Converter folding piece

Knapp NB425

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy. Fodpfx Ahedrtalsnoph

Condition: used, made by Knapp tape length: 8900 mm travel speed: 30 meters/minute height adjustable, currently 800 mm Fedpfxjuf S A Rs Ahnjph tape width: 280 mm channel width: 320 mm total width: 380 mm tape material: rubber fabric, minimally ribbed in the longitudinal direction. frame powder-coated steel drive: Geared electric motor Sew-Eurodrive power: 0.37 kw 50Hz 400v

Condition: used, type of input current: AC, protection type (IP code): IP22, power: 132 kW (179.47 HP), Equipment: type plate available, Exact type designation: ABB ACS607-0170-3 Output power and output current: 132kW | 260A ° With TEST SEAL! ° Easy to use thanks to the integrated control panel ° Original operating instructions for commissioning included Only 1 more in stock! Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready to use. Fpsdpfxorakqms Ahnoh

Condition: good (used), We have a large number of used conveyor belts for sale. Belt width: 500 mm Total width: 620 mm Manufacturer: Vanderlande Fpjdpfxeiyp H Ue Ahnoh Price per linear meter: €300 Drive module: €1,500 Please contact us if you are interested. Other dimensions are available. Please inquire.

Condition: new, functionality: fully functional, machine/vehicle number: V00002674023, input current: 272 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP54, year of last overhaul: 2025, power: 250 kW (339.91 HP), Equipment: type plate available, Exact type designation: Vacon 0100-3L-0261-7-ED-FLOW+SEBJ+IP54+EMC4+LS60+CAPU+CAPD+CDLP+CACH+C AMH+CPS0+EMAR+GNUL+GADN INPUT: Uin:3~AC,525-690V, 50/60Hz, 272A OUTPUT: 3~AC, 0-Uin, 0-320Hz, 261A POWER: 250kW:690V / 250HP:600V ° NEW in original packaging! ° Formed! ° Easy to use thanks to the integrated control panel ° Quick parameterization possible thanks to the Quick Menu Fpodporwznisfx Ahnjh ° Original operating instructions for commissioning included Only 1 more in stock!

Condition: good (used), functionality: fully functional, Year of construction: 2018, load capacity: 15,000 kg, ABUS 15-Ton Double Girder Overhead Crane – Including 120m Rails – Year 2018 / Installed 2021 For sale: a very well-maintained ABUS double girder overhead crane system with a lifting capacity of 15 tons, including approximately 120 meters of runway rails. The crane was installed in our injection molding facility in Leipheim, Germany, and has seen only limited operational use. It was primarily used for handling and changing molds in plastics injection molding production. Due to the closure of the factory, the complete crane installation is now available for sale. Technical Specifications Brand: ABUS Type: ABUS ZLK Double Girder Overhead Crane Lifting capacity: 15 tons Span width: 19,944 mm Year of manufacture: 2018 Installed / commissioned: 2021 Fpodpfx Ahey Uk Dienoh Crane classification: H2/B3 Power supply: 400V / 230V – 50 Hz Travel speed: 10 / 40 m/min Protection class: IP55 Total connected load: 18 kW Includes: Overhead crane Hoist Approx. 120 meters of rails/runway system Features - Double girder, heavy-duty industrial design - Very good technical and cosmetic condition - Low operating hours Important Information - Installed in our factory in Leipheim, Germany - Used only for mold handling in injection molding production - Factory closure sale - Disassembly and removal must be arranged by the buyer (assistance from a local team can be provided) - Inspection possible by appointment - Available immediately An excellent opportunity for production facilities, mold shops, heavy industry, or warehouse operations looking for a modern, heavy-duty crane installation in excellent condition.

Year of construction: 2009, condition: used, machine/vehicle number: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 PROFILSTAHL SÄGE-BOHRMASCHINE The Kaltenbach KBS 1010 DG - KDX-S 1015 saw-drill line combination consists of a CNC-controlled Kaltenbach KBS 1010 DG band saw and a Kaltenbach KDX-S 1015 drill line. This drilling saw line is ideally suited for economical sawing, drilling, center punching, marking (scribing) and thread cutting of profiles and flat steel bars in steel construction and the steel trade. The Kaltenbach KDX-S drilling machine is equipped with 3 drilling units, each with 26 kW drive power and 5 tool changers. The Kaltenbach M150 length measuring device (measuring carriage) together with the T13 transport system is designed for profile lengths of up to 18 m. The comprehensive transport system for the material transport of sectional steel also has cross tractors at the infeed and outfeed for the cross transport of the sections. The CNC control together with the Kaltenbach Profiline III software enables data processing in DSTV and DXF format. The entire system has an ergonomic working height of 640 mm from the material level to the top edge of the floor, giving the operator a good overview. A gripper downstream of the saw is used to remove and eject the first cut or transport the profile to the outfeed area. The Kaltenbach KBS 1010 DG - KDX-S 1015 saw drill line combination consists of: Fpedpfjymy Imox Ahneh Kaltenbach KDX-S 1015 PROFILE DRILLING SYSTEM CUTTING BAND SAW MACHINE Kaltenbach KBS 1010 DG MACHINE CONTROL Kaltenbach Profiline III LENGTH MEASURING DEVICE Kaltenbach M 150 TRANSPORT SYSTEM Kaltenbach T13

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Fpedpjyak Anjfx Ahnoh Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h Fpsdpfx Ahjua Eu Neneh

Year of construction: 2009, condition: excellent (used), Several pieces of Knapp conveyor belt and application belt are for sale in several sizes It can be used in a Z shape (as an application tape) and straight. Manufacturer: Knapp Belt length: 4870 mm (470 + 3700 + 700 mm) Travel speed: 30 meters/minute Fodpfxol Dw U Se Ahneph Height adjustable Belt width: 280 mm Channel width: 320 mm Total width: 380 mm Tape material: rubber fabric, minimally ribbed in the longitudinal direction. Frame: powder-coated steel Drive: Geared electric motor Sew-Eurodrive Electric power: 0.37kw, 50Hz, 400V The indicated price applies to one piece.