Keyseating Machine

FRÖMAG A18

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Kjdpsv Dvhysfx Agzenf Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: used, Year of construction: 2017, sheet width 2070 mm plate thickness 25 mm Knsdpfx Agowc D Dxszsf pre-bending 18 diameter of upper rolls 320 mm side roll diameter 260 mm diameter of lower rolls 320 mm 26 kW 8100 kg 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark

Condition: new, Year of construction: 2023, Weight 950 kg Power voltage 3 x 400 V Motor power (S6) 9,2 kW / 12 PS Dust extraction connection 160 mm Knjdemdr A Ejpfx Agzof diameter knife block 120 mm Number of knives 4 Dimensions knives 630 x 30 x 3 mm Max. Cutting depth 8 mm Width 630 mm Height capacity thickness planer 3 - 300 mm Dimensions thickness planer table 1160 x 630 mm Variable feed speed 5 - 22 m/min. Diameter feed rollers 70 mm incl. TERSA.cutterblock Picture contains special accessories

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Heidenhain iTNC530, ISO SK50 spindle taper, Knjdpfx Agjvz A Riozsf 5,000rpm Spindle Speed, 60 station toolchanger, coolant, Interlocked guards.

Condition: good (used), for sale: several used clamping brackets / boring mill brackets 1500 to 1800mm wide 2500mm high 1250mm deep Mass: 5,8t Load capacity 60t 6 pieces available partly with stairs Kedpfxsg Sbbxs Agzsnf

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Kjdpfx Asv Drigsgzenf Heidenhain control Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: new, Year of construction: 2024, Engine 15 kW Splitting pressure 30 tons Automatic saw yes Maximum log diameter 500 mm Maximum log length 500 mm Feed hydraulic (length x width) 1800 x 390 mm Maximum lifting height when splitting 230 mm (hydraulic) Saw and feeder control hydraulic Joystick control Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Saw speed 10000 rpm Cylinder diameter 4.5 " Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Ball hitch 50 mm Wheels 22x11-10 ATV Kedpfx Agov Dvkzszsnf Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: used, Year of construction: 1966, max. tractive force 5 t, max. stroke 850 mm, max. cutting speed 12m/min, max. return speed: 25m/min, clamping surface 410x575 mm, groove width 3 - 90 mm, bore 13 - 500 mm, workpiece weight: 6000 kg, depth of machine base under floor 1.400 mm Kedpfecm Elnox Agzjnf

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Knodpfx Aspcibmjgzsf

Condition: ready for operation (used), There are 26 motors available. Kjdpfxoikrb Is Agzjnf