Bead Mill

Gebr. Pfeiffer UV 1600

Condition: excellent (used), Year of construction: 2003, pressure: 13 bar, 1 fired steam boiler ----- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 sqm Boiler capacity max. : 1.250 kg/h Operating overpressure : 13,0 bar increased test overpressure : 24.05 bar Water content at NW approx. : 993 l Water content full approx. : 1,365 l Year of construction : 2003 CE mark : 0036 equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control system, switch cabinet, feed water pump and the existing coarse and fine fittings. Rodpfxsuugi So Agzjl Econmizer: Eco 3, 82 kw, 31 bar, 238°C, 28 ltr.

Condition: ready for operation (used), DRUM MOTORS drum motors used Rodpei A Apusfx Agzsl large stock of belt width 300-1400 mm

Year of construction: 1990, condition: repair required (used), Mobile jaw crushing system, operating hours approx. 10.000, engine Caterpillar 6 cylinders with generator set approx. 35 KVA, year of construction approx. 1990, jaw crusher KUE-KEN (KK114 inlet 1140 x 750 mm) incl. magnetic tape (iron separator), total weight 48 tons on semi-trailer chassis. Condition: Motor and conveyor systems run perfectly, only the drive shaft of the crusher is defective (damage approx. € 17.000) Rjdpfxehz Dmgs Agzol

Year of construction: 2018, condition: as good as new (ex-display), GHIBLI DHR 8 is the standalone system for thermal weeding: the 100% ecological solution against weeds thanks to the action of high temperature saturated steam. Thermal weeding has many advantages for the environment and health as: • it uses only water Rsdpfx Agog A Rhkjzel • it is safe, even in close proximity to sensitive places such as kindergartens, schools, hospitals. • its use does not require prior notification under the legislation in the field; • it is safe for exposed workers, people and animals, during and after the treatments;

Condition: used, functionality: fully functional, fuel type: diesel, color: red, overall weight: 5,000 kg, Year of construction: 2019, We are selling our Bohak well drilling machine. The machine was only used for private drilling and has therefore only had a few working hours since its purchase in 2022. Rsdpfxsv I S Epj Agzol The detailed description can be found on the last page of the pictures, as it is very comprehensive. The drill rods include 33 rods of 3 meters each. The drill heads are listed in the description on the last picture. Everything you need for drilling is included, so you can get started right away. The machine is functional and can be inspected on site. Detailed instructions and circuit diagrams are available upon request. Additional pictures are also available upon request. We purchased the machine used and overhauled directly from the manufacturer in 2022. The original invoice is available for inspection. The price is net, VAT is not included. The machine is located in Worms-Rheindürkheim. Please feel free to inquire by phone. Warranty and guarantee excluded

Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: 1) CT-6 Centritherm evaporator mounted on skid 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel 4) Duplex filter 5) Feed pump model Rsdpfslc Dwvex Agzjl 6) Concentrate pump model 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping 11) Tools for lifting cones and the bowl 12) Original technical documentation in German.

Condition: new, functionality: fully functional, fuel type: gasoline, overall weight: 2,700 kg, Year of construction: 2025, operating hours: 1 h, PROMAX SCREEN DRUM T 2000 SPECIFICATION OF THE MACHINE General dimensions Transport length: 5.92 m Operating length: 8.1 m Width: 2.185 m Height: 2.65 m Weight: 2850kg capacity Hopper: 1.4 m3 Fuel tank: 18 liters Engine: Mosa Type: GE13000 Power: 13KVA fuel: Gas Fuel consumption: 2.5L - 3.9L per hour TASK BUNKER Gearbox: Motovario B083 R105-1 90B5 Electric motor: Hansler 0.75 kW, 6-pole, B5 IE3 Belt width: 450 mm Band length (drum center): 2.28 m Band: EP250 2-layer C15 Chevron 3+1.5mm Variable speed drive Fines conveyor Transmission: Motovario NMRV 90 R7.5-1 100B14 Electric motor: Hansler 2.2 kW, 4-pole, B14 IE3 Band width: 1600 mm Belt length (drum center): 2.26 m: Belt: EP250 2-ply 3+1.5 mm Oversized conveyor belt Transmission: Motovario NMRV 90 R7.5-1 90B14 Electric motor: Hansler 1.5 kW 4-pole B14 IE3 Belt width: 450 mm Band length (drum center): 2.26 m Band: EP250 2-layer C15 Chevron 3+1.5mm Drum diameter: 1.0 m. Length: 2.0 m Gearbox: Motovario H042 R10-1 90B5 Redjrhzmtopfx Agzel Electric motor: Hansler 2.2kW 5-pole B5 IE3 motor Variable speed drive

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Rodped H Sc Esfx Agzjl Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Year of construction: 1986, condition: good (used), machine/vehicle number: 2057, Hosokawa Alpine ZPS 315 classifier mill Universally applicable for materials up to a Mohs hardness of approx. 3.5 with requirements for very high final fineness with the lowest possible energy input. Rsdpfx Agsqi Hhpezjl Classifier mill for high finenesses, cool grinding and flexible production parameters in the fineness range from less than 5 µm to 200 µm Impact beater mill with Turboplex classifier integrated in the upper section for precise particle size limitation Welded construction, grinding tools made of special steel The mill is available complete with accessories, such as: suction filter, rotary valves, cyclone, filter, fan, piping, control cabinet

Condition: used, Year of construction: 2007, Ulma Atlanta - E Rjdpfx Agsu Rb Agozjl