second-hand machinery for sale (45)

Condition: excellent (used), KOF-611 Automatic strapping machine Rurfucvgbl Integration into fully automatic timber production lines possible Bottom mounted sealing unit, either in the centre or at the side Programmable Siemens SPS control with operation button Complete electric control for automatic and semi-automatic operation in the operator panel Strap tension up to 2500 N, strap width up to 15,5 mm

Condition: excellent (used), Year of construction: 2006, WEINIG high performance cleaving splitting saw Unimat 23 EL SP for planing and the production of lamellas Spindles 4x 50mm. 230mm x 120mm Bottom 7.5kW 6000 rpm Right + Left 11kW 6000 rpm Top 11 kW 6000 rpm Saw spindles 2x 50mm Dpf8O2 Right saw spindle 37 kW (4000 to 8000 rpm) Left saw spindle 37 kW (4000 to 8000 rpm) Powered outfeed side rollers after saws. Feed motor 7.5 KW Double recoil safety device CE mark Total power 112 KW Full heavy duty sound enclosure. Possible to supply with an automatic feeding system, infeed and outfeed if needed.

Condition: good (used), Weing Rondamat 912 Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Dphwyn Tool sharpening machine for fully-automatic sharpening of finger jointer tooling and straight knives. Specifications: • Max. working width: 320 mm (Special long arbor version) • Min. tool diameter: 80 mm • Max. tool diameter: 280 mm • Automatic indexing: Z 1 to Z 36 • Adjustable clearance angle, radial: 15 – 35 degrees • Adjustable clearance angle, axial: 0 - 15 degrees • Grinding wheel bore: 20 mm • Grinding wheel diameter: 125 mm/150 mm • Grinding wheel speed: 4600 rpm • Automatic grinding wheel adjustment • No. of grinding cycles: 01-09 • Max. grinding speed, step-lees adjustable to max. 530 mm/min • Total power: 2 kW • Grinding arbor diameter: 50 mm • Grinding wheel adaptor 1 • Coolant tank with pump Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: excellent (used), Weinig Rondamat 936 Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Automatic straight knife grinder. Automatic dividing according to number of knives Automatic linear movement for straight knife grinding Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Grinding spindle speed infinitely variable n = 1500 - 3000 Bfal0Asnzc Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW I28tkwvns Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz

Condition: excellent (used), Year of construction: 1999, Weinig Unimat 23 6x Spindles 40mm 8000 RPM Width 20-230mm Height 10-140mm No 1 7.5 kW (7100 RPM) No 2 and 3. 11kW - Right + Left shared No 4. 11kW - Top No 5 . 11kW - Top No 6 . 7.5kW - Bottom 4.5kw. feed motor. Ciito7M3Po 7x top feed rollers 4x bed rollers Full sound enclosure. Short infeed table, Manuals & hand tools. Possible to supply with tooling also if needed.

Year of construction: 2005, Condition: excellent (used), The Preset P499 PP comes with a 20x 100mm diameter profile projector for easy and fast focusing of your tool. The magnifi cation system makes measuring very simple and fast, while allowing the operator to inspect the outside edges of the tool for defects, such as burrs and indentations. • Memorizes 100 machine origins and 8000 utensils • Prints labels and tool lists • 2 serial outputs Gwf3Rc • Calculates the circle through 3 points • Calculates the straight line through 2 points • 200 mm radius • 400/500 mm height • 0.005 mm resolution • Measures 1000 mm x 630 mm x 900 mm • Weighs 100 kg • 3X arbors included

Condition: good (used), Manual grinding machine for profile grinding. Manual straight knife grinder. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 90 mm / 290 mm Tool width max.: 230 mm Grinding wheel drive: 1,1 kW Grinding spindle speed variable n = 1720, 2000, 2500, 2820 Side relief: 20 degrees right and left. Bdlf0Thrl9I Back relief: 10 - 30 degrees Coolant tank approx. 50 litres Electrical connection approx. 2 kW Operating voltage 380 V / 50 Hz

Year of construction: 2007, Condition: like new (used), SCM SANDYA 5S 1350mm width. Ci28Oaza

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate Bi8Jucckex8 High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Bnlf9Kww8Aa Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome.

Condition: excellent (used), Feed speed 10-80 m/min (10-120m/min) Automatic center splitting. Automatic center splitting Hcwlxols Saw motors 2 x 45kW Maximum cutting height 300 mm Saw blade speed 36 m/sec Saw wheel diameter 1,250 mm Saw wheel width 150 mm Saw motor power 2 x 45 kW

Condition: good (used), Timber Chain Driven Infeed, 4 Loading Forks, Hoist/Tilt. Chain Driven Conveyor to 5 Inline Cross Cut Units. EM814 accelerator. Weinig Hydromat 23. 9 Spindle moulder with 4x side heads. B, R, L, R, L, T, B, T, B 1 B straight jointer 18.5 kW 2 R/V straight jointer 11 kW 3 L/V straight jointer 11 kW 4 R/V profile jointer 11 kW 5 L/V profile jointer 11 kW 6 T straight jointer 30 kW 7 B no jointer 22 kW 8 T profile jointer 30 kW 9 B straight jointer 22 kW Feed motor 22kW 100m/min Outboard bearings on all horizontal spindles Belt Conveyor To Cross Transfer. Quality Inspection Station With Siemens PLC. Bundler Units/Conveyors With Siemens Simatic OP27 PLC. Mosca SoniXs-MP-6 T Strapping Machine. Fischer SFV/800-H Shrink-Foil Packaging Machines With Magelis Control (20040. Bundle Layer Stacker System To Outfeed Rollers with stick magazines. Top Sheet Dispenser, Mosco Pack Bander, Rollers To Pack Stacker, B0Oqvumres Roller Conveyors to Dispatch. Siemens Simatic Driven PLC.

Condition: excellent (used), Fischer SFV 800 H High speed shrink wrapper. Fzin7Rk Tunnel length = 3.5m Board length = min 1000mm Throughput width = max 280mm Throughput heigh = max 180mm Performance (up to 40 µ foil thickness) = 60 m/min Mounted on floor rails for sideways movement option. Side belt conveyor for pass through option when not in use. PLC controlled. Possible to supply with Weinig bundling station, Mosca bundler and labeling and marking also if needed. Possible to supply with additional handling equipment as needed. Possible to supply with a complete planing line with a Weinig moulder and all handling equipment as needed.

Year of construction: 1992, Condition: excellent (used), Weinig Unimat 22EL Mc3Kmmsnqx Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Machine #225 1794 Year 1992 120mm x 220mm Short infeed. Photos of actual moulder and specification shall be confirmed week 38 after arrival. Spindles 6x 40mm. Botttom 7.5kW 6000 rpm Right 7.5kW 6000 rpm Left 7,5 kW 6000 rpm Top 11 kW 6000 rpm Top 7,5 kW 6000 rpm Bottom 7,5 kW 6000 rpm Feed 5.5kW 6-36m/min with inverter 3x driven bed rollers 10x top feed rollers Documentation and tooling included. Possible to supply with automatic infeed and outfeed if needed. Possible to supply sound enclosure if needed.

Year of construction: 2001, Condition: excellent (used), Stehle HK3 720S (automatic straight knife grinder). Dndnqt Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification: • Maximum tool width 720 mm !!! • Tool diameter planer heads (min-max knife heads) 120 - 340 mm • Grinding wheel spindle speed 2850 rpm • Grinding wheel drive 1,1 kW • Clearance angle 10 - 35° • Coolant tank 28 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Year of construction: 2010, Condition: excellent (used), Weinig Powermat 500 Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Dngucz Machine number 114032 (2010) 160mm x 230mm. 1st bottom spindle 40mm. 5 spindles Powerlock. Powerlock spindles 8,000 RPM Bottom 11 kW (40mm) Right 11 kW Powerlock Left 11 kW Powerlock Top 15 kW Powerlock Top 15 kw Powerlock Bottom 11 kw Powerlock 7.5kW feed motor 2m infeeed table. Automatic lubrication system. Electric digital display memory system. Heavy duty sound enclosure. Possible to supply with Rondamat 960 grinder and Opticontrol if needed. Possible to supply with tooling if needed. Possible to supply with automatic infeed and outfeed if needed. Possible to supply with complete handling solution with stacker if needed.

Condition: good (used), Ceetec IPT250 Touch robust automatic painting machine Tehnical data: Capacity: from 20 m/min. to 180 m/min, Bkrakzmvk9V Workpiece dimensions: 10×10 mm to 250x250mm, Number of brushes: 8, Number of nozzles: 16, Electricity consumption: 16A, Compressed air: Min. 6 bar, Electrical connection: 3x380V + PE + 0.32A, Inlet height: 844 mm (+-50 mm), Weight: 825 kg, Length x width x height: 2400x1100x1475 mm, Direction of throughput: Optional.

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). Bk0Vytwdg0F A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814.

Condition: good (used), Automatic board stacker for use after a moulder, resaw, crosscut, double end tenoner etc. Pack size up to 6,5m x 1,2m x 1,2m high. Bmazizuk0Yq Capable of stacking 10 layers per minute.

Condition: good (used), Feed speed 10-40 m/min Distance: roller fence to sawline 230 mm Distance: feed rollers to sawline 159mm Distance between saws 5mm to 180mm Saw blade dimensions 6050 x 100 x 1.06 mm to max 1,24mm Saw blade speed 35 m/sec Saw wheel diameter 915 mm Saw motor power 2 x 15 kW Behz2Cq Feed motor power 1,1 kW with inverter. Saw blade lubrication tank 2 x 6l Voltage 400 volts 50 Hz Weight approx. 6000 kg

Condition: reconditioned (used), Year of construction: 2007, Leadermac Thundermac 923T Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Spindles: 9 x 50mm x 6000 rpm Bottom (15 kW) - Right (15 kW) - Left (22 kW) - Right (15 kW) - Left (22 kW) - Top (22 kW) - Dpmi39 Bottom (22 kW), Top (22 kW) - Bottom (22 kW). Working width: 230 mm, height: 160 mm. Feed motor 22kW Max feed speed 120m/min Straight jointers on 4 sides. Connection: 380 V / / 50 Hz 400 amps. Full Documentation included.

Condition: good (used), Year of construction: 2007, WACO Hydromat 3000 Gxcytla 50mm spindles 6,000 RPM Bottom 22kW + automatic straight jointer + outboard bearing Top 37,5kW + automatic straight jointer + outboard bearing Right 22kW + automatic straight jointer + profile jointer Left 22kW + automatic straight jointer + profile jointer Top 37kW Straight + automatic straight jointer + profile jointer + outboard bearing Bottom 37 kW Straight + automatic straight jointer + outboard bearing 22kW feed motor 120m/min. 4-roller heavy duty infeed system. Automatic lubrication system. Electric digital display memory system. Possible to supply with full handling equipment if needed.

Year of construction: 2000, Condition: excellent (used), Weinig High-Mech A4 bundling system Bundle forming packaging unit possible to combine with other Weinig outfeed handling systems available from stock such as buffers and stackers. Consisting of Bjm2Drodzwb 1. Weinig 815-300 high speed bundling unit 2. Weinig 812-200 outfeed roller conveyor with crossfeed 3. Control panel with Siemens S7-300 CPU

Year of construction: 2011, Condition: excellent (used), Thomas Pettersson infeed and JP Mackinteknik AB outfeed system (Sweden). Automatic infeed outfeed system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Layer feeder (4 layers per minute) with stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for loading pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. Dnijwn

Year of construction: 2006, Condition: excellent (used), WEINIG high performance cleaving splitting saw Unimat 23 EL SP for planing and the production of lamellas Spindles 4x 50mm. 230mm x 120mm Boo22R0S7 Bottom 7.5kW 6000 rpm Right + Left 11kW 6000 rpm Top 11 kW 6000 rpm Saw spindles 2x 50mm Right saw spindle 37 kW (4000 to 8000 rpm) Left saw spindle 37 kW (4000 to 8000 rpm) Powered outfeed side rollers after saws. Feed motor 7.5 KW Double recoil safety device CE mark Total power 112 KW Full heavy duty sound enclosure. Possible to supply with an automatic feeding system, infeed and outfeed if needed.