Electric motor 2.2 kW 1400 rpm

Ecoair AM100LS4

Condition: excellent (used), Swing over bed 1000 mm Distance between centers 2000 mm Rcedpfx Aewhkdcogzjk Center height 500 mm Swing over slide 700 mm Spindle bore 128 mm Spindle speeds 6.4-1'600 rpm SIEMENS 810 D control Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR Rcedpfxeiqkc Ie Agzsk year of manufacture 1982, 2 gear speeds 1400/2800 rpm, table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm Rcodpfx Agocxxx Hjzok stroke:8-100 mm table depth:710 mm table width:500 mm ram head dimension:450x280 mm ram adjustment:63 mm no. of strokes:140 Hub/min total power requirement:7 kW weight of the machine ca.:3,5 t

Condition: used, Electric Motor WWE Rjdpfx Agoc Sqvvozsck American Model !! Type WWE250-18-449T 460 60Hz 250 HP (PS) 1790 RPM 282A IP55

Condition: used, boring: 63 mm M 12x1,5 Rcodpjcn Tb Esfx Agzek M 16x1,5 M 18x1,5 M 20x1,5 M 22x1,5 M 10x1 diameter: 160 mm roll width is different: 60, 70, 80 mm

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: Rexroth/Hydraudyne, hydraulic station with oil cooler / pressure accumulator / filter ... -Type: 03 HDJ -Engine power: 22 kW/1460 rpm -Tank capacity: approx. 240 liters -Pressure display: up to 250 bar -Individual components: pressure accumulator/hydraulic tank/filter/valves see pictures -Number: 2 units available Rjdpfxogz Irvj Agzjck -Price: per piece -Dimensions: 1060/820/H1530 mm -Weight: 738 kg

Condition: good (used), MAHO Milling machine MH400 - holder SK40 - with digital display - Brake motor for work spindles: 2.2 kW - X-axis: 400 mm - Y-axis: 375 mm - Z-axis: 250 mm - Width: 150 cm - Depth: 120 cm - Height: 180 cm Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Rcjdpjum Rnpjfx Agzsk Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: used, Year of construction: 1973, turning diameter over bed 490 mm turning diameter over slide rest 280 mm turning length 2000 mm centre height 245 mm centre distance 2000 mm spindle bore 62 mm total power requirement 7,5 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 3,78 x 1,17 x 1,42 m Accessories: 3-jaw chuck 240 mmø, face plate 400 mmø, MULTIFIX-tool post, Rcsdetqqvvspfx Agzsk solid steady, coolant

Condition: used, Single column eccentric press WEINGARTEN type ERV 40 Machine No. 537 / 65 Year of construction 1965 Compressive force 40 ton. throat 230 mm table size 570 x 470 mm ram surface 250 x 200 mm clamping spigot bore Ø 40 mm installation height max. approx. 520 mm stroke adjustment 8 - 88 mm slide adjustment travel 63 mm Stroke rate 70 strokes per minute Drive power 3 kW Mains connection 380 Volt, 50 Hz - Table height adjustment Rcedpfx Aeffm Hhogzjk - Overload protection by crushing plate - clutch-brake combination by WEINGARTEN friction thread clutch - electric 2-hand operation and foot switch - central lubrication via hand pump space requirement L x W x H 1600 x 1150 x 2300 mm weight approx. 2,6 ton.

Condition: good (used), x-travel 300 mm y-travel 350 mm z-travel 350 mm taper in main spindle ISO 40 table surface area 625 x 380 mm T-slots 8 Stk. turning speeds 40.0 - 2.000 U/min transmission ratio 18 Stk. feed stepless 0 - 500 mm/min quill stroke 60.0 mm distance spindle nose and table min 50 / max 400 mm voltage 400 V total power requirement 5.1 kW weight of the machine ca. 800 kg range L-W-H 1400 x 1100 x 1700 mm from a training workshop (vocational school) Well maintained (!!) Rjdoxl E Stopfx Agzeck Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot angle/clamping table * Swiveling +/- 30 degrees - Axis feed with rapid traverse in X+Z+Y axis * Rapid traverse continuously adjustable - Swiveling machine light - Control cabinet, installed on the left - Coolant device