Portable power station

ELMAG ENERGY 2400

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood Isdpelht H Eefx Aaajtp such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, overall weight: 47,000 kg, axle configuration: 2 axles, Year of construction: 2025, Technical data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Total weight: 47,000 kg Fifth wheel load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3,750 mm Fifth wheel height loaded: 1,200 mm Steering radius to the rear: 2,300 mm Loading area length: 6,850 mm Extendable by: 5,500 mm Loading height with max. load: 350 mm Chassis length: 2,600 mm Loading height of rear chassis with max. load approx: 1,005 mm Suspension travel: -150/+450 mm Axle spacing: 1,360 mm Total width: 2,540 mm Total weight depends on fifth wheel load. Low bed: Low bed with external supports in extendable design "SUPER LOW" design, length approx. 6,850 mm. Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking. The supply lines are protected in the extendable supports and automatically adjust to the respective low bed length. 5 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 6 pairs of threaded blocks on the inner support for mounting screwable RUD rings. Rear chassis: Rear chassis with closed outer frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of tension rings lying in the trough (LC 8,000 daN+5,300 daN). 2 pairs of stake pockets for 100 x 50 mm stakes in the outer frame Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,785 mm. Gooseneck can be raised/lowered hydraulically and removed. Technical fifth wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2 and 6 x 4 PENDEL-AXLE: "PENDEL-AXLE", all axles hydro-mechanically forcedly steered. Hose rupture valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinder with shut-off valves and pins for securing in raised position. Final painting of the axles with 2 layers of 2-component paint in a single color in "FAY-Gray-34-0260". Technical axle load: 12,000 kg Hydraulic axle compensation. Axle tool. Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting cables to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: Steel construction made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Ijdpfxeizu Nwe Aaajtp Paint: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat in a single color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint possible. Tires: Tires 245/70 R 17.5 3PMSF At the manufacturer's discretion. Load index (146/146F) Preparation for screw-on container positioning for 1x 20' or 1x 40' container on the outer supports. Without container locks. i i2" kingpins iA galvanized steel bulkhead, approx. 400 mm high. iA spare wheel with holder in front of the bulkhead. i2 brake shoes with holder on the bulkhead. iYellow-red air couplings on the galvanized connection strip at the front. Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles. (without insta

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Itjdpfx Aasf Epznjaep Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: used, mileage: 18,753 km, power: 145 kW (197.14 HP), fuel type: diesel, gearing type: automatic, first registration: 02/2024, next inspection (TÜV): 02/2027, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Optional extras: Adaptive windscreen wiper system (Magic Vision Control) heated, dashboard in Artico man-made leather, direct current (DC) charging system, double sun visors (extendable, swivel), Driving Assistance package Plus, driving assistance system: trailer maneuvering assistant (Trailer Assist), luggage compartment partition (net), head-up display (front view display), interior trim: Oak wood, Black headlining, Energizing Air Control (Plus) cabin air filter, Acoustic comfort package, Charging cable for public charging points (8.0 m), Front/rear alloy wheels: 10x21 / 11x21 (AMG, 5 twin-spoke, RYA), Metallic paintwork, Multifunction telephony, MBUX Entertainment multimedia system, Night package Iodpovnp Nxefx Aaastp Further equipment: Airbag passenger side can be switched off, Airbag driver/passenger side, Acoustic ambient protection (exterior sound), Interior ambience package, Drive type: all-wheel drive, AC charging system, Equipment package: Advanced, Electr. adjustable and heatable, both, DAB tuner (digital radio reception), AMG Line design and equipment line, 100 kW electric motor (hybrid drive), electronic traction system (ETS), driving assistance system: active brake assist, driving assistance system: active lane departure warning system, driving assistance system: downhill speed regulation, driving assistance system: Speed limit assistant, Driving assistance system: traffic information system Live Traffic, Driving assistance system: traffic sign recognition, Vehicle setup (online services / apps), Vehicle monitoring (vehicle location system), Electric windows front + rear, Luggage compartment cover / roller blind, Tailgate with automatic opening and closing system, Rear lights LED, Hybrid 245 kW (engine 2.0 Ltr. - 145 kW diesel), Infotainment system: Remote & Charging Services Plus, Infotainment system: Remote Services Premium, Isofix mounts for child seat on rear seat, Body: 5-door, Keyless Go start system, Knee airbag driver's side, Instrument cluster with variable display (Widescreen Cockpit), Communication module (LTE) preparation Mercedes me connect, Head airbag system (windowbag), Charging cable for public charging points, Charging cable with earthed plug, Front lumbar supports, electr. adjustable, Mercedes-Benz emergency call system, Model upgrade with code, Multibeam LED, PRE-SAFE system, Wheelbase 2995 mm, Tire repair kit (Tirefit), Tire pressure monitoring system, Reversing camera, Split/folding rear seat backrest, Low-emission in accordance with Euro 6d emissions standard, Front side airbag (sidebag), Darkened rear side windows and rear window, Service system: Extended navigation services, Service system: MBUX Augmented Reality for navigation, Service system: MBUX Navigation Premium, Heated front seats, Smartphone integrated, Mirror package, Voice control system extended functions (MBUX), Standard interior, Underride guard (chrome), USB ports, Pre-fitting car sharing, Pre-fitting navigation services, Pre-fitting remote & navigation services

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Ijdpfx Aaot Hagneaotp Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Year of construction: 2018, condition: as good as new (ex-display), GHIBLI DHR 8 is the standalone system for thermal weeding: the 100% ecological solution against weeds thanks to the action of high temperature saturated steam. Itodpfx Aeg A Rhkoaasp Thermal weeding has many advantages for the environment and health as: • it uses only water • it is safe, even in close proximity to sensitive places such as kindergartens, schools, hospitals. • its use does not require prior notification under the legislation in the field; • it is safe for exposed workers, people and animals, during and after the treatments;

Year of construction: 2006, condition: good (used), Generator, emergency generator, generator, generator, power generator, generator, emergency generator -Electric start -Power: 3.8 KVA 50 Hz -petrol engine -only: 95 operating hours -2x Schuko: 230 volts, 1 socket slightly damaged Itjdpfsflmm Ssx Aaaop -Dimensions unit: 580/530/H615 mm -Weight: 79 kg

Condition: ready for operation (used), approx. 11 pieces = 44 running meters Number of conductors / number of poles: 4 in standard lengths: 4000 mm Itjdpfx Ajd Hapkeaaop for mains voltage up to: 500 V Busbar cross section: 10 mm² Weight: 2 kg / m Load capacity at 100% ED: 60 A

Condition: excellent (used), Year of construction: 2025, fuel type: hybrid, color: orange, Weights Empty weight: 2.330 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.760 cm CE mark: yes Condition Technical condition: very good Itjdpfxow Iazcs Aaasp Visual appearance: very good Other information Delivery terms: EXW Max. horizontal reach: 850 m Max swing of arm in degrees: 180 Max swing of platform in degrees: 320 Transport dimensions (LxWxH): 5,6x0,89x2,01 Production country: IT Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Iedpjtyy Sfjfx Aaastp Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.