Second-hand machinery for sale (49)

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. Dkobvcowgbw Rjr Tiol 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: excellent (used), Year of construction: 2001, Stehle HK3 720S (automatic straight knife grinder). Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification: • Maximum tool width 720 mm !!! • Tool diameter planer heads (min-max knife heads) 120 - 340 mm • Grinding wheel spindle speed 2850 rpm • Grinding wheel drive 1,1 kW • Clearance angle 10 - 35° • Coolant tank 28 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Dkebvcjv T Rkhor Tiol Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: good (used), WACO BKW resaw + Weinig Hydromat planing line + 2x Fischer SFV800H with handling and packing equipment. Weinig pack infeed chains. Weinig tilt hoist with stick collector Djbowaaqpsvcr Tiskl Weinig chain cross feed system feeding to belt conveyor before resaw. Weinig single Belt Panel Conveyor. Waco BKW-Twin resaw (2x 45kW) renovated Weinig resaw Accelerator Weinig turning and separating station after resaw Weinig chain cross feed with flat separator Weinig multi crosscut saw with 3x trimmer saws Weinig cross transfer system after multi crosscut saw with sweeper system to belt conveyor. Weinig EM15 4x feed roller moulder infeed accelerator before moulder Weinig Hydromat 23 moulder (9 spindle) Weinig belt conveyor outfeed after moulder feeding to 2x inline preparation lines. Tallybeam reader system. 2x Weinig bundler Units/Conveyors. 2x Mosca SoniXs-MP-6 T Strapping Machines, 2x Fischer SFV800 shrink wrappers (movable with side mounted bypass belt conveyor for when shrink wrapper is not needed) 2x Weinig outfeed conveyors after shrink wrappers Weinig v-belt cross feeder feeding to flat belt cross feeders Weinig layer stacker system (2x Weinig Unistack 400 automatic stackers) with stick magazines Automatic top sheet foil dispenser for pack covering. Weinig automatic pack pneumatic pressure system to squeeze packs Mosca KOF-611 automatic pack strapping machine. Weinig roller conveyors feeding to mini pack stacker system. Weinig chain cnveyors to dispatch. Siemens Simatic Driven PLC. Available immediately.

Condition: good (used), WACO BKW resaw + Weinig Hydromat planing line + 2x Fischer SFV800H with handling and packing equipment. Weinig pack infeed chains. Weinig tilt hoist with stick collector Weinig chain cross feed system feeding to belt conveyor before resaw. Weinig single Belt Panel Conveyor. Waco BKW-Twin resaw (2x 45kW) renovated Weinig resaw Accelerator Weinig turning and separating station after resaw Weinig chain cross feed with flat separator Weinig multi crosscut saw with 3x trimmer saws Weinig cross transfer system after multi crosscut saw with sweeper system to belt conveyor. Weinig EM15 4x feed roller moulder infeed accelerator before moulder Weinig Hydromat 23 moulder (9 spindle) Weinig belt conveyor outfeed after moulder feeding to 2x inline preparation lines. Tallybeam reader system. 2x Weinig bundler Units/Conveyors. Dsbvswaaq Nocr Tijkl 2x Mosca SoniXs-MP-6 T Strapping Machines, 2x Fischer SFV800 shrink wrappers (movable with side mounted bypass belt conveyor for when shrink wrapper is not needed) 2x Weinig outfeed conveyors after shrink wrappers Weinig v-belt cross feeder feeding to flat belt cross feeders Weinig layer stacker system (2x Weinig Unistack 400 automatic stackers) with stick magazines Automatic top sheet foil dispenser for pack covering. Weinig automatic pack pneumatic pressure system to squeeze packs Mosca KOF-611 automatic pack strapping machine. Weinig roller conveyors feeding to mini pack stacker system. Weinig chain cnveyors to dispatch. Siemens Simatic Driven PLC. Available immediately.

Condition: excellent (used), Year of construction: 2004, E1/L moulder infeed with 5.5kW hydraulic unit (80 m/min). Max length 6m. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow correct operation of the infeed. A1 moulder outfeed. Automatic deposit on a belt conveyor and cross infeed. Manual destacking Approx. floor space requirement: length 8m, width 2,5m . Suitable for max 80m/min feed speed. Dkobvcou I T U Nor Tiol

Condition: excellent (used), Weinig Unistacker Paternoster stacker with additional handling equipment Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! 1. Weinig moulder outfeed conveyor belt. 2. Weinig roller conveyor with kickers. 3. Weinig (5 belt) sorting station feeding to paternoster stacker. 4. Weinig 811 Unistack Paternoster stacker with 3x stick magazines. Djbvcrovv Ehyo Tijkl 5. Weinig 802 scissors lift roller conveyor feeding to pack outfeed. 6. Weinig 812 powered roller conveyor outfeed. 7. Pack strapping machine. 8. Weinig chain pack outfeed conveyor 9. Safety fences included. Possible to offer installation service if needed.

Condition: excellent (used), Feed speed 10-80 m/min (10-120m/min) Automatic center splitting. Automatic center splitting Saw motors 2 x 45kW Maximum cutting height 300 mm Dkobjv Rx Txjvcr Tiol Saw blade speed 36 m/sec Saw wheel diameter 1,250 mm Saw wheel width 150 mm Saw motor power 2 x 45 kW

Condition: reconditioned (used), Leadermac Thundermac 923T Spindles: 9 x 50mm x 6000 rpm Bottom (22 kW) - Right (15 kW) - Left (15 kW) - Right (15 kW) - Left (15 kW) - Top (22 kW) - Bottom (22 kW), Top (22 kW) - Dkjbvcr Tovtl Alsiol Bottom (22 kW). Working width: 250 mm, height: 160 mm. Max feed speed 100m/min (Possible to increase to 150m/min) Straight jointers. Profile jointers. Connection: 380 V / / 50 Hz 400 amps. Full Documentation included.

Condition: good (used), Weing Rondamat 912 Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Tool sharpening machine for fully-automatic straight knives. Specifications: • Max. working width: 260 mm (possible to offer wider version also if needed) • Min. tool diameter: 80 mm • Max. tool diameter: 280 mm • Automatic indexing: Z 1 to Z 36 • Adjustable clearance angle, radial: 15 – 35 degrees Dkobvcercbxfsr Tiol • Adjustable clearance angle, axial: 0 - 15 degrees • Grinding wheel bore: 20 mm • Grinding wheel diameter: 125 mm/150 mm • Grinding wheel speed: 4600 rpm • Automatic grinding wheel adjustment • No. of grinding cycles: 01-09 • Max. grinding speed, step-lees adjustable to max. 530 mm/min • Total power: 2 kW • Grinding arbor diameter: 50 mm • Grinding wheel adaptor 1 • Coolant tank with pump Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Dkobjv Uwmxjvcr Tijl Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor Automatic lubrication system. Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed

Condition: excellent (used), Year of construction: 2003, E1/L moulder infeed with 5.5kW hydraulic unit. Max length 6m. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and then pushes the workpiece under the feed rollers of the planer. Continuous feeding for short boards. Stop / start for longer material with selector switch. The first feed roller of the planer needs to be freewheeling roller to allow correct operation of the infeed. A1 moulder outfeed. Automatic deposit on a belt conveyor and cross infeed. Manual destacking Djbvcrowgbtxj Tiokl Approx. floor space requirement: length 8m, width 2,5m . Price new €120,000

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Dkobowgbxbjvcr Tisl Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor Automatic lubrication system. Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed

Condition: good (used), Weinig Hydromat H23 50mm spindles 6,000 RPM Bottom 15kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Top 15kw jointer ready Bottom 11 kw jointer ready (straight jointer) + outboard bearing Top 11kw jointer ready (straight jointer) + outboard bearing Bottom 15 kw jointer ready Possible to add additional straight / profile jointers as needed !!! 15kW feed motor. Automatic lubrication system. Dksbvjwgwkyjcr Tiol Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: good (used), Feed speed 10-80 m/min Dksbvowdn Tgscr Tiol Saw wheel diameter 1050 mm Bandsaw width 130mm Saw motor power 2 x 37 kW Hydraulic feed with centering. Saw blade lubrication tank 2 x 6l Voltage 400 volts 50 Hz Weight approx. 10,000 kg

Condition: excellent (used), Year of construction: 2007, Weinig Hydromat H2000 50mm spindles 6,000 RPM Bottom 18,5 kW Right 15 kW Left 15 kW Top 22 kW Top 22 kW Bottom 15 kW 11kW feed motor 40m/min. Automatic lubrication system. Heavy duty sound enclosure Dsbevladbovcr Tiokl Possible to supply with automatic infeed and outfeed if needed.

Condition: excellent (used), BF-36CT-ET S 5,0L Blower Filter. 80m2 filter area. 36 bags 5m long. Top venting version. Left side inlet. Power Pulse version with Bottom scraper version with 0.55kW motor. D = 1500mm H = 7500mm Weight = 1308 kg 18,5 kW 1440 rpm main extraction fan 15 kW 2880 rpm transport fan Control panel and documentation. Dsbvcrsv A Hzzs Tijkl

Condition: excellent (used), Stehle S820 (automatic straight knife grinder). Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification: • Maximum tool width 330 mm • Tool diameter planer heads (min-max knife heads) 120 - 230 mm • Grinding wheel speed 2850 / 5750 rpm • Possible to grind from 2 to 12 knives per head with index plate • Index plates included for 4,6,8,10 and 12 knife grinding. • Grinding wheel drive 1,3 kW • Clearance angle 10 - 35° • Coolant tank 125 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Dkjbvcr Teq Dzkujiol Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: new, Year of construction: 2023, IF-100 moulder infeed (100 m/min). Max length 6m. The flat chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow correct operation of the infeed. OF-100 moulder outfeed. Automatic deposit on a belt conveyor and cross infeed. Manual destacking Approx. floor space requirement: length 8m, width 2,5m . Suitable for max 100m/min feed speed. Djbvcr Tovrtlleijkl

Condition: excellent (used), Year of construction: 1999, Weinig Unimat 23 6x Spindles 40mm 8000 RPM Width 20-230mm Height 10-140mm No 1 7.5 kW (7100 RPM) No 2 and 3. 11kW - Right + Left shared No 4. 11kW - Top No 5 . 11kW - Top No 6 . 7.5kW - Bottom 4.5kw. feed motor. 7x top feed rollers 4x bed rollers Full sound enclosure. Short infeed table, Dkebsvrtlxevcr Tijl Manuals & hand tools. Possible to supply with tooling also if needed.

Condition: excellent (used), Year of construction: 2012, Weinig E3 infeed and A3 outfeed E3 Infeed Scissors lift before crossfeed. Crossfeed table to infeed accelerator. Dobsv R Utnovcr Tiskl Moulder infeed accelerator. A3 Outfeed Drop leaf. Crossfeed belt conveyor. Scissors lift with pack chains. pack outfeed chains.

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing Dsbvcr Tsv Stavoiskl 11kW feed motor Automatic lubrication system. Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed

Condition: excellent (used), Year of construction: 2010, Weinig Powermat 500 (6 spindle + Universal) CNC position adjustment. 4798 work hours Machine number 114015 (2010) 160mm x 230mm. All 7 spindles Powerlock, 8,000 RPM Bottom 7.5 kW Right 11 kW Left 11 kW Top 15 kW Top 15 kW Bottom 7.5 kW Dkjbvcov Uwmror Tisl Universal 7.5 kW 5,2kW feed motor 30m/min feed speed. 2m infeeed table. CNC positioning on spindles 2,3, 4, 5, and 7. 3 way CNC positioning on the universal spindle. Powercom Plus. Possible to supply with automatic infeed and outfeed if needed. Possible to supply with complete handling solution with stacker if needed.

Condition: good (used), 6 Head Multi-head Horizontal Bandsaw Saw pulley diameter: 915mm Sawblade width (max): 100mm Standard saw speed 35m/s Timber width Max: 305mm – 450mm Dsbvcswgkpver Tiokl Maximum opening saw to chain bed: 305mm Feed chains to saw lines 292mm Main motor:6x 18.5kw Feed speeds (variable): 15 – 60m/min std, 7.5 – 30m/min (optional) Type of feed: internal overhead feed system with driven chains synchronised with chain bed Operators control station including speed control and start stop controls Working height 800mm

Condition: good (used), Year of construction: 2003, Weinig Powermat (Unimat) 2000 Speed All Powerlock spindles Bottom 15kW 8,000 RPM Right 15kW 4,000 to 12,000 RPM with inverter Left 15kW 4,000 to 12,000 RPM with inverter Top 22kW 8,000 RPM Top 22kW 4,000 to 12,000 RPM with inverter Dkobvcewihmwor Tijl Bottom 15 kW 4,000 to 12,000 RPM with inverter 11kW feed motor. Feed speed 40m/min Automatic lubrication system. Separate control panel Full documentation Possible to supply with automatic infeed and outfeed if needed.