Pipe-bending machine

LLC Evolutioner EEM-200plus pipe bender

Condition: used, functionality: fully functional, Year of construction: 2015, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Biegemaster, working width: 6,400 mm, Equipment: documentation/manual, emergency stop, For sale: Biegemaster XBEND 6.1,5 Knjdowxmdyopfx Agzef Bending length: 6400 mm Insertion depth: 1250 mm Reason for sale: acquisition of a new machine Year of manufacture: 2015 The machine was operated in single-shift operation always by the same 3 operators Regular maintenance performed Slight signs of use visible Machine can be picked up approximately 7 months after the date of purchase

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Ksdpfjf Eywwsx Agzenf Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: used, Year of construction: 2017, sheet width 2070 mm plate thickness 25 mm pre-bending 18 diameter of upper rolls 320 mm side roll diameter 260 mm diameter of lower rolls 320 mm 26 kW 8100 kg 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark Kodjwc D Dxopfx Agzonf

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Knedpfxot Hagno Agzof Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: good (used), Year of construction: 2017, APK 81 Shaft 80MM digital hydraulic side rolls Knodpfetddwuex Agzof in very good condition

Year of construction: 2008, condition: used, pressure 315 t stroke 40-200 mm no. of strokes 20-100 Hub/min ram - range of adjustment 120 mm ram surface 2000x1100 mm table surface area 2000x1200 mm hole in the table 1700x250 mm Knedpfx Ajrdi Dlsgzef 500 mm column travel -side 820x650 mm total power requirement 45 kW weight of the machine ca. 44 t

Condition: as good as new (ex-display), Year of construction: 2018, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm weight of the machine ca. 50 kg dimensions of the machine ca. 560 x 220 x 500 mm Manual bead bending machine Description: - Heavy-duty and stable cast iron construction - Adjustable lower shaft - Special steel shafts - Built in accordance with CE standards Ksdpfjraqhxsx Agzsnf

Condition: not inspected (used), Pouch making machine for liquids, hot or cold fill. Ideal for packing Soups, Sauces, Condiments (Ketchup, Mustard, Mayonnaise), Salad Dressing, Tomato Based Products (Pizza Sauce, Spaghetti Sauce), Liquid Eggs. We have two identical machines here from the same sauce factory. Many other machines including kettles, sauce coolers, glycol chillers etc. Knodpjig Ht Isfx Agzef

Condition: new, Year of construction: 2025, CFM-01 MACHINE FOR CUTTING PROFILES Knjdpfjfwxxnjx Agzsf The machine has been designed for cutting profiles used for P20 or P30 ventilation ducts and fittings. The cutting quality is very high, it does not leave any burrs after cutting. Cutting that can be made in any length thanks to the ruler adjustable from 0-1500 mm. The diamond blade used is many times longer than band saws. The machine has a system of pneumatic cylinders responsible for the movement of the disc and material pressure. Thanks to the foot pedal, it provides quick and convenient cutting of profiles.

Condition: new, plate thickness 2,5 mm roll diameter 98 mm throat 160 mm total power requirement 1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 550x1400x1500 m Delivered with: Knjdpfofv H Ehox Agzof • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop