Vertical Lift

LTG-TOWERMAX L 70.0-331-2448-816-6210

Condition: reconditioned (used), Modernized machines with the new LTG StoreControl L control system External dimensions: Height 6,000 mm Width 1,630 mm Depth 2,980 mm 30 beams, each with a payload of 500 kg with the clear usable dimensions: W = 1,300 mm Ledpfx Agsn D A Rrjzeak D = 863 mm H from 50 to 750 mm Total payload up to 40,000 kg Start of the access opening at 870 mm above the top floor, then 845 mm high Color: GRAY/BLUE, beams sendzimier-galvanized Surface cleaned, signs of wear possible Performance values Vertical drive 1 x 2.2 kW / 400 volts Horizontal drive 1 x 0.29 kW / 400 volts More Extras: Hand-operated lift door Subject to errors, technical changes, and deviations from photos. Delivery and installation currently primarily in Germany, Austria, and other neighboring countries.

Condition: new, AVAILABLE EX STOCK ! Subject to prior sale. Lajdpfxsd Ixbzj Agzek OD tube deburring machines clean and remove sharp edges on tubes and profiles caused by sawing. Enables simultaneous outside and inside burrs removal without rotating the tube. Deburrs round, square, rectangular and many different tube and profile shapes deburring in few seconds.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Lodpfxed Spf Rs Agzeak Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: used, Roller diameter: 800 mm Max. cutting height: 440 mm Max. cutting width: 785 mm Table height: 970 mm Table dimensions: 1170 x 800 mm Blade width: 40 x 7/10 mm Blade length: 5630 mm Extraction diameter: 120 mm Dimensions: 1625 x 940 x 2516 mm Weight: 770 kg Storage location: Nattheim Lasdpfx Agjwayzbozek

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines undergo thorough inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request Laedpfx Aopy Eldegzok - We are happy to handle shipping and/or installation

Condition: new, The Cedes Safe C200 Can height detection, object protection, safety evaluation device assembly has been discontinued by the manufacturer and can therefore no longer be procured. Therefore we already have developed a replacement control for these devices, which ensures continued overdoing for years. In this context, we provide spare parts, e.g. the Cedes Safe C200 Can is available for immediate repair by our technicians, on loan and free of charge, until the device control is replaced. Lajdpfx Aeiwc Rljgzek This means that the vertical-lift can be used continuously and the control exchange can be planned. Of course we can repair and modernize any other dynamic storage systems as well. Do not hesitate to ask for an offer !!!

Condition: excellent (used), Year of construction: 2023, Mobile 3D coordinate measuring machine Camera, hand probe with display Ljdpou S Rnlefx Agzeak Max. Measuring length 10000/3500/3500 mm Certified measuring range 3000/1500/1500 mm Triple camera Integrated measuring probe camera Measuring accuracy ±(28 + 5 L/1000) μm* Repeatability ±10 μm* Accessories

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Lodpfx Agjh Ha Ipezsak Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Lajdpowq Dpqefx Agzjk Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Year of construction: 1988, condition: used, weight max. in kg 6000 kg fork length 1900 mm 89% serial number GEF 2240 Lsdpfxerxxbts Agzoak height of stroke 3300 mm weight of the machine ca. 9650 t