Historical coach fiat 642

FIAT 642

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Gbjdpfxsu S Ahqj Ag Tog Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Condition: excellent (used), mileage: 470,000 km, power: 478 kW (649.90 HP), first registration: 02/2016, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 3,200 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 4,000 mm, total width: 2,550 mm, total height: 6,700 mm, Year of construction: 2016, Transmission: Automatic Number of gears: 12 Transmission model: Volvo I-Shift / 12-speed overdrive gearbox / 3100 Nm / Retarder (incl. cooler) Color: Blue Gbjdpfx Asuu Hcxjg Tog Number of cylinders: 6 Wheelbase: 320 cm Manufacturer: Volvo Model: FH 16 650 6x2 Chassis number: YV2R002C6GA786900 Year: 13-02-2016 Mileage: 470,000 KM Engine: 650 HP / Diesel / 16.1L / 6 cylinders / EURO 6 with SCR / VEB+ Transmission: Volvo I-Shift / 12-speed overdrive gearbox / 3100 Nm / Retarder (incl. cooler) Rear axle ratio: 3.67 First axle: 8,000 kg / Conventional suspension / Tyres 385/65R22.5 Second axle: 10,000 kg / Air suspension / Driven / Tyres 315/80R22.5 Tag axle: 7,500 kg / Air suspension / Tag axle / Tyres 315/80R22.5 Wheelbase: 3,200 mm GVW: 27,000 kg GCW: 60,000 kg Equipment: - Fuel tank: 365 l + 405 l - AdBlue tank: 65 l - 24 Volt, electronic, ABS/EBS connection - PTO hydraulics - 2.0 inch Jost JSK 37 fifth wheel - Pneumatically adjustable sliding frame - Bull bar with 5 lamps - Orange warning beacons - Bi-Xenon headlights - LED taillights - Lane keeping assist - Load indicator Cabin: - Multifunction steering wheel - Cruise control - Sun visor - Storage boxes - 2 beds - Extra insulation layer - Roof hatch - Luxury sleeper control panel - Refrigerator 33 l = Further information = Transmission Transmission: Volvo I-Shift, 12 gears, automatic Axle configuration Front axle: Tyres: 385/65R22.5; Max axle load: 8,000 kg; Steered Rear axle 1: Tyres: 315/80R22.5; Twin tyres; Max axle load: 10,000 kg; Reduction: hub reduction; Suspension: air suspension Rear axle 2: Tyres: 315/80R22.5; Twin tyres; Lift axle; Max axle load: 7,500 kg; Suspension: air suspension Weights Payload: 60,000 kg gross vehicle weight (GVW): 27,000 kg Condition Technical condition: very good Optical condition: very good Damages: none Financial information Price: On request

Condition: new, Year of construction: 2025, machine/vehicle number: 860828850, Gasparin GI1010CV K1 mobile impact crusher on crawler track The K1 impact crusher with tracked undercarriage, the new addition to the product range with impact mill with a capacity of 250 t/h . Can be equipped with re-screening with closed circuit recirculation to perfectly calibrate the final product. It is appreciated for the excellent quality of the crushed product and also gives its best in terms of operating economy. Production capacity: approx. 250 TO/H Proportional distributor with \"Load Sensing \" for optimization of the system and reduction of fuel consumption by approx. 30%. gap hydraulically adjustable even during the crushing operation fast blocking system with wedges and folding cylinders dust extraction system tank pump magnetic separator Gbodpfx Ashd I T Iog Tog warranty 1 year up to max. operating hours from start of operation of the plant Technical data: Impact crusher type M x 700 mm Crushing gap from 30 (20) to 100 mm (gap adjustment to 20mm only possible with 3rd grinding track) Feed hopper 4 m³ - 1800 x 3700 mm single deck vibrating screen 950 x 1500 mm Main conveyor belt 800 x 9600 mm 4 cylinder diesel engine with constant speed 82 HP/60 KW , exhaust gas stage V Control panel chain drive 400 x 2900 mm Weight: kg Transport length 12560 mm Transport width:2550 mm Transport height 3200 mm More information Application: construction, Empty weight: kg, General condition: very good, Technical condition: very good, Visual condition: very good, Transport dimensions (L x W x H): 12.56x2.55x3.2,

Condition: used, machine/vehicle number: 1379A, mileage: 1,638 km, power: 179 kW (243.37 HP), first registration: 11/1986, fuel type: diesel, overall weight: 15,322 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: ABS, all wheel drive, compressor, parking heater, trailer coupling, TUV is made NEW!!! So-KFZ registration , The AM General in a really good condition directly from the Army , Well maintained and maintained, the body is in a super good condition (vehicle from the reserve) , The M944A1 is equipped with: All-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), air brakes with ABS, 3 front seats, the body has the dimensions: L/W/H 5550 / 2200 / 2200.e L/W/H 5550 / 2220 / 1910mm inside, equipment of the body: lathe, tool cabinet with drawers, grinding stand, welding unit, permanently installed power generator 110 Volt 31KVA driven by vehicle engine (Cummins with 105 operating hours) via auxiliary drive, 2-piston compressor with compressed air tank, air connections in the body, trolley, loader, impact wrench large and small, grinding witch, air connections in the body, trolley, loading device, impact wrench large and small, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch. and small, grinding witch, magnetic drill, vice, large auxiliary heating and ventilation, many sockets, interior lighting, both sides and the rear of the body can be opened, the km are miles, driving license class 2 (truck), tire size 14.00R20 (very good condition) tubeless, top speed 90 km / h, displacement 14011cm? , , 24Volt power supply , The M944A1 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timer AM Generalist also already for conversion as a motorhome and long-distance traveler, . All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Gsdpfxjqx Sxae Ag Tobg

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, overall weight: 1,700 kg, fuel type: diesel, tank capacity: 180 l, color: white, output current: 435 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 110 kW (149.56 HP), continuous power: 100 kW (135.96 HP), total length: 2,750 mm, total width: 1,100 mm, total height: 1,450 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Ricardo, Cummins, type of cooling: water, type of input current: three-phase, Three-phase stationary generator Proton ZPP 100 (100kW - 110kW) in a compact housing resistant to precipitation and additionally soundproofed. The aggregate has an external automatic reserve switching system SZR (Autostart) and many other functions as specified later in the description. - Model - Proton ZPP 100R SZR - Maximum power - 110 kW / 140 kVA - Rated power - 100 kW / 125 kVA - Prepared for operation - Yes (Flooded with fluids, test run) - Type - Industrial genset - Condition of the aggregate - Factory new Gbodpjtpnm Usfx Ag Tsg - Manufacturer - Proton - Generator type - Three-phase - VAT invoice 23% - Year of production - 2024 - Warranty - 36 months ⊳ ENGINE: Engine model - Ricardo R6105AZLDS Fuel type - Diesel (Diesel) Combustion: - 22.0 liters per hour (at 75% of maximum power) - 14.5 liters per hour (at 50% of maximum power) Engine configuration - In-line (R4) Displacement - 7000 cc3 Direct injection Lubrication method - Forced, engine with oil pump ⊳ ENGINE: 100% Copper AVR voltage stabilizer - Yes Alternator model - Proton 274D 400V rated power - 100000 watts (100kW / 125kVA) 400V maximum power (up to 15 minutes) - 110000 Watt (110kW / 140kVA) Rated power 230V - 33000 watts 230V maximum power (up to 15 minutes) - 36600 Watt Rated current (400V) - 435.0 A Current protection - C16, C32, main - 200A Frequency - 50 Hz Generator construction - Synchronous ⊳ ENCLOSURE: Silenced enclosure Precipitation resistant housing Three-phase and single-phase sockets Fuel tank capacity - 180 liters Operating time on full tank (Average) - 20 hours Transport kit - Holes for forks and HDS transport hooks Dimensions 110 x 275 x 145 cm Gross weight - 1830 kg ⊳ FEATURES: Voltage stabilizer (AVR) - Stamford SX460 (2%) - Electronic voltage stabilization with variable load - electronic frequency stabilization Automatic operation of the genset SZR (Self-actuated reserve switching) Thermal overload protection Sensor for oil pressure, oil level, coolant level Glow plugs Oil sump heating Heating of the cooling liquid Battery - 2 pieces 120Ah Automatic charger ⊳ CONTROLLER: Controller model - Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module extensions Integration with SCADA system Additional outputs - for 4G, Ethernet, RS232/485 connections GPRS remote control and monitoring - Optional Modbus, Ethernet communication - Optional Why us? We are a company specializing exclusively in generators, for more than 17 years we have been operating in this industry constantly striving to make sure that our products represent the highest quality and are as reliable as possible. During this time we have provided solutions to more than 10,000 customers in Poland even in its remotest corners. Suppliers of components of our units are selected meticulously, we make sure that they are leaders in their industries. We have a wide range of gensets from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: new, Fiber laser 30W Marking area: 200 x 200 mm Workpiece size max: WxHxD: 550 x 450 x 350 mm Laser type: Fiber 30 Watt Wavelength: 1064 mm Marking speed max. 7000 mm/sec Z-axis motorized H: 700 mm Repeat accuracy/lens: +/- 0.001 mm Line thickness min. approx. 0.01 mm Power supply 240 V/50 Hz. External dimensions: 110 x 80 x 200 cm Front door: manual Incl. software and PC Can be inspected on site under power Gbsdpforu E Svsx Ag Teg Net price plus VAT

Condition: used, mileage: 790,000 km, power: 357 kW (485.38 HP), first registration: 07/2011, fuel type: diesel, overall weight: 23,500 kg, axle configuration: 6x4, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Here is your chance to drive a US truck and transport 28 pallets if necessary. Gjdpfx Agoqx Sulo Tsbg The price is incl. the trailer (EZ. 2015) We can also remove the body completely for you so that you have a SZM again or just purely as a show truck for cruising. Conversions such as chrome parts and leds are included in the price after consultation with you !!! Cummins ISX 15 L 18 Speed Fuller 2 beds Original Peterbilt leather seats Inside typical Peterbilt everything your heart desiresThe truck has too many extras to list. - Further questions by email or phone. - Price incl. German letter. - Errors and prior sale reserved - financing and trade-in possible, offer everything. - TIPPING HYDRAULICS POSSIBLE FOR AN EXTRA CHARGE!!! - . - OUR motorhomes ARE REGISTERED AND TAXED IN GERMANY AND ARE INCLUDING AN EU VEHICLE LETTER . WITH US, THE NAME HAS QUALITY WE CAN - - Your dream vehicle not included in Europe's largest US truck fleet ? Not your company or favorite color? No problem... we have over 500 more trucks or motorhomes in the USA and Canada new and used of all brands also work with one of the best paint shops in Germany let us advise you and make a free offer. we look forward to your call or uchstermine are unfortunately only possible with an appointment.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: CN6-15000384, We sell a used Mindray Doppler ultrasound, type DC-60, MFG: 05/2021, serial no.: CN6-15000384, weight 85 kg, Gbjdol E H Unjpfx Ag Tog Device specifications: Color Doppler ultrasound unit with 21.5’’ FULL HD LED monitor i 13.3’’ LED touch screen 4 transducer ports, HDD 320GB, USB ports, DVD-RW Specifications: PW Doppler, Color Doppler, DirPower Doppler, THI, PSHI, iClearTM, iBeamTM, iTouchTM, Echoboost, FCI, HR Flow, iStorage, WiFi, MedSight, MedTouch Optional: CW, 3D/4D, Free Xros, iPageTM, SCV, STIC, CMPR, Color3D, iLiveTM, Stress Echo, TDI... This equipment has 3 transducers: The Mindray SP5-1N Phased Array transducer has a frequency range of 1.0 MHz. - 5.0 MHz. and supports the following applications: Form Factor: Phased Array; Applications: Cardiac; Frequency Range: 1.0 - 5.0 MHz; Compatibility: Consona N-Series The Mindray L13-3 Linear Array transducer has a frequency range of 3.0 MHz. - 14.0 MHz. and supports the following applications: Small Parts, Vascular, Musculoskeletal, Pediatrics. Form Factor: Linear Array; Applications: Small Parts, Vascular, Musculoskeletal, Pediatrics; Frequency Range: 3.0 MHz. - 14.0 MHz. Compatibility: Mindray DC-4 The Mindray C5-1s Curved Array transducer has a frequency range of 1.0 MHz. - 5.0 MHz. and supports the following applications: Abdominal, Pediatrics, Obstetrics, Gynaecology. Form Factor: Curved Array; Applications: Abdominal, Pediatrics, Obstetrics, Gynaecology; Frequency Range: 1.0 - 5.0 MHz.; Compatibility: Mindray M9 Mindray’s brand-new solution is an excellent fusion of continuous customer insights into clinical needs, combined with continually evolving cutting-edge ultrasound technologies. Full of vitality, with the goal of insight into the future and pursuit of the infinity, it is constantly improving with increased scalability. As an all-around partner, DC-60 Exp with X-Insight devotes to provide a comprehensive solution to help you manage all-aspect daily clinical practice with ease and certainty. Based on the deep insights of customer needs, the DC-60 Exp with X-Insight is designed to deliver high efficiency with precision imaging, which is empowered by eXpress Clarity, eXceptional Intelligence and eXceeding Experience. Price: 19.900 Euro + VAT, FCA Bucharest/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 180 Press’ Object of sale: 1 x Xerox Versant 180 with the following equipment: incl. Fiery Server EX180 incl. Paperdeck A-CF03 incl. booklet finisher incl. Squarefold + Fronttrimmer incl. Creaser Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Gbsdpfxsvtpnlo Ag Teg Counter readings: Total: Approx. 2,573,792 pages Colour: Approx. 2,368,409 pages Black: Approx. 205,383 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: good (used), Model: Wachtel Piccolo 1-4 Electric deck oven for 4 trays 600x800 mm Manual control Gbsdpfx Aexxgnpeg Tsg Lower shelf for 4 trays 600x400 / 600x800 Connection: 400V, 16A CEE plug Dimensions: 970 x 1250 x 1900 mm (W x D x H) 3/4 inch water connection Oven on castors with locking wheels Used oven Options: Water filter Baking trays Pressure reducer Delivery service Many more ovens in stock!