Dosing bulk feeder compressor conveying

KEITEL

Condition: ready for operation (used), For sale is a complete log yard with long log feed, Nicholson A6/35'' debarker and Baljer Zembrod OBX V-24 bridge crane with up to 200 meters of rail. Kodpfx Aewxndnsb Tsln

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: Kodowclkyepfx Ab Teln - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: used, Year of construction: 1993, Häwa debarking milling machine H249 / 1000 Year of manufacture: 1993 Log diameter: 0.25 m - 1.2 m Log length: 1.8 m - 7 m Milling head: 30 kW Root reducer: 37 kW Consists of: Kljdpfx Ajx Rv T Isb Tjn - Cross infeed conveyor - Debarking - Conveyor belts - Outfeed conveyor

Condition: excellent (used), functionality: fully functional, Filter for extraction of dust and sawdust. Klsdpfx Abotzld Ue Ton

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Kodowvqkljpfx Ab Tjln Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Year of construction: 1984, condition: excellent (used), Blade diameter: 550 mm Minimum cutting length: 500mm Klodpelrtntofx Ab Ton Minimum cutting width: 100mm Maximum cutting height: 160 mm Minimum cutting height: 40mm Pneumatic clamps

Condition: used, Manufacturer: REWA Type: Solid body auger, with bearings on both sides, Other: without cover, WITHOUT motor and gearbox, with solids pusher Length: 8.00 m Kodjrk Etuspfx Ab Tsln Ø screw: 300 mm

Condition: used, Lenght: 1,5 m Klodpfohhpbcjx Ab Ten Widht: 1,5 m Log scanner Elinova 768.

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs Kjdpfx Asyfgzdjb Tsln 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc OF0435 Hardware dongle for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 820 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,765 mm, fuel type: diesel, mast type: triplex, construction height: 2,910 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 7,760 kg, total length: 3,748 mm, drive type: Diesel, construction width: 2,080 mm, All-terrain forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 60 mm Klsdpfx Aex R Hcmsb Ten ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Technical condition: good Front tire type: Pneumatic Front tire size: AS 340/80 R18 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: AS 18-22.5 163A8 Rear tire condition: 80 - 100% Description: The M 50-4 all-terrain forklift is designed for operations in challenging environments or areas with obstacles. With 4-wheel drive and a ground clearance of 43 cm, this forklift ensures optimal maneuverability under all conditions. A wide range of tire options is available for adaptation to varied surfaces, optimizing your productivity. The pendulum-mounted cab, accessible from both sides, offers a spacious driver’s area with ergonomic controls. The elevated driving position provides a 360° panoramic view for enhanced safety for both operator and surroundings. Side shift, 3rd and 4th hydraulic valve, work lights (front/rear), cabin heater, full cab, CE certificate. Includes: service booklet, EC declaration of conformity, operator’s manual, spare parts manual.