Forklift

Kalmar DCE 120 -12 Frontstapler

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Hydraulic press brake PPBL 135/30 Year of construction 1990 Technical specifications Force 1350kN Working length 3050mm Distance between uprights 2250mm Stroke 110mm Distance table – ram 310mm Gap 200mm Width table 180mm Approach speed 100mm/s Working speed 8mm/s Gjdpfjw Hca Hsx Abretu Return speed 65mm/s weight 6500 kg motor 7.5kW Voltage 3 x 380V Oil-tank 120L Options inlcuded; • Back gauge with 2 fingers • Range of back gauge 600mm • 2 front supports of 300mm • Table with center slot Tooling included with machine; • R10.180.78. 6x508mm • Multi-V M90 1x3050mm

Year of construction: 2012, condition: excellent (used), Double-head saw with 3 controlled axes for aluminium, PVC, and light alloys, featuring automatic movement of the mobile head and electronic management of all angles from 45° (internal) to 15° (external), with precision up to 280 positions per degree. Gedpoxqdu Dsfx Abretu

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Gsdpfx Absrz Tuterstu Weight 1.7 tons. very good condition

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 47,000 h, laser power: 2,000 W, punching force: 76 t, workpiece weight (max.): 120 kg, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection + MultiTool function + Marking/Fast beading function + Repositioning cylinder + Sensor for part chute Standard features: - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - TCF1 laser (2000W) - HI-LAS high-pressure cutting - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen - USB stick interface - 3.5" floppy disk drive - Safety features - RJ45 network connection - Network connection - Detailed operating instructions - Remote diagnostics system Godswcq Hgopfx Abrstu

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW Gtodpod N H A Njfx Abrsu hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: good (used), Year of construction: 2010, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Haas TR210 5 axis trunnion table Godpoxpw Rvofx Abrstu

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Godpfx Asw Iq Ugebrstu Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: excellent (used), Year of construction: 2008, For sale complete PVC carpentry production line, brand URBAN, composed of: *1. Welding machine at 2 ends; URBAN brand, model: AKS 5305-FF, serial number: 53372, year of manufacture: 2007, perfect working condition; *2. Channel milling machine; URBAN brand, model: WS 103, serial number: 790, year of manufacture 2007, perfect working condition; *3. 2-headed saw: brand RAPID, model DGS 100, serial number: 004606128, year of manufacture 2010, sold together with vacuum cleaner with bags, perfect working condition; *4. MACC rebar cutting saw, model NEW 275, serial number: 88266, year of manufacture 2008, perfect working condition; *5. Pantograph brand URBAN, model MLA A23 – 100466321S, serial number: 528-0, year of manufacture: 2008, perfect working condition; 6. Upright milling machine: URBAN brand, model M7CRH-100149891, serial number 559, year of manufacture 2008, perfect working condition; *7. De burring machine with 2 groups of cutters; brand URBAN, model SV 280, serial number: 29342, year of manufacture 2008, perfect working condition; *8. Saw for cutting sticks: brand URBAN, model GLS 102; serial number: 102015; year of manufacture 2010, perfect working condition; The production capacity of the line is 30-50 units/8h (depending on the number of people serving the line). The line was used very little from 2010 to 2014, and not at maximum capacity. We can also sell individual machines on request from the line. Gjdpjucl Dcefx Abretu Net price complete line 33.500 Euro + VAT, negotiable, FCA Oradea.

Condition: used, Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm Gtodpfx Abjxabutjrju dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 1996, Max. punching force: 55 tons Notching: 10 mm Hole diameter and thickness: 40x10 mm Gtsdpfx Abjwgkq Tsrou Flat steel: 300x15 or 200x20 mm 90° angle steel: 120x120x10 mm 45° angle steel: 70x70x7 mm Bar steel: 40 mm Square steel: 40 mm Strokes per minute with a 20 mm stroke: 37 /min Throat: 250 mm Machine weight: approx. 1,800 kg