Electric motor 2.2 kW 1380 rpm

Elektrim SKG90L4PC T

Condition: used, three-phase motor, electric motor -Manufacturer: Elektrim, electric motor type SKG90L4PC T -Power: 1.1 kW -Speed: 1415 rpm Bedpfxou Uwxpo Ag Ijcw -Shaft: Ø 24 x 50 mm -Design: B3 -Dimensions: 310/175/H230 mm -Weight: 15 kg

Condition: new, Screw compressor with refrigeration dryer Belt-driven. Space-saving. Affordable. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and trade businesses. Impressive compressed air quality Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: Infologic² Basic control unit Refrigeration dryer: Attached, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Flow rate at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor power; IP55 7.5 kW Oil volume 3.2 lt Pressure dew point of refrigeration dryer (20°C 100% RH) approx. +3 °C Installation data: Ambient conditions min. / max. 1 / 46 °C ΔT above cooling medium temperature 2 °C Cooling air requirement 756 m³/h Free fan pressure 30 Pa Noise level 68 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight: Length x width x height 1540 x 665 x 1350 mm Weight 240 kg Compressed air outlet G 1/2" female Compressed air tank capacity 270 lt INCLUDES OPTION: Bsdpfx Agewm Ih Ae Ijcw Aftercooler C43 MINI (so that the Condensate accumulation is reduced to a minimum)

Condition: used, Year of construction: 1996, machine/vehicle number: 272 / 9-604, functionality: fully functional, operating hours: 5,000 h, cutting height (max.): 2,200 mm, total width: 5,700 mm, cutting length (max.): 4,300 mm, main saw diameter: 300 mm, The machine is used and in good overall condition. It is fully functional. It has only been used occasionally as needed (not daily) in the advertising technology sector. Cutting length: 4300 mm, cutting height: 2200 mm, motor power: 5.5 kW, equipped with Super Cut scoring unit, saw blade: 300 mm. IMPORTANT: The saw is available for demonstration. The technician who installed the saw can, if required, assist with dismantling for an additional fee. Bcodpfx Agjw I Er Ts Isw

Condition: ready for operation (used), A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible. Bcedpfswftb Sox Ag Iew

Condition: used, Year of construction: 1995, total length: 4,450 mm, total width: 1,530 mm, total height: 2,550 mm, Weight: 740 kg - Year: 1995 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 25607 - Max. cutting height vertical [mm]: 1920 - Max. cutting height horizontal [mm]: 1820 - Max. cutting width [mm]: 3300 - Max. cutting depth [mm]: 80 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 300 Bedewiwlvspfx Ag Iecw - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Power [kW]: 4.8 - Transport dimensions: 4451mm x 1535mm x 2550mm (l x w x h) - Transport weight [kg]: 740kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), three-phase motor, electric motor -Power: 2.2 kW -Speed: 930 rpm -Shaft: Ø 28 mm -Design: B3 -Protection class: IP 44 -Brake: 220 Volt -Quantity: 1 piece available -Dimensions: 470/270/H205 mm Bedpfedfgk Rox Ag Ijcw -Weight: 39 kg

Condition: used, Panel saw Manufacturer: Holz-Her Model: 1265 Year: 1989 Bodpow I A Dysfx Ag Ijcw Technical specifications Working dimensions Cutting dimensions (mm) Length x Height 3300/4300 / 5300 x 1900 4300 / 5300 x 2070 4300 / 5300 x 2200 Trimming height = max. Cutting height - 65 mm Cutting depth (mm): 45 (50) Cutting depth depends on the workpiece Dimensions in brackets without Super Cut Saw unit Motor power: 3 kW, 400 V, 50 Hz Saw blade diameter (mm): 220 Saw blade speed (min) at 50 Hz: 5450 Extraction Air consumption (m/h): 2000 Air speed (m/s): 20 Connection (mm): 160 Machine dimensions Floor area Length (mm): 4315 / 5315 / 6315 Depth (mm): 1420 Height (mm): 2500 / 2640 / 2775 Weight (kg): approx. 760 (5300 x 2200mm) Gross weight (kg): approx. 990 (5300 x 2200 mm)

Condition: good (used), functionality: fully functional, Technical specifications: Manufacturer: Striebig Type: Standard II Plus 6220A Year of manufacture: 5.92 Feed: manual Design: automatically adjustable aluminum slatted frame Saw carriage lock: manual Saw unit plunge-cut: manual Bcjdpfowdig Iex Ag Isw Swivel adjustment from 0 to 90°: manual Motor power: 4.4 kW Cutting area: 5600 × 2200 × 80 mm Speed: 4750 rpm Saw blade diameter: 300 mm Space required: L × H × W 6400 × 2900 × 1600 Condition: good (all ball bearings new, red plastic strips new) Location: Warehouse Installation: Wall-mounted, freestanding A forklift is available for loading. Installation and delivery available upon request.

Condition: used, Year of construction: 2005, machine/vehicle number: 206025, functionality: fully functional, type of input current: three-phase, saw blade diameter: 250 mm, feed length X-axis: 4,600 mm, feed length Y-axis: 2,070 mm, feed length Z-axis: 60 mm, fully functional. Welded frame with exceptionally high rigidity Automatically retractable support grid Secure locking system for the saw carriage (top and bottom) Bjdpfx Aewyld Ieg Iocw Control panel at eye level

Condition: not inspected (used), Year of construction: 1998, machine/vehicle number: 13189, functionality: limited functionality, VERTICAL PANEL SAW WITH ELECTRIC MOVEMENTS & DIGITAL DISPLAYS FOR CUTS Brand: GMC MACCHINE SRL Model Type: KGS 660S Serial No.: 13189 Year: 1998 (Photos taken prior to any potential refurbishment, machine offered as-is) MACHINING CAPACITIES: - Max. horizontal cutting length: 5300 mm - Max. horizontal cutting height: 2100 mm - Max. vertical cutting height: 2200 mm - Max. cutting depth: 80 mm OTHER FEATURES: - Power supply: 380V Three-phase+T - Installed power: 7.5 kW - Main motor power: 4.4 kW (6 hp) - Saw blade speed: 5,200 rpm Pneumatic blade feed - Carbide-tipped saw blade: Ø 300 mm, bore Ø 30 mm - Welded steel frame, PVC slat frame with automatic retraction via pneumatic cylinders - Fully lengthwise pneumatic retractable intermediate support with 2 adjustable and retractable stops - Retractable rollers for panel handling - Pneumatic locking of the saw carriage - 8 bar pneumatic feed - Digital display for cuts - Complete extraction system DPS Back cover spans the entire rear of the machine Lower longitudinal channel for sawdust collection Multiple extraction points in the lower section Extraction port: Ø100 mm - Support for floor-mounted installation - CE Marked Total space required when mounted on supports: 6300 x 1600 x 3040 mm (includes operator and maintenance area) Bcodpfx Aeu R Ulhog Isw Transport dimensions, 2 packages: . 1 frame 6300 x 860 x h.2620 mm . 1 pallet 3150 x 1000 x 1000 mm Total weight: 1250 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Offered as a lot, without refurbishment or warranty. Ex works price, excluding VAT. Transport and services on request.