Bag making machine

Jianshe ZDQFP14B

Condition: used, Year of construction: 2017, Technical data: Number of printing units: 8 Maximum printing width: 1270 mm Maximum web width: 1320 mm Minimum web width: 300–570 mm (depending on unwind/rewind specification) Minimum repeat length: 360 mm (ARUN system: from 380 mm) Maximum repeat length: 800 mm Repeat length adjustment: increments of 0.1 mm; correction ±2% Anilox roller internal diameter: 136.989 mm Anilox roller circumference: 500 mm Sleeve length: 1350 mm Maximum mechanical speed: 500 m/min (or 400 m/min for basic unwind/rewind) Operating printing speed depends on substrate, inks, transfer, plate type, image, screen ruling, anilox volume, etc. Corona treatment unit (Ahlbrandt) Gas drying Non-stop shafted unwind 1000 mm Non-stop shafted rewind 1000 mm Dsdpsx H Unvjfx Agdjul Automatic viscosity control (INKSPEC) Additional drying enhancements (ECLIPSE gas burners) Infeed/outfeed extensions Automatic sleeve change systems Central chiller for temperature stabilization (Hyperchill ICE039) Ionisation system (SIMCO) Side-lay control (Erhardt+Leimer) EFFICIENCY maximum mechanical speed: 500 m/min FALCON – automatic print register and impression setting Advanced print inspection system FAST BLADE – integrated doctor blade quick-change system INKSTORM – automatic wash-up system (optional feature) Bosch Rexroth INDRAMAT direct-drive technology JOB MANAGEMENT – remote job preparation from PC PRINT QUALITY CDTS – central cylinder thermal stabilization system PCTS – thermal stabilization for anilox and plate cylinders PPP – printing plate protection DYNAMIC IMPRESSION – electronic compensation of inking unit impression forces Machine design focused on high print stability with composite graphite sleeve EASY OPERATION Intuitive touch screen Easy access to web path Doctor blade chambers with FASTBLADE quick-change system FASTADAPT – automatic chamber positioning adjustment

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Digital label finisher Valloy Duoblade WX I with four cutting heads. Machine used only for demonstration purposes. Main technical information: Media width: 100-350 mm. Number of cutting heads: 4 units. Dedpjxv Adzofx Agdjul Automatic selection and adjustment of heads according to the cutting file Cutting speed up to 9 m/min. Maximum label size: 350x600 mm. Cutting accuracy: +/-0.2 mm. Automatic web tension control with magnetic powder brake CCD camera for reading registration marks and job numbers Lamination system "Web guide" system Sheeter option

Condition: used, Year of construction: 2018, functionality: fully functional, ∙ BQ-470 (2018) - USED - HORIZON BQ-470 (EVA) Total Counter: 609212 - AC-470L (Delivery Conveyor Long) - VS-470 (Smoke Extractor) ∙ Specifications Binding Modes: Binding with milling, Binding without milling, and Pad binding Number of Clamps: 4 Book Block Size (Top-Bottom x Fore-edge) Max. 320 x 320 mm Min. 145 x 105 mm Book Thickness: 1 to 65 mm (Book thickness may be limited depending on sheet weight, book size, and milling depth.) Cover Size: Max. 320 x 660 mm Min. 135 x 225 mm Cover Stack Height: Max. 150 mm Dedpfoxr S Arjx Agdoul Warm-Up Time: 60 min Cycle Speed: Max. 1,350 cycles per hour (EVA) Voltage / Frequency: 3-Phase 200V. 50 / 60 Hz

Condition: excellent (used), Year of construction: 2021, Automatic Folding Carton Gluing Machine ETERNA EFOLD 1100 ELITE Year of manufacture: 2021 ETERNA – A Bobst Group Company - Lateral alignment at the feeder (both sides) - Tools and devices for 4-point and 6-point gluing - ERO gluing system (cold glue), year of manufacture 2020 - Pre-breaker Technical details: Djdpfxsw I Ey Do Agdsul Paper weight: 200-800 g/m² Total power requirement: 35 kVA

Condition: used, Year of construction: 1997, functionality: limited functionality, product width (max.): 510 mm, working width: 505 mm, • Model: Gallus Arsoma EM 510 • Year of Manufacture: 1997 • Web Width: 510 mm Dujdew Ec Smopfx Agdsl • Printing Units: 7 x UV flexo units • Die-Cutting Units: 2 • UV Drying: Included • Glue: Included • Barcode Printing Capabilities: Supported • Web Turnbar (Turner Bar): Included • Web Cleaning: Included • Roll-to-Sheet Conversion: Included • Unwinder: Included • Rewinder: Included • Chiller: Included

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml Dodpfxon D Ew Ij Agdjul 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) Dedpfx Agok Hz Nqjdoul (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2018, Converting Line GM 330 FB-D (Hot stamping + Screen printing) Year of manufacture: 2018 Manufacturer: Grafisk Maskinfabrik Maximum web width: 350 mm Minimum web width: 50 mm Duodpfxjw I T Uco Agdsl Maximum unwind diameter: 700 mm Maximum rewind diameter: 600 mm - Vetaphone Corona Treater - BST Web Guiding System Hot Foil Stamping Unit (Flatbed) Speed: 6,000 impressions/h or 10-15 m/min Web width: 110 mm - 330 mm Dual foil unwind and rewind with 250 mm diameter Substrates: 50–500 µm Plate thickness: 5-10 mm (7 mm standard) Stamping pressure: 30 tons Foil feed in both transverse and longitudinal direction (rotatable turret) Temperature range: 80° - 130° C Heating time approx. 20 min. Screen Printing Unit Speed: 4,000 cycles/h or 5-15 m/min Web width: 110 mm - 330 mm Frame size: 660 mm x 500 mm Frame type: 30 mm x 30 mm aluminum frame Printing area: 330 mm (length) x 330 mm (width)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Ricoh IP5000 AD3/AD4 128m Counter A: 100 million Dodpfowk Eilex Agdoul Counter B: 80 million Including Hunkeler UW6 and RW6 tight web!! Hunkeler POPP6 Roll2Roll Pictures are available on request...

Condition: used, Year of construction: 2004, functionality: fully functional, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Type of machine: Embossing and die-cutting system / automatic sheet die-cutter Machine number: 400018 Year of manufacture: 2004 Machine specifications Maximum strokes per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Maximum width: approx. 2,400 mm Maximum height: approx. 3,200 mm Maximum height with access window open: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Weight of feeder W4: approx. 3,000 kg Internal closing frame width: 820 x 1,134 mm Maximum die-cutting tool size: 816 x 1,130 mm Maximum die-cutting area: 800 x 1,120 mm with gripper margin Gripper margin adjustable from: Standard 11 – 17 mm with 13 mm wood before 1st knife Option 8 – 14 mm with 10 mm wood before 1st knife Rule height: 23.8 mm Maximum pile height (feeder, incl. pallet): 2,000 mm Maximum pile height (delivery, incl. pallet): 1,700 mm Maximum pile weight (feeder): 1,000 kg Maximum pile weight (delivery): 1,000 kg Maximum rest pile height (feeder): 450 mm Dedpfx Aov T T N Hsgdjul Maximum rest pile weight (feeder): 450 kg Maximum auxiliary pile height (delivery): 200 mm Maximum auxiliary pile weight (delivery): 200 kg Pallet sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Maximum pallet height: 170 mm Drive and electrical supply The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, a pneumatic clutch with spring-loaded brake is installed, which is used to engage and disengage the machine. The motor runs continuously. The control cabinet placed at the machine contains, except for a few devices, all control components for the die-cutter and feeder. Command and indicator devices are located on the machine itself, distributed across the control panels as required. Control cabinet Equipment: Power supply, main switch, fuses, motor protection, PLC control Electrical rating: 3 phase, 400 V AC, 50 Hz, 63 A Control voltage: 24 V DC; 230 V AC; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in excellent condition. A test run can be arranged at any time. Various accessories are included. Patent-protected chain guide rails from QTM have been retrofitted. Price: On request