Hall construction with 2× 10T cranes

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 71257, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gjdpezhuylofx Ambeud Measuring volume: 3,000 mm Accuracy: 0.07 mm MACHINE DETAILS Dimensions & Weight Installation dimensions L x W x H: 1,000 x 500 x 1,000 Weight: 30 kg SCOPE OF DELIVERY Laptop and software (completeness not guaranteed) Transport case Note: The red base on which the laptop is placed is not included in the offer.

Condition: excellent (used), Year of construction: 2008, overall weight: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Godpexmf R Sefx Amboud Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Little used / Under power / Direct availebel Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: F3S171901, table width: 180 mm, table length: 600 mm, coolant tank capacity: 30 l, pump capacity: 15 l/min, TECHNICAL DETAILS Clamping table dimensions: 600 x 180 mm Tool holder: SK30 Drawbar: M12 x 220 mm T-slots: similar to DIN 650 MACHINE DETAILS Coolant tank: 30 l Guedpfx Amozhm Afjbed Delivery rate: 15 l/min Saddle adjustment: handwheels Spindle drive: 2-pole motor via multi-ribbed belt EQUIPMENT Arbor clamping Cooling system with 30-liter tank Coolant tank with quick-release fastener Control panel Work light Coolant hose CE marking

Condition: ready for operation (used), Year of construction: 2006, operating hours: 5,366 h, functionality: fully functional, machine/vehicle number: 11415551674, controller model: Heidenhain i TNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, table diameter: 600 mm, TECHNICAL DETAILS Spindle speed: 10,000 rpm Gusdpfx Amozhmw Asbsd Table diameter: 600 mm Number of tool changer positions: 16 Tool system: SK40 MACHINE DETAILS Control model: Heidenhain i TNC 530 Dimensions & Weight Dimensions (L x W x H): 2,200 x 2,000 x 2,100 mm Weight: approx. 4 t Operating hours, control system on: 24,237 h Operating hours, automatic mode: 5,366 h

Condition: excellent (used), Year of construction: 2020, YEAR 2020 MODEL: TD 150 MAXIMUM CAPACITY: 1.50 mm (400 N/mm²) WORKING LENGTHS: 6.4 m DEPTH OF NOTCH: 1250 mm WIDTH OF BENDING BLADE: 10 mm + additional guide 10 mm Gsdjzcm Dmopfx Amboud MAXIMUM BENDING ANGLE: 143° BENDING ACCURACY: ± 0.5°

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 11065357454, spindle speed (max.): 6,000 rpm, control type: CNC control, number of axes: 3, TECHNICAL DETAILS Pallet size: 400 mm Spindle speed: 6,000 rpm Guodpfxozhmvlj Ambjd Tool holder: SK40 MACHINE DETAILS Control type: CNC controlled Number of axes: 3 EQUIPMENT Tool change: manual

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06010056, total height: 1,620 mm, total width: 910 mm, total length: 980 mm, A coordinate measuring machine manufactured by Tesa, model: Micro-hite 3D, will be auctioned. MACHINE DETAILS Gsdpfszhmq Njx Ambsud Overall length: 980 mm Overall width: 910 mm Overall height: 1,620 mm Installation date: March 24, 2006

Condition: excellent (used), Year of construction: 2014, operating hours: 8,900 h, machine/vehicle number: LP50VH2, 1) Technical specifications Press with conveyor Technical data baler: Manufacturer Presona Typ LP 50 VH2 Guodpfoyrhi Nox Ambsd Year of construction 2014 Press power main press 50 tons Specific press force 63 N/cm2 Feed channel 1,500 x 1,100 mm Filling volume 2,7 m3 Theoretic throughput capacity 730 m3/hour Throughput capacity under operating conditions 340 m3/hour Bale size 1,100 x 720 mm, lenght variable Drive power 45 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a • bulk weight of 30 kg/cbm 8 up to 10 tons/hour • bulk weight of 50 kg/cbm 11 up to 13 tons/hour • bulk weight of 100 kg/cbm 15 up to 22 tons/hour Bale density (paper, newspaper) 400 up to 550 kg/m3 Filling volume hydraulic oil tank 600 l Weight baler 16 tons netto Scope of delivery: Press, electrical cabinet, control panel, chain conveyor The documentation (operating manual, CE declaration, electrical/hydraulic diagram) is complete. Visiting is possible by appointment. We are not responsible for technical information or any errors. Upon request, we can send video materials of the working press

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,831 h, functionality: fully functional, machine/vehicle number: 15465588584, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller model: Heidenhain iTNC 530 HSCI, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 400 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 375 mm B-axis: -5 to +110 degrees C-axis: 360 degrees Table dimensions: 450 x 400 mm Maximum workpiece weight: 250 kg Spindle speed: 18,000 rpm Tool interface: HSK-A63 Number of tool positions: 60 Rapid traverse rate: 80 m/min MACHINE DETAILS Control system: Heidenhain iTNC 530 HSCI Machine weight (approx.): 7,150 kg Gjdpfjzgt U Eex Ambsud Operating hours Spindle hours: 23,831 h Power-on hours: 57,330 h EQUIPMENT Band filter system NC rotary table Handwheel FS Coolant gun Tool measurement system Chip conveyor Rotoclear viewing window Temperature monitoring

Condition: ready for operation (used), Year of construction: 2010, operating hours: 10,106 h, functionality: fully functional, machine/vehicle number: 107.86.00.246, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 500 mm Spindle speed: 24,000 rpm Table dimensions: 900 x 630 mm Number of axes: 3 Guodpfx Aezgt Ulembed MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,550 x 2,900 mm Machine weight: 8,300 kg Connection: 400 V Operating hours Operating hours, control system: 58,372 h Operating hours, machine: 26,800 h Programmed hours: 10,106 h

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Gedpfx Amotvau Aebjud Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, The machine was manufactured in 2011, but it was not put into operation and modernized until 2016. As part of this process, an electrical update for the WorkPartner automation system was carried out! TECHNICAL DETAILS Workpiece weight max.: 200 kg Travel range X-axis: 1,800 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 1,100 mm Godpfx Amszf E Nxsbjud Workpiece height max.: 250 mm Workpiece width max.: 750 mm Workpiece length max.: 550 mm Feed length X-axis: 350 mm Feed length Y-axis: 250 mm Feed length Z-axis: 256 mm MACHINE DETAILS Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,760 x 2,455 mm Total weight: 3,700 kg EQUIPMENT Documentation/Manual Cooling unit Note: The operating hours of the machine can be found in the last image.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 26,897 h, functionality: fully functional, machine/vehicle number: 107.84.01.011, travel distance X-axis: 400 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 350 mm, controller model: Heidenhain TNC 430 M, spindle speed (max.): 42,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 400 mm Travel range, Y-axis: 240 mm Travel range, Z-axis: 350 mm Feed rate (X/Y/Z-axis): 40 m/min Axis acceleration (X/Y/Z-axis): 10 m/s² Spindle speed max.: 42,000 rpm Spindle torque (40% duty cycle): 4.25 Nm Spindle torque (100% duty cycle): 3.2 Nm Feed rate, B-axis max.: 54,000 °/min Feed rate, C-axis max.: 90,000 °/min Tool interface: HSK-E40 Tool magazine: 18/36/68 tools Tool change time: approx. 10 s Chip-to-chip time: approx. 12.5 s Gsdpfx Amszf E I Ujboud Erowa UPC pallet system (L x W): 320 x 320 mm Workpiece weight max.: 200 kg MACHINE DETAILS Control model: Heidenhain TNC 430 M Spindle power (40% duty cycle): 13 kW Spindle power (100% duty cycle): 10 kW Spindle operating hours: 26,897 h Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,400 x 2,800 mm Total weight: 6,500 kg EQUIPMENT STEP-TEC spindle, type HVC140-SB-10-15/42-3F-HSK-E40 Erowa UPC pallet system

Condition: new, Year of construction: 2025, Dürkopp Adler 867-190142-M – New – Direct Drive – Direct from Stock – €6,000 excl. VAT For sale: brand new Dürkopp Adler 867-190142-M, available immediately from stock. ✔ New / unused ✔ Equipped with M-TYPE direct drive motor – quiet, powerful, and energy-efficient ✔ Triple transport (lower, upper, and needle feed) for perfect material guidance ✔ Ideal for leather, upholstery, automotive interiors, and heavy materials ✔ Reliable top-quality German engineering from Dürkopp Adler ✔ Ready for immediate use in workshops or production Special price for quick sale: €6,000 excl. VAT First come, first served – available immediately Serious interest? Send a message to arrange a viewing or delivery. Quick buyers can expect fast handling and priority service. For more information or to arrange a viewing, feel free to send a message. Keywords: industrial sewing machine for sale industrial sewing machine wholesale sewing machine supplier professional sewing machines Gusdpfxorni Sne Ambsd industrial sewing machine used industrial sewing machine sewing machines for businesses

Condition: ready for operation (used), Year of construction: 2018, operating hours: 4,231 h, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, overall weight: 11,000 kg, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm C-axis swivel range: 360° Tool interface: HSK-E63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Gusdpozf E I Isfx Ambed Spindle types: NCD 150 PL, NCD 200 PL Operating hours, control ON: 30,064 h Operating hours, machine ON: 10,322 h Operating hours, program execution: 4,159 h Operating hours, drives ON: 7,331 h Operating hours, spindle ON: 4,231 h Dimensions & Weight Dimensions (L x W x H): 3,400 x 3,000 x 2,800 mm Total weight: 11,000 kg EQUIPMENT Chip conveyor Coolant system with filter system Documentation available