Second-hand machinery for sale (200,000)

Condition: used, maximum load weight: 12,560 kg, overall weight: 16,000 kg, first registration: 01/2016, loading space length: 7,670 mm, loading space width: 2,470 mm, loading space height: 2,675 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2016, Wagon no. G0119454_1- Manufacturer: Krone. * Double-decker device * Simple corner fittings * Contour marking rear * Contour marking side/rear * Load certificate Code-XL * Roll-up door (aluminum) * Keyhole system inside * Side walls with keyhole profile * Forklift accessible * Front wall niche * Fixed support legs * Device for rail loading * Lashing recesses Isdpsyu N Avefx Ab Tjhw * Lashing options Double-decker equipment without double-decker loading beam (available at extra charge!). Delivery time: IMMEDIATELY. Technically ready for use condition without further repair. Substructure with signs of wear, some rust. UVV valid. UVV documents available. scattered paint flaking on components of the swap body. scattered rust on components of the swap body. Deformations/stops on components/see pictures. Dimensions are approximate. Offer subject to prior sale, prices net ex location D-59302 Oelde. Further details on request by phone or e-mail:

Condition: used, maximum load weight: 13,150 kg, overall weight: 16,000 kg, first registration: 01/2008, loading space length: 7,360 mm, loading space width: 2,480 mm, loading space height: 2,690 mm, loading space volume: 49 m³, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2008, Vehicle No. G0111510_1 - Manufacturer: Sommer. * Simple corner fittings * Rear contour marking * Portal door with double rotary bar locks (internal) Ihsdpfx Aboyu N Dmo Tsw * Side sliding curtain * Suitable for forklift drive-through * Fixed support legs Delivery time: AVAILABLE IMMEDIATELY. New tarpaulin. Technically operational condition with no further repairs necessary. Galvanized subframe. Valid UVV safety inspection. Dimensions are approximate. Offer is non-binding, subject to prior sale. Prices are net ex location D-59302 Oelde. Further details upon request by phone or email:

Condition: used, maximum load weight: 13,100 kg, overall weight: 16,000 kg, first registration: 01/2023, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 49 m³, total width: 2,550 mm, total height: 2,975 mm, Year of construction: 2023, Wagon No. CC_W1119457 - Manufacturer: Krone. * Simple corner fittings * Load certificate Code-XL * Portal door with simple rotating rod locks (outside) * Forklift accessible * Telescopic support legs Ijdpfxoyu N E Rs Ab Tshw * Device for rail loading * Partially keyhole system inside Smooth furniture floor. Long-term rental possible. Delivery time: AVAILABLE IMMEDIATELY. Rental in larger quantities possible. Furniture equipment. Ø Signs of use from short-term use / see pictures. Technically operational condition without further repair. Substructure with signs of use. UVV valid. LASI CODE XL!!!. Multiple available!. Dimensions are approximate. Offer is non-binding, intermediate sale reserved, prices net ex location D-59302 Oelde. Further details upon request by phone or email:

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2023, loading space length: 9,395 mm, total width: 2,480 mm, Year of construction: 2023, Equipment: ABS, KRONE 2-axle swap body, type: MAXI AZW 18 eL3B7, built in February 2023 > Offer subject to change and prior sale > Gross vehicle weight 18,000 kg > Technically ready for use with normal signs of wear, as shown in the pictures > Body / chassis: RAL color: 9005 / black > For BDF-7.45 bodies with a parking height of 1,020 to 1,320 mm > Unladen ride height: 1,080 mm > Tires: 4-ply: 445/45 R19.5? Good condition > Axles: BPW > Brake system: EBS 4S/3M > Drawbar: length-adjustable (12 x 50 mm) from 1,800 to 2,400 mm with towing eye / 40 mm > MOT + SP current /- NEW > Air connections: DUOMATIC > Electrical connections: ABS and 1 x 15-pin Ihjdjyu Nxkepfx Ab Tjw > Additional galvanized bumper at the rear > Available immediately and multiple units available > Price ex location, D-59269 Beckum: €14,650.00 net

Condition: used, maximum load weight: 13,320 kg, overall weight: 16,000 kg, first registration: 01/2004, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2004, Vehicle No. G0119633_1 – Manufacturer: Krone. Iodpfxoyu Nxqs Ab Tjhw * Simple corner fittings * Roller shutter door (Aluminum) * Fixed support legs * Equipped for rail transport Storage container, wind and weatherproof, secure locking, floor in good condition, no further repairs needed. Delivery time: IMMEDIATE AVAILABILITY. Subframe shows signs of use, partial rust formation. Some paint flaking on parts of the swap body. Isolated rust formation on parts of the swap body. Deformations/marks on components – see photos. Dimensions are approximate. Offer is subject to prior sale. Prices quoted are net ex location D-59302 Oelde. Further details upon request by phone or email.

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: GST Schneider, Transformer Type 13GST108 -Power: 0.384 kW -Technical data: see photo of the nameplate -Motor protection switch: Telemecanique GV2-RT05 Isdpfx Ajmch Twob Tshw -Number: 2x transformer available -Price: per piece -Dimensions: 360/205/H115 mm -Weight: 12.2 kg/pc.

Condition: good (used), Servo drive, control unit, converter, frequency converter, frequency inverter, drive inverter, compact inverter, drive control unit, control unit Iodpfx Abjyu Hrzj Tshw -Manufacturer: Reis Robotics, servo controller, motor control unit -Type: Drive 4009 AT -Number: 2x servo controllers available -Price: per piece -Dimensions: 315/85/220 mm -Weight: 3.6 kg/pc.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 1,600 kg, lifting height: 4,600 mm, free lift: 1,520 mm, fuel type: electric, mast type: triplex, construction height: 2,108 mm, fork length: 1,150 mm, empty load weight: 1,340 kg, total length: 814 mm, drive type: Elektro, construction width: 820 mm, Pedestrian pallet stacker Load center: 600 mm Fork width: 180 mm Ihjdpfxoyvatbo Ab Tow Fork thickness: 60 mm Mast type: Triplex Transmission: Electromechanical Condition: New device Technical condition: New Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 150Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: In addition to this unit, we offer a wide range of other forklifts and warehouse equipment. All our machines are workshop-inspected and tested according to FEM 4.004. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We are happy to purchase your used equipment, even if you do not buy a vehicle from us. Hire purchase & financing with attractive terms are available on request. We are happy to provide you with expert and comprehensive advice on our vehicles. Impulse control, full free lift, non-marking tires, lithium-ion technology,

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 1,600 kg, lifting height: 4,600 mm, free lift: 1,520 mm, fuel type: electric, mast type: triplex, construction height: 2,108 mm, fork length: 1,150 mm, empty load weight: 1,340 kg, total length: 814 mm, drive type: Elektro, construction width: 820 mm, Pedestrian pallet stacker Load center: 600 mm Fork width: 180 mm Iedpfsyvar Rex Ab Tehw Fork thickness: 60 mm Mast type: Triplex Drive: Electromechanical Condition: New machine Technical condition: New Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 150Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year: 2026 Description: In addition to this unit, we offer a wide range of other forklifts and warehouse equipment. All our machines are workshop-inspected and FEM4.004 certified. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also purchase your used equipment, even if you do not buy a machine from us. Lease-purchase and financing at attractive terms are available upon request. We are happy to provide you with professional and comprehensive advice on our vehicles. Impulse control, full free lift, non-marking tires, lithium-ion technology.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 1,600 kg, lifting height: 5,500 mm, free lift: 1,820 mm, fuel type: electric, mast type: triplex, construction height: 2,408 mm, fork length: 1,150 mm, empty load weight: 1,390 kg, total length: 814 mm, drive type: Elektro, construction width: 820 mm, Pedestrian pallet stacker Load centre: 600 Fork width: 180 mm Ihjdpsyvar Dsfx Ab Tow Fork thickness: 60 mm Mast type: Triplex Drive: Electromechanical Condition: New equipment Technical condition: New Front tyres type: Vulkollan Rear tyres type: Vulkollan Battery voltage: 24V Battery capacity: 150Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: In addition to this unit, we offer a wide range of forklifts and warehouse technology equipment. All our machines are workshop-inspected and FEM 4.004 certified. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We are also interested in buying your used equipment, even if you do not purchase a vehicle from us. Leasing and financing options are available upon request at attractive conditions. We will be happy to provide you with professional and comprehensive advice on our vehicles. Pulse control, full free lift, non-marking tyres, lithium-ion technology,

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 1,600 kg, lifting height: 5,500 mm, free lift: 1,820 mm, fuel type: electric, mast type: triplex, construction height: 2,408 mm, fork length: 1,150 mm, empty load weight: 1,390 kg, total length: 814 mm, drive type: Elektro, construction width: 820 mm, Pedestrian pallet stacker Iedpoyvarwsfx Ab Tehw Load center: 600 mm Fork width: 180 mm Fork thickness: 60 mm Mast type: Triplex Transmission: Electromechanical Condition: New unit Technical condition: New Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 150Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year: 2026 Description: In addition to this unit, we offer a wide range of forklifts and warehouse technology equipment. All our equipment is workshop-inspected and FEM 4.004 checked. Please feel free to contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also purchase your used equipment, even if you do not buy a vehicle from us. Lease-purchase and financing at attractive terms are available on request. We are happy to provide expert and detailed advice on our vehicles. Pulse control, full free lift, non-marking tires, lithium-ion technology,

Condition: new, Year of construction: 2026, functionality: fully functional, Tank container: 20-foot steel box container with integrated 25,700-liter polyethylene tank (wall thickness 1 cm). Suitable only for non-hazardous products (water, oils, alcohol, etc.), not for ADR substances. Temperature resistant down to -40°C. 1. Condition: New, unused, with valid CSC plate 2. Capacity: 25,700 liters 3. Decompression valve 4. Working pressure: 7 bar 5. Spare parts included: decompression valve, outlet valve, manhole cover Ijdpfsyvgp Aex Ab Tehw 6. Custom color included 7. Company logo included 8. Removable tank 9. Available by pre-order 10. Transport: Free and non-binding delivery quote (including unloading if desired) – simply provide your postal code. We look forward to hearing from you! NAUTEXA GmbH

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,140 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,930 mm, mast type: triplex, construction height: 2,800 mm, fork length: 1,200 mm, empty load weight: 8,375 kg, total length: 3,200 mm, construction width: 1,450 mm, Diesel forklift Load center: 600 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Technical condition: normal Front tires type: Superelastic Front tires condition: 60 - 80% Rear tires type: Superelastic Rear tires condition: 60 - 80% Ijdjyvl Irspfx Ab Tohw Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, roof cover, front windscreen, heater, full cabin, full free lift,

Condition: excellent (used), CTS Type: C-40/350 Air-cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional accessories. Options may influence performance data. Technical Specification: - Refrigeration unit: Air-cooled, low-noise, fully hermetic, infinitely variable performance adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load: 150 kg/m² - Shelf: Stainless steel, support surface 620 x 600 mm - Maximum load per shelf: 35 kg - Total load with maximum number of shelves: 100 kg Control: - 32-bit controller - LCD control panel Ihjdpfx Abox Ekupj Tsw - Digital display of setpoint and actual values - Numeric entry of setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test sample control Dimensions: - Test volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber water cooled Temperature range -70°C to + 180°C Temperature deviation temporal ±0,1 to ±0,5 K Temperature deviation in time ±0.5 to ±2.0 K Temperature change rate cooling 7.5 K/min Temperature change rate heating 7.5 K/min Heat compensation +20°C 3000 W Heat compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 450 mm Height 750 mm Outer dimensions: Width 870 mm Depth 1280 mm Height 1575 mm Observation window: Width 300 mm x height 540 mm Test chamber volume 190 litres Rated voltage: 3/N/PE AC, 400 V ±10 %, 50Hz Rated power: 10.5 kW Rated current: 22 A Fuse, on-site: 32 A slow-blow Sound level at 1m distance (free field measurement) < 69dB (A) lateral feed-through 50 cm / 125 cm Cabinet is water cooled Refrigerant: R 404A and R 23 Weight approx. 460 kg Type: VTS 7018-5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. function check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Isdshh H Hijpfx Ab Tehw Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: used, Year of construction: 1996, total height: 3,200 mm, total width: 3,200 mm, total length: 8,000 mm, Empty weight: 26.000 kg Price: On request Bed Milling machine Bed Miller Model: CNC Manufacturer: Anayak Type: FBZ-HV-4000 CNC: Heidenhain Year: 1996 Bed-dimensions: 4500x800mm X-travel: 4000mm Y-travel: 935mm Z-travel: 1000mm Rotatable Fräsekopf Spindle-speed: 3000rpm Spindle-take: ISO 50 Incl. peripherals and documents Dismantled for transport Video available! Machine-dimensions: 8000x3200x3000mm Machine-weight: 26000kg - Year: 1996 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 11676-FBZ - Drive system: CNC - Control system brand: Heidenhain - Number of axes [pcs]: 3 - X-axis travel [mm]: 4000 - Y-axis travel [mm]: 935 - Z-axis travel [mm]: 1000 - Table length [mm]: 4500 - Table width [mm]: 800 - Tool holder: ISO50 Ihedpjwnhnfjfx Ab Tjw - Max. spindle speed [rpm]: 3000 - Transport dimensions: 8000mm x 3200mm x 3200mm (l x w x h) - Transport weight [kg]: 26000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,046 h, load capacity: 2,500 kg, lifting height: 4,890 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,275 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Automatic Condition: Refurbished without warranty Technical condition: Very good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 40 - 60% Battery voltage: 80V Battery capacity: 620Ah Battery year of manufacture: 2018 Description: Price includes new safety inspection (UVV) and new paint finish. The 2018 battery is reconditioned using a power cycler including Kappa test (a new or recently refurbished battery can be supplied for an additional charge), matching charger with connector. We are happy to arrange cost-effective transport for you. Lease-purchase possible! Sideshift, fork positioner, Ihodpfx Aeyvanfob Tsw 3rd valve, 4th valve, rear work light, front work light, heater, road approval (StVZO), full cabin, full free lift, CE certificate, Mini levers,

Condition: excellent (used), Heraeus Vötsch Type: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature change rate (cooling): 6.5 K/min Temperature change rate (heating): 7.5 K/min Heat compensation: 4,500 W Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1,280 mm x Height 1,575 mm Viewing window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Supply-side fuse: 32 A slow-blow Sound level at 1 m distance (free-field measurement): < 63 dB(A) Lateral port: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R452A and R23 Weight: approx. 460 kg Important safety information for buyers: The following procedures are carried out on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, all chambers are subjected to a documented trial run. Condition: used Scope of delivery: (see photos) (Technical data and specifications subject to change and errors!) If you have further questions, we are happy to provide information by phone. Ihsdjyu Rhgopfx Ab Tow

Condition: excellent (used), CTS Type: C-40/350 Ex/l Water-cooled climatic test chamber ATEX Zone 1 The Ex/l designation indicates that this climatic test chamber is suitable for use in potentially explosive environments of Zone 1. This means it is designed for operation in areas where explosive atmospheres may be present. Such equipment is specifically built and tested to ensure safety in these environments. Temperature tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ‡0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: Approx. 3500 W at +20°C Approx. 2000 W at -20°C Climatic tests: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ +3.0 % rH over time The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical specification: Ijdpfx Asygui Sob Tohw Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Insert shelf: Stainless steel, support area 620 x 600 mm Load per shelf max. 35 kg Total load with max. shelf configuration: 100 kg Control: 32-bit controller LCD control panel Digital display of setpoints and actual values Numeric input of setpoints Clear text error messages RS 232 interface Ethernet interface Free switching channels for custom test specimen control Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 715 mm External dimensions: Height 1900 mm × Width 1000 mm × Depth 2300 mm Operating data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Rated power: 7.15 kW Rated current: 14.3 A Protection class: IP 54 Sound pressure level:

Year of construction: 2017, condition: used, Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision for standard and special solutions. Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703, Freely programmable length positioning, Siemens Simatic HMI control system, Prepared for connection to a central coolant system. Weight approx: 1700 kg Dimensions W x D x H: 1900 x 1200 x 2400 mm Iedpfjv Uw U Nsx Ab Tohw Cutting disc diameter: Max. 200 mm Drive power grinding motor: 4,0 kW Workpiece length without loader magazines: 3 - 450 mm Workpiece diameter without loading magazine: 3 - 32 mm Workpiece length with loader magazine: 1-310 mm Workpiece diameter with loading magazine: from 3 - 20 mm

Condition: used, mileage: 164,385 km, Year of construction: 2008, operating hours: 19,184 h, Drivetrain Drive: Wheel Weights Empty weight: 41.000 kg Ihsdpfxsxpdcfs Ab Tew Functional Lifting capacity: 55.000 kg Identification Serial number: 30559558 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 11.29x2.7x3.66 Additional information Please contact PFEIFER GROUP for more information

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Screw material: 1.2379 Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned. Ihodpfxjyc Sfps Ab Tow

Year of construction: 2023, condition: like new (used), functionality: fully functional, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Ihedpfx Abjq R Tkwj Tow Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2.22-00005, used belt puller from the manufacturer Bellaform/Pütz TYPE: A400-40 Year of manufacture: 2013 Contact length: 400 mm Belt width: 40 mm Speed: 386 m/min Ihjdpfx Abouixhzs Tsw fully functional

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3.04-00054, power: 30 kW (40.79 HP), Equipment: type plate available, Used Bellaform extruder Type: BH45-30D Year of manufacture: 2013 With screw dimensions 45 mm - 30 l/d, screw speed approx. 160 rpm With 30 kW water-cooled servo motor, with gearbox Cylinder with 4 heating/cooling zones and water bushing in the feed area Material hopper plus a COLORTRONIC dosing screw for masterbatch A melt pressure sensor Ihjdpouxa Abjfx Ab Tjw Control cabinet integrated into the machine frame, with factory-new PLC and With new touch panel for simple and intuitive operation This extruder has been functionally tested! Dimensions: approx. 195 x 70 x 200 cm (L x W x H with hopper) You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.