Second-hand machinery for sale (29)

Condition: new, Year of construction: 2025, machine/vehicle number: 10027619, Piston compressor with intake capacity of 620 l/min, filling capacity at 6 bar approx. 520 l/min, maximum pressure of 10 bar, tank capacity of 270 l, 2 cylinders with 2 stages, speed of 920 rpm, motor 400 volts, 50 Hz, 4 kW with Condor pressure switch and pressure gauge, incl. pre-filter, refrigeration dryer (230 volts), automatic boiler drainer (230 V), Ledpfx Afowgcb Dezorg and oil/water separator, bolted on a safety pallet with rubber vibration mounts, available for immediate delivery from our Seevetal location, excluding transport, subject to prior sale.

Condition: new, machine/vehicle number: 691340002, hoku 119-90 – 2-stage compression mobile piston compressor The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling Lodpfxsvl Ev Ae Afzjrg thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 674 l/min., filling capacity 505 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/2, speed 920 min-1 , Engine power 4 kW / 400 V from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: new, Year of construction: 2024, machine/vehicle number: 6913390001, hoku 113-90 – Solid tradesman compressors with V-belt drive and 2-cylinder high-performance unit made of gray cast iron The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low Lrsdpfsvl Euxsx Afzsg boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 500 l/min., filling capacity 375 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/1, speed 1,300 min-1, engine power 3 kW / 400 V from the Seevetal location, without transport, as seen, subject to prior sale.

Year of construction: 1994, condition: good (used), Working area approx. 2-080 x 1,430 mm, lateral baffles right and left, Filter area approx. 1,800 x 1,300 mm, 2 rows of paper volume filters approx. 650 x 1,800 mm inside fine filter G4 approx. 1.350 x 2.000 mm, air capacity 4.500 m³/h, pressure max. 500 Pa, motor 1,1 kW / 1.400 rpm. Lodpfxjpvil Tj Afzorg

Year of construction: 1991, condition: ready for operation (used), machine/vehicle number: 291, Splashboard 2,000 x 1,500 mm, baffle doors right and left 430 mm each, motor 3.6 kW, 400 volt, 50 Hz, 1,440 rpm, air capacity 7.200 m³/h without on/off switch, pipe connection D = 400 mm with throttle valve, outer dimensions with doors L x W x H: Lodpfx Afshnc Hrozsrg 2850 x 900 x 2350 mm immediately ex stock Seevetal as viewed, without transport and assembly, subject to prior sale

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, drilling width 240 mm, drilling depth 150 mm, max. travel 230 mm, drill head height adjustment 160 mm, drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, speed 3,000 rpm, motor 2.2 kW, 400 volts, 50 Hz., Lrsdpfxevl Eynj Afzjg weight approx. 345 kg, from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: new, Year of construction: 2024, machine/vehicle number: 2209, height adjustment type: mechanical, --- the 'new' own brand of: HoKuTech GmbH & Co. KG --- Slot Mortising Machine VD 20 R Motor 1.5/1.9 kW, Lateral travel in Y-axis 250 mm, Longitudinal travel in X 340 mm, Lrsdpfjrxcylox Afzeg Vertical travel in Z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel boring device with divisions 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, Table rotatable +/- 45°, Weight approx. 345 kg available immediately from stock Seevetal, subject to prior sale,

Year of construction: 2023, condition: new, machine/vehicle number: 28086221201 (AABM0013), MASTERWOOD CNC machining center type PROJECT TF 100 2.0 "PARTNERSHIP EDITION" - MAST0337 Technical data: Axes: X axis: Max. Workpiece length: unlimited Min. workpiece length: 250mm Traversing speed: 0-25 m/min. Y-axis: Max. Workpiece width: 1.000mm for all aggregates Min. workpiece width: 85mm Traverse speed: 0-50 m/min. Z-axis: Max. Workpiece thickness: 60mm Min. workpiece thickness: 10mm Traverse speed: 0-20 m/min. Aggregates: 16 drilling head: vertical spindles in X-direction: 5 pcs. vertical spindles in Y-direction: 5 pieces horizontal double drilling spindle in X-direction: 2+2 pieces horizontal double drilling spindle in Y-direction: 1+1 pieces distance drilling spindles: 32mm speed of drilling spindles: 4.000 rpm. motor: 1,7 kW grooving saw: in X-direction Speed of rotation: 4.000 rpm. Max. saw blade diameter: 125mm Motor: 1,7 kW (the grooving saw is integrated in the drill head) Control system: Personal computer Operating system: Windows 10 Pro - 64 bit Processor: Intel Hard disk with at least 300 GB of storage space CD-ROM drive Color monitor Video card integrated 2 Ethernet cards Program: MASTERWORK MACHINE VERSION Other data: Required air pressure: 8 bar Air consumption: max. 750 l/min Extraction: Volume: 2,000 m³/h Air speed: 25 - 30 m/sec. Suction nozzle: 1 x 150mm Other equipment features: - Air tables at the working area - Roller table at infeed and outfeed - Sensor for plate measurement - Ball screw and linear guides - Rack and pinion drive - Import of DXF files (operating instructions, switching and pneumatic diagrams are in digital form) "PARTNERSHIP EDITION" consisting of: Milling unit, incl. MASTERWORK software extension Speed: 1.000 to 18.000 rpm. Motor: 4,5 kW with ISO 30 intake Incl. integrated suction control (During drilling only the only the drill head is extracted, for milling only the milling unit is extracted) 6-fold tool changer 3 pieces ISO 30 collet chuck incl. collet chuck Tool equipment, consisting of: HW dowel drill: 5 pieces 5mm - GL 70mm - blind hole drill. 1 piece 5mm - GL 70mm - through hole drill bit 4 pieces 8mm - GL 57,5mm - blind hole drills 2 pieces 10mm - GL 57,5mm - blind hole drills 1 piece 10mm - GL 70mm - blind hole drill bit 1 piece 8mm - GL 70mm - blind hole drill bit 1 piece 15mm - GL 70mm - blind hole drill bit 1 piece 35mm - GL 70mm - blind hole drill bit 1 HW grooving saw blade d=125mm, bore=20mm, width: 4,0mm, Z=35 WSA 1 DIA cutter, right - GL=103mm, NL=43mm, D=18mm, shank: 20x50mm, Z 1+1 1 DIA cutter, left - GL=103mm, NL=43mm, D=18mm, shank: 20x50mm, Z 1+1 1 VHW-WP finishing cutter, right, D=10mm Lrjdpfxeiukvks Afzsg Foldable roller conveyor in the infeed Foldable roller conveyor in the outfeed Automatic central lubrication plus options: Complete package for CLAMEX connectors € 3.500,00, complete door package € 3.500,00, software package PaletteCAD start + CAM connection € 3.000,00, freight, installation, instruction € 3.000,00, immediately available from location Seevetal, subject to prior sale.

Condition: used, Leitz HM - IV 66 window set with faceplate and front door set. Ljdpfx Ashzgy Nefzorg Sold in "as is" condition, tool has not been resharpened, ex location Seevetal, without transport, subject to prior sale,

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6939, Fimal Swing Spindle Moulder TX 160 "Partnership Edition" Fence including parallel adjustment with handwheel and digital readout, Handwheel adjustment with digital readout for front fence jaw, Electric travel swing mechanism for the complete fence, Quick-release lever for locking, Aluminium fence jaws and pressure device, curved fence, Electromotive spindle height adjustment, including digital display and decimal impulse setting, Table insert adjustable to the milling tool diameter (instead of table insert rings), Indicator lights for the selected spindle speed, Electrics and safety devices according to CE standards, Table dimensions: 2,500 x 780 mm, Spindle: diameter = 30 mm, height = 140 mm, Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm, Max. tool size under table: diameter = 320 mm, height = 50 mm, Motor: 7.5 kW / 10 HP, 400 Volt, 50 Hz, Including automatic star-delta switch, Sound level according to EN 27960: 83.9 – 87.3 dB(A), Spindle tilt: -45° to +45°, Electromotive spindle tilt adjustment including electronic readout and decimal impulse setting, "Partnership Edition" complete with: Ledpfxsvlw Ids Afzjrg "L" version with bilateral table extension and pull-out workpiece support with EMERGENCY STOP button, Upper control panel including electronic display, Swiveling mounting plate for feed device, mounted on the vertical column of the upper control panel, Socket for feed device, Forward/reverse rotation in accordance with CE standards, Prepared for installation of AIGNER integral fence jaws, Available ex-location Seevetal, without pre-carriage, freight, or commissioning, As inspected, subject to prior sale.

Condition: used, Year of construction: 1980, machine/vehicle number: 18.742, Table milling machine with rigid milling spindle Lsdpfxjul Sfmj Afzjrg Table size 1,920 x 900 mm, Motor 6/8 kW (8/11 HP), 4 speeds 3,000/6,000/4,500/9,000 rpm, Milling arbor D = 30 mm with Morse taper MK 5, weight approx. 700 kg, ex location Seevetal, Sale in "as is" condition as inspected, without transportation, subject to prior sale

Condition: new, Year of construction: 2025, machine/vehicle number: KK00050613, planer shaft diameter: 120 mm, total length of planing tables: 2,250 mm, chip removal for surfacing (max.): 5 mm, chip removal: 5 mm, planing height: 240 mm, number of planer blades: 4, type of input current: three-phase, overall weight: 695 kg, input frequency: 50 Hz, Equipment: motor brake, Holzkraft surfacer and thickness planer minimax fs 52 TERSA, Planing width 520 mm, planing height 3 - 240 mm, Surfacing table length 2,250 mm, 4-knife TERSA cutterblock, Motor 7 kW (9.5 HP); S6 5 meter connection cable 2.5 mm² with 16 Ah plug, complete with: simultaneously foldable tables, combined extraction hood for surfacer and thicknesser D = 120 mm, Thickness table adjustment via handwheel with integrated readout, star-delta switch, Ledpfx Afexn Suajzorg auxiliary fence, CE and BG - wood dust certified. Order no.: 5503501 Available immediately ex location Seevetal, without transport, subject to prior sale.

Year of construction: 1996, condition: reconditioned (used), machine/vehicle number: 16319, max. machining dimensions 220 x 120 mm (raw wood dimension max. 230 x 130 mm) min. machining dimensions 15 x 6 mm, Ljdpoh Euvmofx Afzerg automatic positioning "Hecht-Posiomat", feed rate 6 - 22 m/min, feed roller pressure 6 bar, spindle diameter D = 40 mm, max. chip removal 10 mm feed table 2.000 mm, feed motor 2,2 kW, height adjustment 0,37 kW, dressing spindle 4 kW, joining spindle 4 kW, left profile spindle 4 kW, thickness spindle 5,5 kW, glazing bead separation, ex location Seevetal, in "as is" condition as viewed, subject to prior sale, without freight and packing

Condition: ready for operation (used), machine/vehicle number: 06G1062, Drive = compressed air, Material/air ratio = 17:1, Material pressure max. 110 bar, Ljdpfx Aoiv Ht Isfzerg Air inlet pressure 1 to 7 bar, Delivery rate per double stroke 60 cm³ with gun type MX with double hose, unused since last service 01/20, condition as inspected, ex stock Seevetal, subject to prior sale

Year of construction: 2021, condition: new, machine/vehicle number: GWH432125, Working width 1,100 mm, sanding belt dimension 1.120 x 2.150 mm, max. working thickness 160 mm, combi sanding unit with calibration roller D = 150 mm, pneumatic sanding shoe with insert control, motor 15 kW ( 20 PS), sanding belt speed 18 m per second, stepless feed carpet 4 - 20 m/min., feed motor 0,55 kW (0,75 HP), electric table positioning with motor 0,24 kW and digital LCD height display, mechanical "ECO GEAR SYSTEM" (oscillation of the abrasive belt), automatic carpet centering, Automatic EMERGENCY table lowering, Check-Control-Panel, Automatic sanding roller stop on the control panel, Sanding grit compensation with 6 positions 2 rollers each in the infeed and outfeed, suction connection D = 160 mm, machine with CE - regulations Lrsdshgmmajpfx Afzjg Dimension approx. L x W x H, 1.650 x 1.800 x 2.025 mm Weight approx. 1.300 kg, (identical in construction as Unitek LC 1120 1N KRT) ex stock Seevetal, subject to prior sale, without transport, assembly and instruction

Condition: ready for operation (used), machine/vehicle number: 89915, Drive = compressed air, Lrsdpeiv Huwefx Afzog Material/air ratio = 16:1, Material pressure max. 90 bar, Air inlet pressure 1 to 6 bar, 4 double strokes for 1 liter of material, with gun type MX with double hose, unused since last service 01/20, condition as seen, ex stock Seevetal, subject to prior sale

Year of construction: 1993, condition: used, machine/vehicle number: 93 - 034, Beam press for gluing blocks, max. pressing dimension 2,240 x 880 mm, motorized height-adjustable counter bearings, 4 pressure beams, can be switched on and off individually, 4 pendulum grids, ex location Seevetal, Lodpfx Aoul Uy Hjfzerg Sold in "as is" condition as viewed, without transportation, subject to prior sale

Year of construction: 2022, condition: new, Motor 2,2 kW (3 HP), Lredpfx Afeffyc Nozeg sanding belt 2280 x 150 mm, swivelling edge sanding unit, motorized belt oscillation, support table at the deflection roller pneumatic belt tensioning table size 700 x 350 mm, working surface 1000 x 150 mm, belt speed 22 m/s, roller diameter 140 / 80 mm, suction nozzle D = 100 mm ex stock Seevetal, subject to prior sale

Year of construction: 1978, condition: used, machine/vehicle number: 1010, Roll diameter 1.000 mm band saw blade length 7.100 mm, max. cutting width 960 mm, max. cutting height 620 mm, motor 5,5 kW, Lrodpfxohzgnze Afzjg table size 1.450 x 1.030 mm, installation dimensions L x W x H: 1,900 x 1,160 x 3,130 mm Sale in "as is" condition, ex location Seevetal, without freight and packing, subject to prior sale

Condition: new, Year of construction: 2024, machine/vehicle number: L24110255, HoKuTech band saw HoKu BS 640 AS with lower and upper "blue Gruber guide" Work table dimensions 600 x 885 x 840 mm, Lrsdpfjvmw Ugsx Afzjg Flywheel D = 640 mm, max. cutting height 400 mm, max. cutting width 620 mm, Inclination of the work table 0° - 20°, Band saw blade length 4,770 - 4,810 mm, Band width 8 - 35 mm, Motor 2.2 kW (3 HP), Extraction nozzle 2 x D = 120 mm Dimensions 1,050 x 720 x 2,180 mm, Weight approx. 300 kg, from the Seevetal location, as viewed, without transport, subject to prior sale

Condition: like new (used), Year of construction: 2023, machine/vehicle number: KK00040333, cutting length (max.): 1,600 mm, cutting width (max.): 700 mm, cutting width at rip fence: 700 mm, cutting height (max.): 100 mm, saw blade diameter: 315 mm, height adjustment type: mechanical, overall weight: 277 kg, power: 4 kW (5.44 HP), Circular saw minimax sc 2 c compact, Cutting length max. 1,600 mm, Saw blade max. D = 315 mm, Cutting height max. 100 mm, (79 mm at 45°), max. cutting width at rip fence 700 mm, Extendable aluminum telescopic angle mitre fence, Motor 4 kW (S6), 400 Volt, 50 Hz, Saw blade speed 3,500 rpm, ex stock Seevetal, without transportation, Ledpfx Ast Epnlefzerg Subject to prior sale,

Year of construction: 2023, condition: new, machine/vehicle number: 23-04-35-001, F 25 version 3 Manual height and tilt adjustment 0 - 46° of the saw blade with digital display. Motor 5,5 kW, 2 speeds 3.600 / 4.200 rpm. Double roller carriage 3200 mm, rip fence incl. fine adjustment and DIGIT X (digital display of the cutting width) Cutting width 1000 mm, Angle miter fence, cutting to length up to 3450 mm, scoring unit Basicwith LED light Saw blade diameter max 315 mm, saw blade projection max 104 mm, Cutting height max 100 mm, at 45° max 70 mm, large suction hood (PSV), incl. option front support roller, immediately available from stock Seevetal, subject to prior sale without transport, assembly and instruction Lredpjf A Ehtsfx Afzjg

Condition: new, Year of construction: 2025, machine/vehicle number: 6972, cutting length (max.): 3,350 mm, cutting width (max.): 1,100 mm, cutting width at rip fence: 1,100 mm, cutting height (max.): 155 mm, saw blade diameter: 450 mm, Equipment: scorer, Table dimensions: 1,030 x 680 mm Sliding carriage dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at rip fence: 1,100 mm Maximum cutting height with 450 mm saw blade: at 90°: 155 mm, at 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP Extraction ports D = 120 + 80 mm Mitre fence extendable to 3,600 mm Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable rip fence adjustment Motors: Main saw: 5.5 kW / 7.5 HP, Scoring unit with motor: 0.55 kW / 0.75 HP Lrodpfx Aowz Nbajfzsg Sliding carriage made of anodized aluminium, including high-precision linear guide made of hardened and ground steel Sliding carriage lockable in any position Saw blade guard with swing-away device Outrigger arm with adjustable mitre fence and length compensation at 10°, 15°, 22.5°, 30°, 45° and 90° Belt change for speed adjustment accessible from above (opening in the saw table) Display for set saw blade speed Electrical system and safety devices in accordance with CE standards As inspected, ex location Seevetal, without pre-freight, freight, or commissioning. Subject to prior sale.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Basic pallet racking consisting of: 2 frames 5,000 mm with base plates, storage width 2,700 mm, 4 storage levels with 6 beams of 2,700 mm each. Expansion possible: 1 x frame 5,000 mm with base plates €150.00 1 x beam 2,700 mm €25.00 1 x beam 1,800 mm €20.00 1 x beam 3,600 mm €30.00 Ljdpfxow S T U Rj Afzsrg 1 x push-through protection 2,700 mm €25.00 1 x push-through protection 3,600 mm €30.00 1 x mesh deck 900 mm for one pallet €35.00 Ex location Seevetal, subject to prior sale No shipping! Collection only.

Year of construction: 1983, condition: used, machine/vehicle number: 508323, 21-spindle, pitch 32 mm tool holder M 10 external thread spindle distance max. 640 mm Gantry passage max. 1056 mm, stop length 2500 mm with 4 swiveling stops drilling unit with motor 2,2 kW drilling head swiveling, drilling from below height adjustment max. 80 mm drilling depth max. 80 mm, ex location Seevetal, as viewed, subject to prior sale Lrsdpfxjdardxs Afzjg