Diesel generator

Depco

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle Fodpfxsrz Nfle Agrspb - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: ready for operation (used), fuel type: diesel, nominal power (apparent): 950 kVA, 1000 rpm ore originali serbatoio interno 500lt pronto al lavoro Fpodpfx Agewvbn Iorsb

Condition: used, Year of construction: 2009, IN SUPERSILENCED 20' CTR Power (KVA): 1000 Fpodsxvp Efepfx Agreb Working hours: 10500

Condition: used, Year of construction: 2003, Traverse X-axis: 200 mm Y-axis travel: 350 mm Z-axis travel: 250 mm A-axis speed: 60 rpm Workpiece holder: ISO 50 Workpiece diameter: 3 - 200 mm Workpiece length: Max. 300 mm Workpiece weight: max. 40 kg Connected load: approx. 2kW (230 v / 50 Hz) Fodporxhz Tefx Agrjpb Dimensions W x D x H: 1245 x 1900 x 1470 mm Weight: approx. 2400 kg colour: light gray RAL 7035 Suitable for fully automatic and touch-less measuring of cutting tools of all kinds. By means of 2 CCD matrix cameras, reflected-light and transmitted light measurements are performed. For example diameter, length, angles, spiral angle, spiral length, clearance angle, cutting angle etc. can be measured. Accessories: Pneumatic workpiece clamping, Windows 7 PC + QCM 8.0 software VIALOGIC TIM Teach-In-Mode, software package 1 (cylindrical tools sharp edge, corner and full radius), software package 2 ( conical-spiral tools sharp edge, corner and full radius), Software VIALOGIC Viascan, QCM Network, LightControlDevice, Glass scales on the linear axes.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Hydraulically operated precision plunge grinding machines by Rollomatic. Grinding process: cylindrical plunge grinding, workpiece diameter range: 0.2mm–6.35mm, shank diameter range: 1mm–6.35mm, total workpiece length range: 30mm–60mm, grinding wheel diameter: 200mm, grinding spindle speed: 6,000 rpm, workpiece speed: 800 rpm. Machine dimensions (X/Y/Z): approx. 1100mm/800mm/1300mm, weight: approx. 600kg. Includes spare parts. Documentation available. Fsdpfx Agsw Dfd Njrjpb

Condition: used, Year of construction: 1973, overall weight: 8,000 kg, output current: 192 A, nominal power (apparent): 1,680 kVA, continuous power (apparent): 1,680 kVA, MTU EZ531, Type MB16v652, 1973 + generator ASEA GF 500 M Fodpfovu T Npox Agropb

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Bongard deck oven Orion (electric), type 602/4.160 (approx. 8 m²), year of manufacture end of 2021, has only been used for approx. 3.5 years, incl. loader / loading table (manually height-adjustable, for left and right), 4 decks 120 x 160 cm, each with approx. 18 cm interior height or approx. 23 cm for the top oven, with Bongard "Intuitive" computer control of the current design. Electrical connected load: approx. 52 kW / 100 A 380 / 400 V. Including steam function for excellent baking results. Dimensions: Outside: approx. 188 cm width + 2 x 10 cm for loader (left and right), depth: approx. 265 cm, height: approx. 225 cm + 35 cm for steam fan, total weight: approx. 2.5 tonnes Space under loader in top position: approx. 190 to 215 cm The oven was professionally installed and commissioned by the local authorised dealer at the end of 2021. Sufficient space and a large door opening of approx. 190 x 220 cm are available for dismantling. This can be reached at ground level by van / lorry. Fpjdpexzr Duofx Agrsb The loader and the outer panelling including insulation must be removed during dismantling, the oven core can remain in one piece. In any case, the stove should be carefully dismantled by a specialist and the dismantling should also be documented by labelling, photos, etc., ideally by the person who will later reassemble and commission the oven. This must be organised by the buyer. The original documents, drawings etc. are available. We will be happy to send you technical data sheets and further photos. The new price was over 60,000 EUR net.

Condition: used, Year of construction: 2001, Arrival week 46/2025 Fpodsxvp D Uspfx Agrsb Only 49 working hours Power (KVA): 810 Working hours: 49

Condition: used, Year of construction: 2005, functionality: fully functional, PERFORMANCE AND DESIGN: Pressing Capacity: 26-100 T (adjustable) Maximum Return Force: 45 T Table Dimensions: 1,600 x 1,300 mm Maximum Table Load Capacity: 12,000 kg Distance – Ram to Lower Table (Max.): 1,700 mm Frame Type: 4-column Overall Dimensions approx. (W x D x H): 4,900 x 2,800 x 5,500 mm Total Weight approx.: 17,000 kg T-slots and drillings to DIN 650 – 22 mm HYDRAULIC UNIT: Hydraulic Pump (Brand: REXROTH): SYDFE2x/071R-PPA.. Motor Power: 15 kW Max. Operating Pressure: 200 bar Pressure Accuracy during Pressing Stroke: +/- 5 bar Oil Tank Volume: 475 L Hydraulic Oil Specification: HLP 36 ELECTRICAL SYSTEM ACCESSORIES ELECTRICAL CONNECTION: - Main Supply: 400V AC - Control Voltage: 24V DC - Frequency: 50 Hz Fsdpfx Ajxd Tv Degropb - Hydraulic Main Motor Connection: 15 kW - Total Connected Load approx.: 21 kW FEATURES • 180° foldable ram plate up to 7.5 tons (tilted) • Ram ejector 5.6 tons, 160 mm stroke • Stroke extension by 300 mm • Increased speed DOCUMENTATION • Hydraulic diagram • Electrical diagram • Technical drawing • Data sheet FUNCTIONS AND DESCRIPTIONS CONTROL OF THE PRESS: The press is operated via the operator panel. • Raise/lower the ram plate • Tilt the ram plate • Extend/retract the table • Operate the ejector • Set press force The control system is Siemens Simatic S7-634.

Condition: used, Year of construction: 1997, 340 original hours Power (KVA): 1000 Working hours: 340 Fpjdpfx Aoxrzpzegrob