Shrinking equipment

Kallfass Universa

Condition: used, Vollautomatische Seitenschweißmaschine zur Verpackung von Produkten – unabhängig von ihrer Länge – mit Volleinschlag und ohne Folienüberlappung. Mit neuem Querstempel. Fully automatic side sealing machine for packaging products – regardless of their length – with full wrap and without film overlap. With new cross seal bar. Vollautomatische Seitenschweißmaschiene mit Einschweißtunnel - Fully-Automatic Side Sealer Kallfass Universa 400 - Mini 400 Year 2004 - Serial-No. M 05.04.226 Anlage bestehend aus / System consisting of: Handanlage / Hand fed Station MGZ 400 Seitenschweißmaschiene / Fully-Automatic Side Sealer Kallfass Universa 400 Einschweißtunnel / Shrink tunnel Kallfass Mini 400 Technische Daten / Technical Data: Länge Querstempel / Length of cross seal bar 450mm Verpackungsleistung [Takte/min] / Production speed max. up to 85 packs/min Produktlänge / Product length min. 80mm Arbeitshöhe (einstellbar) / Working height (adjustable) 780 mm – 930 mm Pjdpfx Aboz Hwuaj Tsgu Geschwindigkeit des Transportbandes / Speed of transport conveyor, fix: 20 m/min Folie: Halbrundfolie / Film centre-folded film, approx. 12 – 80micron Folienrolle, Kerndurchmesser / Außendurchmesser / Film roll, core diameter / outer diameter approx. 76 mm - max. 400 mm Breite der Folienrolle / Width of film reel max. 600mm Stromversorgung / Power supply 400 volts, 3-phase, 50 Hz, with protective earth conductor Nennkapazität / Rated capacity 3.5 kVA Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic side sealing machine for packaging products – regardless of their length – with full wrapping and without film overlap. The maximum output is 120 cycles/minute. Product feeding is performed via a conveyor belt while simultaneously inserting the product into a center-folded film through a forming shoulder. The infeed conveyor can be easily adjusted for different product widths. The film tube containing the wrapped, aligned products is completely sealed on the side via a side sealing unit. After the product is wrapped with film, transverse sealing is carried out by a continuously heated, follow-along sealing system. The height of the forming shoulder and sealing units is manually adjustable. The remaining film scrap is taken up by a film winder. Wearing parts and defective components have been replaced. Pgjdow E Igvopfx Ab Teu The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing bar: 550 mm Film: center-folded film, approx. 12–80 µm Maximum film roll outer diameter: 400 mm Maximum film roll width: 600 mm Minimum product length: 120 mm Minimum product width: 80 mm Working height: 780–930 mm Tunnel passage width: 450 mm Tunnel passage height: 200 mm Inspection and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Fully automatic flow pack machine for packaging products – regardless of their length – in a full wrap and without film overlap. Product infeed is via a conveyor belt while simultaneously wrapping into a center-folded film using a forming shoulder. Product separation is controlled by a photoelectric sensor. The infeed conveyor can be easily adjusted for different product widths. Longitudinal sealing is achieved by a continuous side sealing device. The height position of the forming shoulder and sealing units is manually adjustable. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Cross sealing bar: 850 mm Film: center-folded film, approx. 12 - 80µm Film roll outer diameter: max. 400 mm Film roll width: max. 900 mm Min. product length: 120 mm Pass-through height: 300 mm Pgsdpoyybuisfx Ab Tou Working height: 780 - 930 mm Power supply: 400 Volt three-phase, 50 Hz with protective conductor Rated output: 3.5 kVA Rated current: 5.1 A Inspection and demonstrations are possible in our facilities by appointment. Functionality guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Fully automatic flow-pack machine for packaging products – regardless of their length – in a fully enclosed manner and without film overlap. The products are fed via a conveyor belt and simultaneously inserted into a half-tube film using a forming shoulder. Product detection is carried out using a light barrier. The feed belt can be easily adjusted to accommodate different product widths. The longitudinal sealing is created by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Worn parts and defective parts have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing stamp: 450 mm Film: Half-tube film, approx. 12 - 80 µm Film roll outer diameter: max. 400 mm Film roll width: max. 600 mm Min. product length: 120 mm Min. product width: 80 mm Passage height: 200 mm Pgsdez A Dfqepfx Ab Teu Working height: 780 - 930 mm Power connection: 400 Volt three-phase, 50 Hz with protective conductor Rated power: 3.5 kVA Rated current: 5.1 A Inspection and demonstrations are possible by arrangement in our premises. Functional guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Fully automatic flow wrapping machine for packaging products—regardless of their length—in a complete wrap without film overlap. Product infeed is carried out via a conveyor belt, while simultaneously being wrapped in centerfold film using a forming shoulder. Product timing is achieved via a photoelectric sensor. The infeed conveyor can be easily adjusted to accommodate different product widths. Longitudinal sealing is produced by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Pedsw Ddb Tspfx Ab Togu Wearing and defective parts have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Technical data: - Cross sealing bar: 450 mm - Film: centerfold film, approx. 12–80 µm - Max. film roll outer diameter: 400 mm - Max. film roll width: 600 mm - Min. product length: 120 mm - Min. product width: 80 mm - Pass-through height: 200 mm - Working height: 780–930 mm - Power supply: 400 Volt three-phase, 50 Hz, with protective earth - Rated power: 3.5 kVA - Rated current: 5.1 A Inspection and demonstration can be arranged by appointment at our premises. Function guarantee, no warranty.

Condition: excellent (used), Year of construction: 1991, Manufacturer: Kalfass Pgsb Aeq Htfnsz Hpn Esr Model Number: Universa8060 Rate 40units/min Productdimensions 750x 500 x 140mm Maximum width 800mm Dimensions Welder2200 x 1400 x 1800 mm - Oven 1750 x 1350 x 1300mm -Mat 1700 x 600 x 1100 mm (band width 400mm) Compact L-sealer with shrink oven Pedpfx Aoq Htfneb Tjgu Created for the demand of industrialapplications The Kallfass 8060/650 compact L-sealers in combination with high-performance shrinktunnels. The qualities of this series of machines becomeevident when Subjected to hard, continuous use.

Condition: used, Year of construction: 1998, Mains connection: 3P + PE, operating voltage: 400V, frequency: 50/60Hz, control voltage: 24V DC, connected load: 3.5kVA, rated current: 4.8A, total current: 4.8A, upstream fuse: 3×16A. The machine is in perfect condition. An on-site inspection is possible. Podpfx Aez Akv Sjb Togu

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: M 09.10.288, product width (max.): 700 mm, product length (min.): 120 mm, input voltage: 400 V, working height: 850 mm, input frequency: 50 Hz, Equipment: documentation/manual, Kallfass Universa 700 – Fully-Automatic Side Sealer + KALLFASS Schrinktunnel COMPAKT650 D Industrial packaging machine for shrink-wrapping larger products such as picture frames, furniture, insulation material and similar goods. Manufactured by Kallfass Verpackungsmaschinen GmbH (Germany), CE certified. Key specs: Max. production speed: up to 65 packs/min Cross seal bar width: 750 mm Pgjdezwld Hjpfx Ab Teu Max. sealing frame height clearance: 300 mm Min. product length: 120 mm Film: centre-folded or flat, 12–80 micron; reel diameter up to 400 mm, width up to 900 mm Permanently heated seal bar with exchangeable sealing ledge, maintenance-free, PLC temperature control Siemens S7 PLC with colour touchscreen operator interface (multi-language) Power: 400V, 50Hz, 3-phase, 3.5 kVA Dimensions: approx. 2500 x 1400 x 2100 mm Colour: Kallfass Anthracite Complete with original technical documentation and CE declaration of conformity.

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Pgsdpoxnzlhefx Ab Tju Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Kallfass Universa 500 with shrinking tunnel from Hugo Beck Kallfass Universa 500, year of manufacture 2011. The system is immediately available. The price of the complete system includes the Universa 400. The machine has been technically overhauled and is in very good condition. Technical data: - Length of transverse sealing bar: 500mm - Sealing bar opening: max. 200mm - Min. product length: 80mm - Automatic length adjustment to reduce the sealing bar gap - Film guide plate, available as an option - Control: Siemens S7-300 - Operator terminal with Siemens TP270 Pjdpezn Up Tefx Ab Tegu - Sealing bar with replaceable sealing element - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2011 - Shrinking tunnel Hugo Beck Transverse and side sealing have been inspected and overhauled. Infeed, outfeed, and transport belts are inspected and replaced if necessary. The machine is available after inspection and repair. Installation of the system is included in Germany, Austria, and Switzerland. Fully automatic flow wrapping machines for packaging products – regardless of their length – in a complete wrap and without film overlap. The product is fed via a conveyor belt and simultaneously inserted into a half-tube film via a forming shoulder. The product is detected by a light barrier. The feed belt can be easily adjusted to different product widths. After the product is wrapped with film, transverse sealing is carried out with a continuously heated sealing system. Longitudinal sealing is created by a continuous side sealing unit. The height of the forming shoulder and the sealing units can be adjusted manually. The remaining strip of film is collected on a film reel. If required, we also offer installation and service for this system or systems from other manufacturers. Subject to prior sale. The price is EXW. No guarantee for technical data.