Heavy Forklift - Diesel

Hyster H32.00F

Condition: used, functionality: fully functional, machine/vehicle number: E008E02044C, Year of construction: 2005, operating hours: 10,488 h, load capacity: 32,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,700 mm, power: 113 kW (153.64 HP), fork length: 2,700 mm, empty load weight: 44,080 kg, drive type: Diesel, Heavy-duty forklift – Diesel Chassis number: E008E02044C Load center: 1200 Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 16.00-25 Front tire condition: 60 - 80% Fjdpfxezr Amuo Al Uepn Rear tire type: Pneumatic Rear tire size: 16.00-25 Rear tire condition: 40 - 60% Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container forklifts, reach stackers, forklifts, and terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase, and financing at fair terms are always possible for us. We are also happy to buy your used equipment, even if you do not purchase a vehicle from us. Call Marco Levermann; I will be happy to provide you with detailed advice on this MAKE - MODEL. By the way: Our forklift workshop specializes in the repair and maintenance of large equipment from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale. Side shifter, fork positioner, With coil or forks 2.70m – both available.

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: Fpjdedrtalepfx Al Uon a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Year of construction: 2020, condition: new, Transport systems Fpjdpjfz U S Eefx Al Uen Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2019, condition: new, Recirculating air convection furnace Gas-fired furnace CGN Powder coating oven NEW – SGS-800/O Fedpfecw Tzxsx Al Uepn Gema Optiflex Width: 2500 mm, Height: 2500 mm, Depth: 12500 mm Directly from the manufacturer. For more information, visit Romer-Deutschland.

Condition: new, Year of construction: 2026, Equipment: ABS, 5 Axle Lowbed Please get contact with us for more informaiton; Fjdpfx Asrlm Txel Uepn

Year of construction: 2023, operating hours: 11 h, condition: as good as new (ex-display), machine/vehicle number: MA0144_1922, Exhibit: Compressor Kaeser SX 8 (10 bar) Fpodjh Ey Rcepfx Al Usn with SIGMA CONTROL 2 Year of construction: 2023 Operating hours: 1 Bh Techn.Daten: Volume flow at 10 bar: 0.67 m³ / min Motor power: 5.5 kW Electrical connection: 400 V / 3/50 Hz Dimension W x D x H: 590 x 632 x 970 mm Weight: 155 kg Connection compressed air: G 3/4 " Sound pressure level: 64 dB (A) Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors

Condition: new, pressure 500 t column daylight 600 mm stroke 600 mm table surface area 3500 x1500 mm 600 mm feed down 8 mm/sec feed up 16 mm/sec travel on the bed 2200 x 900 mm total power requirement 30 kW Fpjdpfx Alofv Awhj Usn weight of the machine ca. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Year of construction: 2023, condition: new, Polyp Scrap Grapple for Cranes Palfinger Hiab Capacity: 300 Lt / 0.3 m3 Fedpfx Alonziblo Ujpn Model: 4 Tinned - Half Closed Gross Weight: 450 Kg

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 42 ratings ✈️shipping : 45-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ⭐€10,850 EXCL.VAT & SHIPPING⭐ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Paint Booth – WETLINE-SP-1500 ✔️ Internal dimensions: 1390 mm L * 1500 mm W * 1400 mm H ✔️Pool height : 561 [mm] ✔️Filter system : double layer water curtain ✔️Filtering material : city water, plate filter and mechanical separator with backwash ✔️Filter material cleaning : thin and thick grid ✔️ Pump output : 1.5 [kw/h] 940 [d/d] x 1 piece ✔️Number of fans : 1 piece ✔️Fan performance : 5,400 m3/h x 1 ✔️Fan motor power : 3 kw/h ⭐The cabins can be made of galvanized sheet metal or stainless steel. They can be designed to be integrated into the automatic and manual systems. ⭐At the pool there is a platform for material and personal safety. The platform covers the entire pool. ⭐In the Filterline wet painting booth, environmental pollution is prevented by the simultaneous use of 3 different filter systems. ⭐Wet paint particles, sucked in the air by a suction fan, are caught by the water curtain at the back of the cabin and transported into the pool. ⭐Wet paint particles in the trace amount that are not caught by the water curtain are caught by the separators on the suction ducts on the back of the water curtain, and the fresh air outlet is from the flue. Fjdpfx Aec Uthdel Uopn ⭐The backwash system is applied in the separator section to help the process of retaining the wet paint particles of the separators. The filtration efficiency, whose contact area is increased by spraying wash water through the nozzles, is maximized. ⭐While paint dirty water accumulated in the basin enters the pump suction chamber, it goes through a coarse and a fine mesh to prevent clogging of the pump spray water, thus ensuring paint particles are retained. ⭐When the dirty water in the pool becomes unusable, it can be disposed of from the waste water valve located behind the grates in the suction department. ⭐By using a paint separator system, the water in the pool is cleaned from the paint and used continuously. ⭐The separated paint residues are drained by a filter press and must be disposed of properly. ⭐Price quoted is for the smallest standard size in stainless steel. All devices/machines are new, not used. Do you want a special configuration ❗ Call us now❗ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, sheet width 700 mm plate thickness 2,0 mm Fjdpfx Ajrrkdkol Uepn distance between columns 750 mm diameter of upper rolls 76 mm total power requirement ß,75 KW weight of the machine ca. 0,29 t dimensions of the machine ca. 1,3 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate