Second-hand machinery for sale (200,000)

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm Bjdpfx Asvr Hf Ejnpeww module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in Bedpfsw N S E Aox Anpeww high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Bodpfx Anjxh Rqtjpeww Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Bsdpfx Anoxdfa Uspeww Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: used, Year of construction: 2001, Titan Die Cutter MLF 170 Year: 2001 with chrome-plated and precision-ground cutting bed Complete with safety guards and operator panel Electrical and hydraulic systems Cutting bed with cold and hot working system CE certified Zenari Engineering Feeder / Pile Turner Model: MettilevaFogli MLF 170 (2002) Automatic pile feeding system Hydraulic lifting and transfer system with rollers Adjustable speed and pile height control Max sheet format: 1200 x 1700 mm Max sheet format: 500 x 700 mm Cutting force: suitable for heavy carton and corrugated board Automatic feeder (Zenari MLF 170) Die cutting press (Titan MLF 170) Delivery system with roller track Safety features: full enclosure and operator access controls Bwsdpfx Asyu N R Honpjw Regularly serviced and maintained

Condition: used, Equipment: bathroom, lighting, 8 m office container / shipping container – with WC, storage & complete equipment – immediately available! ----- PRICE: Bwsde Ahniyopfx Anpsw €7,500 negotiable, ex works Dunkerque, France ----- BRIEF & TO THE POINT: ✅ Office, WC & storage in one container ✅ Fully equipped: heating, sink, high-voltage power supply, awning ✅ Immediately available – only 2 units available! ----- DETAILS & HIGHLIGHTS: We offer well-maintained 27FT office containers (8 m length) in very good condition – perfect as office containers, construction site containers, or storage containers. The containers come from the equipment of the French company CARGLASS and are of high-quality construction. All technical components are intact and ready for immediate use. The condition is guaranteed and documented in the invoice. Dimensions: 8m x 2.45m x 3.20m = 7t ----- Equipment overview: ✅ Separate WC with sink ✅ Office area with plenty of natural light ✅ Kitchenette with sink & hot water boiler ✅ Storage room ✅ Heating & air conditioning unit ✅ Electric awning 3x7 m with remote control ✅ High-voltage connection, electrical installation & exterior lighting ✅ Ramp & fire extinguisher ----- Special features: ✅ Practical room layout: office – WC – storage ✅ Original images – condition as shown ✅ Ideal as a construction site office, container office or mobile service point ✅ Technically sound, immediately ready for use ----- DELIVERY & AVAILABILITY: ✅ Delivery within a maximum of 2 weeks ✅ Delivery costs (excluding unloading): on request € ✅ Immediately available: 2 units ex works Dunkerque, France ----- Inquire and reserve now! We will gladly send you further photos, technical drawings and details on request. NAUTEXA GmbH

Condition: used, functionality: fully functional, thread length: 100 mm, overall weight: 4,400 kg, type of input current: AC, metric thread diameter (max.): 8 mm, Equipped with Vibratory Bowl & Helpro Process Monitor Bsdpfx Aszt S Hasnpsww

Condition: used, Year of construction: 1983, functionality: fully functional, Equipped with : Wire Straightener , Bushing Cutoff, PKO 1-3, IFO Transfer, Variable Speed and Separate Tool Lube Bwodpfx Aezt S Tgsnpjw

Condition: excellent (used), Year of construction: 2000, operating hours: 5,000 h, functionality: fully functional, overall weight: 18,000 kg, type of input current: three-phase, input current: 380 A, total width: 3,000 mm, total length: 7,000 mm, total height: 3,500 mm, input frequency: 50 Hz, Stack-type flexographic printer. Bjdpozv D Dcjfx Anpsww

Condition: used, SPECIFICATIONS: Total Heading Load (kN) 700 Maximum Heading Load per Station (kN) 450 Strokes per Minute - Variable Speed 1/min 100/300 Bwedpfez Irinjx Anpjw Cutoff Diameter at 600 N/mm2 12mm (600 N/mm2) Maximum Transfer Diameter 14mm Cutoff Length (min/max) 3mm- 50mm Kickout Stroke - Die (Min/Max) 3mm - 50mm Kickout Stroke - Punch (Min/Max) 12/32mm Maximum Die Diameter 60mm Punch Diameter 50mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Specification: Feed Speed 814m/min Workpiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Edge Material Strip: 0.4-8mm Joint Trimming 2x2.2kw Bwjdpfs Afxulex Anpew Workpiece Pre heating EVA Gluepot Airtec Unit AT15 Edge Magazine Pneumatically Driven pressure Roller End Trim Unit Chamfer/Straight Top & Bottom Trimming Unit with Pneumatic Adjustment Contour Trimming Unit Profile Scraping Unit with Quick Change Heads Glue Joint Scrapers Buffers CE

Condition: used, Used Charles Thompson model CT400 Hastelloy C22 Mobile Agitated Nutsche Filter Dryer Manufacturer: Charles Thompson Limited, UK Model: CT400 Type: Mobile agitated Nutsche filter/dryer Year: 2001 Filter diameter: approx. 400 mm / 15.7 in Filtration area: approx. 0.125 m² / 1.35 ft² Product-contact material: Hastelloy C22 External/jacket: 316L stainless steel Bsdpfx Aezun Hljnpeww Shell design: 3 bar/full vacuum Jacket design: 3 bar/full vacuum Design temperature: -30°C to +100°C ASME: Section VIII Div. 1 (1998) + A99 Empty weight: 570 kg / 1,257 lb Agitator: single-blade, approximately 0.75 kW Agitator lift: hydraulic raise/lower Configuration: jacketed vessel on mobile stainless frame/casters.

Condition: used, Year of construction: 1979, functionality: fully functional, thread length: 77 mm, overall weight: 2,268 kg, workpiece diameter (max.): 8 mm, type of input current: AC, Vibratory Bowl Variable Speed Pulley Bedpfxeztr Nuj Anpeww Used #10 Dies

Condition: used, machine/vehicle number: 008702, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Bjdpfx Anozq Urgspsww Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: used, machine/vehicle number: 008701, Max working length: 2740 mm Max working width: 1240 mm Bjdpfx Anozq Urtepeww Membrane: yes No of positions for the rolls: 2 No of work tables: 1

Condition: new, Year of construction: 2012, functionality: unexamined, machine/vehicle number: Modelo Y15V # de Serie C12070192, screw diameter: 22 mm, displacement volume: 36 cm³, injection pressure: 1,417 bar, injection weight: 44 g, ejector stroke: 200 mm, plate length: 240 mm, plate width: 200 mm, plate height: 40 mm, total length: 1,200 mm, total width: 1,200 mm, total height: 2,400 mm, overall weight: 700 kg, heating capacity: 2 kW (2.72 HP), power: 2.2 kW (2.99 HP), type of input current: AC, input frequency: 60 Hz, input voltage: 220 V, I am selling 3 Guan Ming Y-15 V machines and 1 Y-25V machine, all new from old inventory. They have been stored in their original packaging since they were received from China in 2012 and have never been put into production. There are 3 machines with a capacity of 15 tons and 1 machine with a capacity of 25 tons. The Y-15V machines have a 22 mm screw and a maximum injection capacity of 44 grams. The Y-25V machine has a 30 mm screw and a maximum injection capacity of 103 grams. All 4 machines are located in Tepotzotlán, State of Mexico. They are sold without molds, accessories, or spare parts. Price plus VAT. Loading, crane, maneuvering, insurance, and transportation are the responsibility of the buyer. Bwsdpoz Aby Ujfx Anpsw The machines are sold subject to inspection and testing by the buyer. Payment must be made before the machine(s) are removed.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 120 h, functionality: fully functional, machine/vehicle number: 638 TTR, film width: 1,100 mm, The Slitter Dusenberry is a slitting and rewinding machine manufactured by Dusenbery® Converting Systems. Bwedpfx Ansz Rq Ebspjw

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,934 h, load capacity: 3,000 kg, lifting height: 4,655 mm, free lift: 1,424 mm, fuel type: diesel, mast type: triplex, construction height: 2,191 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Bsdpfo Ah Adxox Anpsww Side shifter, 3rd valve, rear work light, front work light, heater, compliant with German Road Traffic Licensing Regulations (STVZO), full cabin, interior mirror, fabric seat cushion, nitrogen accumulator, BlueSpot (spotlight) at the rear, dust protection, double pedal.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 6,551 h, load capacity: 4,500 kg, lifting height: 3,000 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Standard Bwodpfsy A Ufmjx Anpjw Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Load guard, side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, STVZO compliant, full cabin, air conditioning, interior mirror, exterior mirror, rotating beacon, fabric seat cushion, dust protection, double pedal

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 6,600 h, load capacity: 4,000 kg, lifting height: 3,130 mm, free lift: 1,510 mm, fuel type: diesel, mast type: duplex, construction height: 2,425 mm, empty load weight: 5,920 kg, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Bwedpfx Anj Ah Adqjpjw Front tire type: Superelastic Rear tire type: Superelastic 3rd valve, work light (rear), work light (front), heater, compliant with German Road Traffic Regulations (STVZO), full cabin, air conditioning, interior mirror, exterior mirror, plastic seat cushion, double pedal

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Bwedpfx Anowuzzropsw Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Bwjdewuclxepfx Anpsw Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: good (used), Year of construction: 2016, Experience seamless operation with all movements meticulously controlled by NC technology, ensuring swift and precise cuts every time. Boasting CNC controlled cutting height as standard, this machine provides unmatched versatility and precision in your cutting operations. Tailored for the demands of the roof truss and timber frame industries, this 3-axis CNC upstroke crosscut saw sets the standard for accuracy and reliability with a 700mm saw blade and 7.5hp motor. Whether you're tackling compound angle cutting or executing long scarf cuts, the HMZ-3 delivers flawless results with every cut due to its large cutting height of up to 250mm and capability to handle even the most intricate cutting tasks. An onboard optimisation package is included which allows cutting lists to be test optimised against timber lengths to generate a pre-optimised cutting list. Specification Bwodpe Agnz Nefx Anpew 6000mm infeed capacity Right-to-left feed orientation HM-Z saw unit with 700mm blade and centre-line cutting 4000mm outfeed table Onboard optimisation Outfeed monitor

Condition: used, Used Pontifex approximately 100,000 litre stainless steel vertical storage vessel. Unit has welded dished top and bottom heads. Unit measures approximately 3.4m diameter, 10.0m straight side, 13.0m total height. Unit mounted on (4) legs. Specifications: Bode Afd Nhspfx Anpsww Capacity: 100,000 L Tank Bottom: Dish Vertical/Horizontal: Vertical Legs/Lugs/Skirt/Saddle: Legs

Condition: good (used), Year of construction: 2009, Grote 713 Slicer Bodpfx Ae Ahkqrenpjww Stainless slicer, suitable for meat and cheese, this machine performs a variety of slicing applications, including bulk slicing, stacking and shingling into portions, Up to 90 strokes per min per lane, stainless mesh outfeed, 1Ph