter: 5 - 65 mm Bar Length: 3200 mm Built-in Channel: 42 mm Formerly attached to a Traub TNS CNC Lathe Extensive range of accessories: Including 2 x complete 66 mm channels 1 x complete 54 mm channel 1 x complete 20 mm channel Plus additional channel pieces in various sizes Collets/washers for channels/sliders, etc. (see photos) The loading magazine can be inspected at our warehouse in Reichenbach at any time.

Condition: good (used), 1 x pillar drill Solid Debuoma Auie U Dlrokl Type: SB 18 Technical data: Drilling diameter max. 18 mm Spindle holder: MK 3 Spindle speed: 180 - 1,780 rpm Table surface: 270 x 300 mm Accessories: 1 x Röhm drill chuck 2 - 16 mm 1 x drive-out wedge The machine can be inspected under power at any time.

Condition: excellent (used), Year of construction: 2008, 1 x automatic lathe Traub TD 16 Year of manufacture: completely overhauled and rebuilt in 2008. with hydraulic single-bar feed LNS Hydrobar 3.16 -HS 4.4 Year of construction: 1993 Very rare machine in absolute top condition. (Only plastic has been worked on) Equipment: 6-fold star turret Quick material clamping. Djbji An R Aju U Dlrskl infinitely variable speed + feed via servo motors (conversion by Wachtler) Long turning device Central lubrication Vogel Accessories: see photos The machine can be inspected under power or a video can be sent.

Condition: good (used), 1 x Drilling - tapping machine Wörner BG 16 with pneumatic feed (drilling by hand also possible) Coolant device Technical data: spindle speeds : 95 - 3.500 rpm (24 steps via pulley 2 via motor) mounting: MK 2 Drilling capacity in steel: 16 mm Threading in steel: M 8 The machine can be inspected under power. Dksbjipyiwou U Dlrol

Condition: good (used), Year of construction: 1996, 1 x automatic lathe MAS A 40 CA Year of construction: 1996 Dkjbu U Dljtpn Thsrjl The machine can be inspected under power.

Condition: good (used), Year of construction: 2007, 1 x loading magazine LNS Sprint 555 Year of manufacture: 2007 Bar processing D: 5 - 55 mm Dkjbu U Devt N Dyelrsl Bar length: 3,200 mm Previously attached to a Goodway CNC lathe. The loading magazine can be viewed at any time at our warehouse in Reichenbach

Condition: good (used), Year of construction: 1999, 2 x hydraulic press Raster Zeulenroda Debujvtrl Ho U Dlrjkl 1 x PYE 100 S/1-M Year of manufacture: 1999 1 x PYE 63 S/1-M Year of manufacture: 1990 Machines can be viewed under power.

Condition: good (used), 1 x vertical band sawing machine Mössner Rekord SM 420 (Type A) year of construction: 1971 with Ideal band welder and grinding device Technical data: throat depth: 410 mm Dksbu U Dsrurgzslrel max workpiece height: 300 mm Table size: 600 x 600 mm (can be tilted) Cutting speeds: 12 - 375 m/min Saw blade length: 3,150 - 3,260 mm Saw blade width: 3 - 12 mm The machine can be inspected under power at our warehouse.

Condition: good (used), Year of construction: 1997, 1 x CNC Swiss-Type Lathe Star SH 12 Year of Manufacture: 1997 Dkobju Rb Ntou U Dlrel Control: Fanuc 21-T with Loading Magazine Iemca MINI Boss 325 CNC The machine can be inspected by appointment, or a video can be sent.