Fork Lift Truck - Diesel

IRION DFG/5027/Se

Condition: used, fuel type: diesel, weight max. in kg:5000 kg Load Arm:600 mm Laodecxxzhjpfx Abnjc arm length:2000 mm stroke:3200 mm :12000 kg :4500 kg height over floor:2460 mm weight of the machine ca.:8,2 t dimensions of the machine ca.:4,15 x 1,45 x 2,46 m :3,05 x 1,45 x 2,46 m Diesel boom-fork lift with particle filter, hydraulic swivelling 2-fold telescope boom with 2 hooks, up to max. 2000 mm extension 5000 kg at 600 mm SL; 3700 kg at 1000 mm SL; 3050 kg at 1400 mm SL. Solid-rubber tyres. Engine temperature indicator, front lights, brake lights, indicators front and rear, reversing lights, adjustable driving seat. UVV until 02/2008.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, operating hours: 13,000 h, * 13,000 hours * Tyres 70% Lodpfxsy E Hd Hs Abneac

Condition: used, grinding length 1000 mm grinding width 750 mm workpiece height 700 mm Control SIEMENS, SIMATIC S 7-1500 table surface area 1050 x 640 mm table height over floor 1000 mm table speeds 3.000 - 30.000 mm/min cross feed of table continual 5 - 5.000 mm/min cross feed of table intermittent 0,1 - 65,0 mm vertical adjustment, 1 graduation 0,002 mm rapid traverse vertical 0,25 m/min grinding spindle speed 50 - 2.500 U/min Ledpexukqysfx Abnjac grinding wheel size ø 400 x 50 x ø 127 mm workpiece weight max. 1.000 kg table load max. 1600 kg total power requirement 33,2 kW weight of the machine ca. 9,3 t dimensions of machine L x W x H 4,50 x 2,37 x 2,65 m - complete electronic / electric renewed in 2018 Accessories: magnetic plate 1000 x 650 mm, grinding wheel with flange, wheel trueing attachment, extraction

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 20,200 h, load capacity: 5,500 kg, fuel type: gas, Equipment: clamp, gripper hydraulics, For sale is a Hyster S 5.5FT gas-powered forklift. The forklift is fully functional and in good condition. Not offered with forks as shown, but with a Mayer paper roll clamp with rotary hydraulics from 2005 (last photo). Technical specifications: Year of manufacture: 2012 Rated load: 5500 kg (5.5 tonnes) Load center: 600 mm Turning radius: approx. 2375 mm - 2534 mm Lift height: up to 5300 mm Free lift: available Transmission: DuraMatch™ 1-speed or DuraMatch™ 2-speed Travel speed (loaded/unloaded): approx. 16.7 - 17.2 km/h Lodpfx Abewalyisnoac Dimensions: approx. 3,500 mm * 1,420 mm * 2,500 mm mm Weight: approx. 7,800 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website

Condition: used, machine/vehicle number: 59062, Rill- und Leimmaschine für Umschläge - Creasing & Gluing machine for Covers Karl Tränklein CGM (b)Serial-No. 59062/5 Working width max. 500mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Laodpfx Absh Axd Nsnsc

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 98 h, load capacity: 200 kg, lifting height: 13,000 mm, construction height: 2,100 mm, fuel type: electric, drive type: Elektro, Articulating boom lift Technical condition: very good Front tyre type: solid rubber Front tyre size: 600x190 Rear tyre type: solid rubber Rear tyre size: 600x190 Battery voltage: 48V CE certificate, Lodpovky D Ssfx Abnoac

Condition: new, Year of construction: 2024, ✅ New & in stock ✅ Up to 100mm branch thickness ✅ Shipping possible SCHORR WOOD CHIPPER 100MM BRANCH THICKNESS RR100THX Powerful wood chipper for branches up to 10cm in diameter. Extremely robust and compact. -- 196cc petrol engine with 5.6 HP -- Self-feeding no additional pressure necessary -- 360° ejection -- Compact size -- High user-friendliness -- Extremely robust and reliable EQUIPMENT / FEATURES POWERFUL LIGHTWEIGHT The SCHORR RR100THX wood chipper impresses with its practical size, which maximizes flexibility when used in different locations. Thanks to its width of just 600 mm, the shredder fits easily through any standard door and can therefore also be used in places that are difficult to access (e.g. gardens). With an operating weight of 93 kg in combination with the two tubeless wheels, the shredder is easy to store and transport, even in confined spaces. RELIABLE IN EVERY RESPECT The high-quality cutting unit of the shredder has 2 blades and 1 counter blade made of high-strength steel. The material of the blades is designed for the special requirements of the shredder, it is extremely resistant and at the same time not brittle. The low feed height of 910 mm makes it easier to feed in the wood and thanks to the large feed hopper, you save time by processing large quantities quickly. HIGH LEVEL OF SAFETY AND EASE OF USE Important safety features such as an emergency stop bar on the handle or the central emergency stop button maximize work safety. The integrated catch guard in the feed hopper prevents small pieces of wood from flying out of the hopper. The motor is also equipped with a low oil sensor. This prevents the engine from starting if the oil level is too low to avoid serious engine damage. The ergonomic design of the controls and easy access to maintenance areas complete the practicality of the wood chipper. LOW FUEL CONSUMPTION A major advantage of the efficient engine is the low fuel consumption and the associated reduction in environmental impact. The 196 cc engine also produces less noise than larger machines, making this shredder ideal for residential areas. Technical data Manufacturer (abbreviation): SCHORR Laodpfx Abot Ivaasnjc Type designation of the manufacturer: RR100THX Drive type: V-belt 13x860Li Max. Branch thickness: 100mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter blade Own weight: 93kg Basic dimensions Total length: 1450mm Overall width: 600mm Total height: 1080mm Discharge angle: 360º Engine capacity Displacement: 196ccm Power max: 4,1kW / 5,6PS Starter: Reversing starter Our expert team will be happy to answer any questions you may have about the SCHORR HOLZHÄCKSLER 100MM ASTSTÄRKE RR100THX. We look forward to hearing from you and assisting you with advice. Are the purchase costs for a wood chipper too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, which you can take advantage of, please contact us.

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Lajdpfxou Nu His Abnec Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: new, - Shaft diameter 50 mm - Upper roller hydraulically driven - Three rollers powered Laodogg N Twspfx Abnec - Digital display - Can be used horizontally/vertically - Foot switch - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 1990, grinding length 1500 mm grinding width 550 mm workpiece height 400/450 mm table-size 1900 x 450 mm mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 15 kW voltage 380 V weight of the machine ca. 5 t Machine was reconditioned and modernized in 2015 with modern control. Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges. Laedewlvirjpfx Abnjc