Workpiece manipulator 10000 kg load capacity

Kabelschlepp

Condition: used, Year of construction: 2005, functionality: fully functional, 630 kVA transformer station, year of manufacture 2005, Bockenem UK1700-30, 630 kVA oil transformer, 20kV±2x2.5%/400 V, AREVA, DCU3834 with HV plug-in bushings AK, LV Pfisterer terminals. Hodpfx Absxzq Dts Teni

Condition: used, functionality: not functional, Year of construction: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the tailgate of the vehicles, which enabled the military to transport a truck or other military equipment. The XV in LARC denotes the maximum payload: 15 tons. The vehicles are made of aluminum and have the following (precise) dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height. (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each delivering 300 HP. On land, the vehicles could reach a maximum speed of 48 km/h and, on water, 9.5 knots, which is approximately 18 km/h. Hnsdpfx Aoxcgy Heb Tei The unladen weight of the vehicle is 22 tons. The maximum permissible weight was 35.5 tons. The previous owner intended to convert the boats to fully electric drive in order to subsequently organize tours on the Wadden Sea. Around €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. The exact remaining work required is not known.

Condition: used, Year of construction: 1994, Technical details: Hnjdsl Su Rxspfx Ab Tei number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at) or *

Condition: excellent (used), Span actual approx. 25,0 m Hnedpfx Asd N D U Djb Toi Jibs fixed leg useable (possible)/ total (possible) max. approx. 18,5 (21,5)/22,0 (25,0) m swing leg useable/total max.approx. 12,5/16,5 m Lifting height under Spreader actual/possible approx. 11,3/14,0 m Construction/reconstruction TAKRAF/TEICHMANN Year of reconstruction 2019

Condition: used, Year of construction: 2008, Technical details: spindle diameter: 200 mm x-travel: 10000 mm y-travel: 4000 mm z-axis: 1500 mm W-axis (spindle longitudinal): 1000 mm bore spindle turning speed range: 1 - 2000 U/min dimension of the ram: 600 x 530 mm Hjdpow S Nn Hefx Ab Toni high speed spindle taper ISO: 60/50 rapid motion - x-axis: 8000 mm/min rapid motion - y-axis: 8000 mm/min rapid traverse Z-axis: 5 m/min total power requirement: 120 kW weight of the machine ca.: 135 t dimensions of the machine ca.: 16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm chip conveyor and coolant attachment *

Year of construction: 1977, condition: used, turning diameter 700-1500 mm clamping length 3000 mm Hedpsuddglsfx Ab Toni guage width 1676 mm Control weight of the machine ca. 60 t Rafamet UBC 150 wheelset lathe for railway wheelsets Serial No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Gauge of the wheelsets to be machined in standard version: 1435mm track widths: 1435mm , 1524mm , 1676mm Length of wheelsets to be machined: 1640-3000mm Running diameter of the wheelset: 700-1500mm Driving diameter: 350-1350mm Width of the wheelset tyre: up to 140mm Fork dimensions of the wheelset lathe_ 8700x360x3250mm Total installed power: 172kW Weight of the machine: 59200kg Speed of the setting movement Lifting and centring device: 2500 mm/min. Headstocks: 1320 mm/min. Quills: 550mm/min. Supports in the longitudinal direction: 1300 mm/min.

Condition: good (used), Year of construction: 2000, total height: 47,000 mm, total width: 27,000 mm, total length: 25,000 mm, table width: 1,000 mm, table length: 1,800 mm, overall weight: 43,000 kg, ram plate width: 600 mm, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Hjdpfxjtiwgis Ab Toni Side passages Ground level installation

Condition: good (used), Vertical Turning Lathe SC33 CNC Manufacturer: TITAN (Romania) YOM: 1986 Complete revision of the machine in 2005 Main technical data: CNC Siemens 802D Faceplate diameter: 3000mm Max. turning diameter: 3300mm Max. working height: 3000mm Max. workpiece weight: 18000kg Table speed range: 1.02-92 RPM Working feed range: 0.05-5 mm/rev. Main motor power: 55 kW Overall dimensions: 5600 x 5300 x 5400 mm Weight: 47350 kg Hnjdjw Eplaepfx Ab Tei The machine is under power.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Ram-Type Floor Type and Milling Machine with SCHARMANN rotary sliding table Brand: SKODA / Type: W200 Basic body constructed in 1986 / 1999 Overhaul / Retrofit on CNC by SKODA. The machine can be inspected by appointment. Technical specifications: Travels: X-axis: 8.000 mm Y axis: 4.150 mm W-axis: 2.000 mm Z-axis: 1.600 mm Spindle: - Spindle diameter: 200 mm - Tool taper to DIN 2080 AD, ISO 60 Hjdjwxyxqjpfx Ab Tsni - Spindle speed: 0,0 to 930 rpm - Drive power spindle: 77 kW Rotary table: - Manufacturer: SCHARMANN - Table surface area: 6.000 x 4.000 mm - V-axis: 2.000 mm - Table load max.: 80 tons - B-axis: 360 ° A, graduation: 0.001 A ° Equipment: - CNC-Control: SIEMENS Sinumerik 840 CE - Chip conveyor - ... There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale. Detailed technical data sheet and information on equipment available on request.

Condition: good (used), Year of construction: 2003, travel distance X-axis: 13,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 30,000 rpm, distance between stands: 6,500 mm, spindle nose: HSK A63, X-axis: 13.000 mm Y-axis: 4.500 mm Z-axis: 1.000 mm Distance between columns: 6.500 mm C-axis: 190º A-axis: 110º Positioning speed XYZ: 15.000 mm/min. Positioning speed AC: 10 tpm CNC Controller: Siemens 840D Spindle nose: HSK A63 Spindle speed: 30.000 rpm Spindle power: 20 kW Toolchanger: 20 Pockets Torrestool tables: 16x X-axis: 11.500 mm Y-axis: 3.500 mm Z-axis: 750 mm Hedpfstt I Sfsx Ab Tsni Country of origin: Spain Machine size LxWxH: 19.000 x 11.000 x 6770 mm Machine weight: 70.000 kg The Torresmill Gantry is a 5-axis CNC milling and drilling machine, specially designed to work on aeronautical materials (Composite, Aluminum, Titanium, Steel, ...). The Torresmill gantry is perfectly combined with the Torrestool universal clamping device, guaranteeing flexibility and process time.