Radial piston motor

IAM 1800/C

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication Hjdotycdkspfx Ag Rsfn - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: new, Year of construction: 2017, functionality: fully functional, cooling capacity: 16 kW (21.75 HP), type of input current: three-phase, type of cooling: air, overall weight: 227 kg, input voltage: 400 V, total width: 700 mm, total length: 1,100 mm, total height: 1,400 mm, warranty duration: 12 months, heating capacity: 18 kW (24.47 HP), Aircooled chiller/heat pump Blue Box Epsilon Echos 16 kW / 18 kW Cooling capacity: 16 kW (12/7 — 35°C) Heating capacity: 18 kW (40/45 — 7°C) Year of manufacture: 2017 Options: heat pump Heat exchanger: plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Siam ( scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1.10 x 0.70 x 1.40 m Weight: 227 kg Working hours: 268 h Condition: excellent, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Hfjdpfx Aox Uyf Aog Rsn Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 1965, condition: good (used), functionality: fully functional, machine/vehicle number: 2549, General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Hfedpfotuuvzex Ag Rsn Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter - Tractive force display Accessories - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. The machine is available for inspection in our warehouse. The machine is new in our stock and is currently not technically or visually refurbished. Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Year of construction: 2007, condition: excellent (used), Used Bitzer 4TCS-8.2Y-40P/sn 1672508990, semi-hermetic reciprocating compressor on Freon. Scroll compressor ESH736Y-40S/sn 1072500425, 2 vertical receivers Bitzer FS 152/sn 1172402177 and Bitzer FS 302/sn 1172601712 The system is complete with an oil separator, oil tank and pressure and safety switches/gauges. Year of manufacture 2007. Nominal Pressure 19 bar Output (m3 /hour) 41.33 m³/h Engine power 20.6 kW Volts 400 V Frequency 50 Hz Sound level 74.5 dB(A) Weight 134 kg Condition goo Cooling capacity 21.6 kW Refrigerant R404A Number of cylinders x Diameter x Piston head 4 x 60 mm x 42 mm Intake line 35 mm - 1 3/8" Delivery line 28 mm - 1 1/8" according to the productivity according to the EN12900 standard ▼ tc ► to 5°C 0°C -5°C -10°C -15°C -20°C -25°C -30°C 40°C Q [W] — — 27759 22788 18477 14755 11559 8831 P [kW] 9,86 9,05 8,2 7,34 6,46 5,57 I [A] 16,69 15,43 14,14 12,83 11,52 10,22 45°C Q [W] — — — 20560 16622 13219 10294 7796 P [kW] 9,41 8,47 7,52 6,57 5,6 I [A] 15,99 14,54 13,1 11,67 10,26 50°C Q [W] — — — 18347 14792 11714 9065 6801 P [kW] 9,74 8,71 7,68 6,65 5,61 I [A] 16,5 14,91 13,34 11,8 10,28 Conventions • tc - condensation temperature • to — evaporation temperature • Q [W] - cooling capacity (R404a) • P [kW] - power consumption • I [A] - current Price Euro 2.250 Euro + VAT, negotiable, FCA: Oradea/Romania Hodpfxjir E Dns Ag Refn Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 1963, condition: used, machine/vehicle number: 18135, Broaching Machine – Horizontal Hjdpfxebrcy No Ag Refn Manufacturer: Forst Typ: RIW 100/2200 Force: 100 Tons Stroke: 2.200 mm It is possible to buy the Crane - see offer no Y941

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm Hsdpfxotqm Dme Ag Rsfn table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Condition: good (used), Year of construction: 1977, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 200 t, table width: 800 mm, table length: 1,100 mm, throat depth: 440 mm, distance table to ram: 400 mm, total length: 37,200 mm, total width: 24,000 mm, total height: 18,200 mm, overall weight: 12,600 kg, ram adjustment: 110 mm, ram stroke: 40-180 mm incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 1/min Distance table/ram - adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter Hfjdpfxstu Hvwo Ag Ron

Condition: used, Compressor DWM Copeland Hjdpfxexlhzwj Ag Rsfn -Type: D6DH3-3500-AWM/D -Volume: 106.3 m3/h -Cooling capacity: 74 kW at -5°C/40°C, 61 kW at -10°C/40°C, 32.75 kW at -25°C/40°C -Refrigerant: R404A -Quantity in stock: 3 -Reference number: S 246 -Condition: Used in very good condition, ready to work

Condition: excellent (used), Manufacturer: Grundfos Type: NB80-250/220 A-F-A-BAQE Speed for pump data: 2940 rpm Hedjncd A Njpfx Ag Rsfn Rated flow: 73.1 m³/h Rated head: 57.6 m Actual impeller diameter: 222 mm Impeller nom: 250 mm Maximum ambient temperature: 60 °C Maximum operating pressure: 16 bar Flange standard: EN 1092-2 Pump inlet: DN 65 Pump outlet: DN 50 Pressure rating: PN 16 Net weight: 191 kg Gross weight: 216 kg

Year of construction: 1998, condition: used, SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control Hjdpfx Ajimwtrog Rofn - n. 3 cnc axis - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm - volt. 380/50 - s/n 06 - CE rules (year 1998)