Pallet conveyor / roller conveyor + drive

Langhammer

Condition: used, Year of construction: 2010, functionality: fully functional, Robotic palletizing system from W+D Langhammer, manufactured in 2010, featuring an ABB IRB 660 M2004 palletizing robot, ABB IRC5 M2004 controller, conveyor system, and safety enclosure. System manufacturer: W+D Langhammer GmbH System type: Robotic palletizing Year of manufacture: 2010 Factory number: A1005300-146900 Robot manufacturer: ABB Robot type: IRB 660 M2004 Robot variant: IRB 660-180/3.15 Robot manufacturing date: 07/30/2010 Robot serial number: 66Z-63572 Ibjdpfsz Dnu Esx Ap Dsc Robot net weight: 1,750 kg Load capacity according to robot variant: 180 kg Reach according to robot variant: 3.15 m Robot controller: ABB IRC5 M2004 Version: 144A 400–480V Controller voltage: 3 × 400 V Frequency: 50–60 Hz Rated current: 20 A Short-circuit current: 6.5 kA at 400 V Controller net weight: 150 kg Controller manufacturing date: 08/02/2010 Robot operating device: ABB Teach Pendant System operation: Siemens SIMATIC Multi Panel Gripping system: Palletizing gripper included Conveyor system: Roller conveyors and infeed belts Safety enclosure: approx. 8 × 8 m Infeed belts: 2 units, each protruding approx. 1 m from the safety enclosure Outfeed roller conveyors: protruding approx. 2 m from the safety enclosure Langhammer system voltage: 3 × 400 V N PE Langhammer system frequency: 50 Hz Full load current: 35 A Short-circuit breaker: 50 A Note: The infeed and outfeed belt marked in the layout below with a red diagonal line is not installed and is not part of the system offered.

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system Ijdpfx Apsdt Rgvj Dsbc VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: used, Conveyor length: 2400 mm Discharge length: 300 mm Belt width: 200 mm Conveyor angle (approx.): 38° Space requirement (L x W): 2750 x 400 mm Ijdpfx Apeb Nwd Ro Dsbc Weight: 115 kg

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST Ibedpfexacilox Ap Djc shaft length 140 mm roll diameter 62.0 mm throat 100 mm total power requirement manuell kW weight of the machine ca. 50.0 kg dimensions of the machine ca. 560 x 220 x 500 mm Display machine - like new Never been used (!!) Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft

Condition: used, Crossbars: 2700*110/130*50 mm 800 kg/pallet Frames: 3000*1100 mm 7900*1100*120 mm If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Additional accessories available, such as: Frame, corner, and end protectors, push-through guards, chipboard, grating, rear panel grating, and deep shelf supports. Iedpog Tmvhjfx Ap Dobc Shipping: Please inquire about shipping costs, providing your postal code, city, and the desired quantity of items. Additional service offerings: Planning, shelving assembly/disassembly, buying/selling. Changes and errors in technical data, information, and prices, as well as sales subject to change!

Condition: new, Year of construction: 2026, The item is generally a project-based product or, depending on availability, available as a demonstration machine. The purpose of the labeller is to fully automatically label a cylindrical product. Description - Machine materials: 1.4301 and anodised aluminium alloy - Control via Siemens PLC + HMI - Cylindrical products from Ø20mm to Ø110mm - Accuracy: ± 1 mm (excluding product and label faults) - Technical documentation provided via regional partners Label roll - Inner diameter: 76 mm Isdpfx Apeq U Sihs Dobc - Outer diameter:

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New machine, immediately available, 12 months warranty -Internal dimensions (w x d x h): 1250 x 4000 x 1450 mm -External dimensions (w x d x h): 1900 x 4900 x 2500 mm -Power consumption: 240 kW -Current consumption: 350 Amperes -Maximum temperature: 1300 °C -Oven weight (approx.): 6000 kg -Control system: JUMO IMAGO 500 -Software packages: (OPCA & PCC) -Display unit: JUMO Logoscreen 601 -Includes: feedthrough hole and 6 additional slots for recording type K customer thermocouples -Multi-zone design (3 zones) -Switchgear with solid-state relays -Climate control for the switchgear -Automatic inlet and outlet dampers Ibedpsy Avmlsfx Ap Doc -Controlled cooling system (including frequency converter, controlled via the control system) -Electrically driven furnace car -Maximum load: 3.5 tons -Swinging door -Documentation, CE declaration We would be happy to offer installation, commissioning, and training for your employees. Please contact us! We stock new and used industrial furnaces. Inspections in our warehouse are possible upon request. Furnace car oven, car hearth oven, furnaces, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, oven, stress-relieving furnace, enamelling furnace, drying oven, industrial furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Isdpfx Apsxlngao Dobc Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Ijden Htktspfx Ap Djbc

Year of construction: 2026, condition: new, Oscillating screen ASM series S&F oscillating screens and horizontal screens are used in many areas of the wood processing industry (sawmills, pelleting plants). Screening machines of the "ASM" series screen wood chips, wood pellets, sawdust and sawdust, waste wood, biomass and many other sawmill by-products in dry and wet applications. The material-protecting, horizontal-circular screening movement of the inclined screen box ensures a high separation efficiency of the vibrating screen. One advantage of the screening machine is that long and fibrous particles glide diagonally to tangentially over the screening surface. This means that - in contrast to throw screens - no jamming or plugging grain occurs. Further advantages are the robust design, the high screening capacity and the long, low-maintenance running time of the screening machine. In addition to standard dimensions, the company also supplies the "ASM" series as a "customising solution" in a split design for existing plants. This makes it possible to use new screening machines in cramped and difficult-to-access spaces in existing plants or sawmills. Screening machines of the "ASM" series offer screen sizes from 0.5 to 15 m² (per screen deck) and are characterised by a high screening capacity (up to 350 m³/h - depending on the material). At a glance: - Ideal for: Wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuel. - Areas of application: Wood industry, recycling and waste disposal, animal feed - Screening area: 0.5 - 15 m² (30 m² as double deck) - Screening capacity (depending on material): up to 350 m³/h - Separation size: 0.1 - 150 mm (depending on size) - Drive power: 0.55 - 15.0 kW (depending on size) Advantages: - High screening capacity - High separation efficiency Ijdein Ey Sepfx Ap Dsbc - No jamming and plugging - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.