250 Shelf racks Stacking racks

ONO plus VAT

€159

Condition

New

Location

Aumühle

Machine data

Machine type:: 250 Shelf racks Stacking racks

Condition:: new

Price & Location

ONO plus VAT

€159

Location:: Aumühle 16, 4075 Aumühle, Österreich

Call

Details about the offer

Listing ID:: A17228302

Reference number:: P10239

Update:: 24.07.2026

Description

250 Pallet racks, stacking racks, transport racks

New goods, very good condition, see pictures

Dimensions: 1545 x 1185 x 310 mm
Hot-dip galvanized
Stackable
Max. load capacity: 2000 kg
Hsdpfx Acouq Eurj Tsr
Weight: 34 kg (base frame without tubes)

Negotiable price: €159.00 net ex warehouse

Base frame without tubes: €159.00 net ex warehouse
Base frame incl. tubes 100 cm: €227.00 net ex warehouse
Base frame incl. tubes 150 cm: €255.00 net ex warehouse
Base frame incl. tubes 200 cm: €275.00 net ex warehouse

Goods are in stock.
Transport and assembly possible upon request.
Inspection possible at any time by appointment.
Further information upon request.

Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock.

Lenox Trading – Top warehouse technology & heavy-duty racking, used & new
Description:
Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland).
⚡ IMMEDIATELY AVAILABLE:
• Over 10,000 linear meters of racking immediately available
• 20,000 m² of storage platforms & steel platforms immediately available
• Weekly, 30-50 semi-trailer trucks of goods turnover for maximum selection
📦 OUR RANGE (BUY CHEAP ONLINE):
Whether pallet racking, heavy-duty racking, high-bay racking, shelf racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly, and assembly.
🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION:
• SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300)
• Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich)
• Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420
• Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra)
• Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner
🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION
For dismantling and clearance orders, we offer a complete, all-round package:
1. Lump-sum purchase: Purchase of merchandise, equipment & entire warehouse stocks including complete clearance.
2. Commission-based auction: Conducting auctions on behalf of others.
Our full service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and complete clearance.
Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems, we guarantee the best conditions. Contact us for a non-binding offer!

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2010

196 listings online

Call

Send inquiry

Telephone & Fax

+43 7272 ... show

These listings may also fit your interest.

Auction

Област София

9,223 km

Machining center
RapidMFC EVOLUTION II

€8,400

To the auction

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Hodpozln D Ejfx Ac Tsr Pneumatic line pressure at 70 °C: Approx. 15 bar EQUIPMENT Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles.

See details

Listing

Various conveyor belts Förderband Transportband / Conveyor Belt Förderband Transportband / Conveyor Belt

Wartenberg

8,142 km

Various conveyor belts
Förderband Transportband / Conveyor BeltFörderband Transportband / Conveyor Belt

Call

Condition: used, No. 10019 Various conveyor belts Used Consisting of 6 positions Pos. 1: Blue conveyor belt, approx. 8000 x 800 mm LW, was used for waste Pos. 2: Orange conveyor belt, approx. 12000 x 1200 mm LW, as good as new Pos. 4: Two blue mobile conveyor belts, each approx. 10000 x 800 mm LW Pos. 5: Two turquoise conveyor belts, 1st belt approx. 10000 x 1600 mm LW, 2nd belt approx. 4500 x 1400 mm LW, very solid - with sheet metal floor, new motor and gearbox required Pos. 6: Blue Westeria conveyor belt, approx. 14000 x 1200 mm LW Pos. 8: Green mobile Z conveyor belt, approx. 7000 x 500 mm LW, new belt, as good as new Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Hjdjwhp H Njpfx Ac Tjr Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

See details

Auction

Cutting and processing center Rapid Optima VI

Област София

9,223 km

Cutting and processing center
RapidOptima VI

€11,200

To the auction

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Hedpfxjzlnxis Ac Tsr Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

See details

Auction

Cutting and processing center Elumatec SBZ 608

Област София

9,223 km

Cutting and processing center
ElumatecSBZ 608

€10,000

To the auction

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, power: 14 kW (19.03 HP), input current: 80 A, workpiece length (max.): 4,000 mm, machine/vehicle number: 6080008129, TECHNICAL DETAILS Maximum profile width: 130 mm Maximum profile height: 205 mm Maximum workpiece/profile length: 4,000 mm Processing capacity: 80 units Hedpfx Acezlnvus Tsr MACHINE DETAILS Connection: 3 N/PE 400 V Frequency: 50 Hz Current: 80 A Power: 14 kW EQUIPMENT Powered, continuously adjustable gripper Lifting function for smooth feeding Profile guidance on rollers Internal gripper to prevent damage to the profiles Integrated measuring sensors for workpiece length control Workpiece removal via outfeed table Portal design for high profile cross-sections Industrial PC with Windows operating system Barcode scanner

See details

Listing

Single-shaft shredder Vecoplan VAZ 1800 F

Świebodzin

8,076 km

Single-shaft shredder
VecoplanVAZ 1800 F

Call

Condition: refurbished (used), Year of construction: 2010, operating hours: 34,616 h, functionality: fully functional, machine/vehicle number: 1244801, overall weight: 13,500 kg, rotor diameter: 500 mm, number of blades: 125, rotor length: 1,800 mm, type of input current: AC, sieve perforation: 30 mm, VECOPLAN Type VAZ 1800F shredder, after complete renovation, ready to work. The machine is fully functional, the following parts have been replaced: cutting system (knife bases, knives, counter knives, rotor surfacing), vibration isolators, sliding strips, sieve, oils in gears, electrical, hydraulic and pneumatic installations. Hjdpfx Asvx Rtaec Tor

See details

Auction

Front loader forklift Jungheinrich TFG S80GE 360ZT

Schleswig-Holstein

7,667 km

Front loader forklift
JungheinrichTFG S80GE 360ZT

€15,500

To the auction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,125 h, load capacity: 8,000 kg, lifting height: 3,600 mm, mast type: duplex, fork length: 2,050 mm, overall weight: 13,948 kg, An oil change was performed before the sale. Only the hydraulic oil was not changed. The filters have been replaced. TECHNICAL DETAILS Load capacity: 8,000 kg with load center at 900 mm Residual load capacity with Kaup 10T160 fork positioner: 7,320 kg with load center at 900 mm Tractive force with/without load: 45.6 kN Lifting height: approx. 3,600 mm Fork length: approx. 2,050 mm MACHINE DETAILS Engine: LPG GM 5.7L V8 Cylinders: 8 Displacement: 5,700 cm³ Rated speed: 2,200 rpm Power: 85 kW Operating hours according to display: approx. 4,125 h Operation: Solo-Pilot with multi-function display Dimensions & Weight Overall length including forks: approx. 5,950 mm Overall width: approx. 2,150 mm Height with mast retracted: approx. 3,160 mm Height with mast extended: approx. 4,960 mm Height above protective roof: approx. 2,705 mm Self-weight: approx. 13,948 kg EQUIPMENT Kaup 10T160 fork positioner Duplex mast 3rd + 4th control circuit Side shifter Solo-Pilot Single pedal control Work lights front and rear Full cabin with heater Hjdpfozlhnqjx Ac Tor Note: The two tires on the steering axle, as well as the fork tines, should be replaced. This can be requested and carried out by the seller. Fork tine length would be selectable.

See details

Auction

Laser cutting machine TRUMPF TruLaser 5030 classic

Dravograd

8,449 km

Laser cutting machine
TRUMPFTruLaser 5030 classic

€4,500

To the auction

Condition: used, Year of construction: 2007, operating hours: 39,023 h, machine/vehicle number: 1315318, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 900 kg, No minimum price – guaranteed sale to the highest bidder! The machine has not been powered on for approximately one year. TECHNICAL DETAILS Laser power: 5,000 W Working area (X x Y x Z): 3,000 mm x 1,500 mm x 115 mm Sheet metal thickness, structural steel max.: 25 mm Sheet metal thickness, stainless steel max.: 20 mm Sheet metal thickness, aluminum max.: 12 mm Maximum workpiece weight: 900 kg Positioning speed max.: 300 m/min Positioning accuracy: +/- 0.1 mm Hodpfx Aozlhcnsc Tsr MACHINE DETAILS Control system: CNC Siemens Sinumerik 840 D Operating hours, laser on: 77,107 h Operating hours, beam on: 39,023 h Dimensions & Weight Machine dimensions (L x W x H): 11,100 mm x 4,600 mm x 2,400 mm Machine weight: 12,000 kg EQUIPMENT Automatic pallet changer NitroLine FocusLine PlasmaLine SprintLine ContourLine

See details

Listing

Radial drilling machine MK5, boring mill, upright drilling machine, radial arm drilling machine, col CSEPEL RFh 75 / 1500

Hessisch Lichtenau

7,826 km

Radial drilling machine MK5, boring mill, upright drilling machine, radial arm drilling machine, col
CSEPELRFh 75 / 1500

€5,800

Fixed price plus VAT

Call

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment Hsdpfolhwr Rox Ac Tjr - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

See details

Auction

Groningen

7,504 km

4-axis CNC machine
ElumatecSBZ 140

€17,500

To the auction

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Hodpfxszhuyfj Ac Tsr Automatic profile length measurement (on both sides) Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks

See details

Auction

Universal machining center DECKEL MAHO DMU 80 monoBlock

Baden-Württemberg

7,992 km

Universal machining center
DECKEL MAHODMU 80 monoBlock

€15,500

To the auction

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,729 h, functionality: fully functional, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 980 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Spindle speed range: 0–18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Hodpfx Acozmry Ts Ter Control system: Heidenhain iTNC 530 Clamping area: 1,250 × 700 mm Operating hours Machine operating hours: 46,922 h Program runtime: 20,279 h Spindle operating hours: 20,746 h EQUIPMENT Fixed angular table 3D measuring probe Heidenhain Tool measurement in the working area with BLUM laser Vertical tool changer with 32 magazine slots Full protective enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 and 4 Chip conveyor Coolant system 3 height-adjustable machine feet Spindle cooler Control cabinet cooler from Rittal Operating manuals

See details

Listing

Modugno

8,951 km

Truck crane
CASSA SCARRABILE BOB ITALEV

Call

Auction

Vertical machining center BRIDGEPORT VMC 800

Baden-Württemberg

7,992 km

Vertical machining center
BRIDGEPORTVMC 800

€9,000

To the auction

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 500 mm Travel range Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant system with enhanced pump Hjdpszmryyefx Ac Tor Coolant pressure: 20 bar Chip conveyor Operating manual

See details

Auction

Baden-Württemberg

7,992 km

Machining center
MIKRONVCP 800 W

€9,500

To the auction

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,377 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm Speed range: 0–20,000 rpm Speed control: stepless Magazine capacity: 30 Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 900 × 600 mm Operating hours Machine operating hours: 54,796 h Spindle operating hours: 23,462 h Program run time: 20,377 h EQUIPMENT Fixed tilting table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area with BLUM laser Hedpfxszmrpuo Ac Tsr 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

See details

Listing

Truck-mounted crane semitrailer TECNOKAR SEMIRIMORCHIO TECNOKAR SCARRABILE CON GRU

San Pietro in Gu' (PD)

8,314 km

Truck-mounted crane semitrailer
TECNOKARSEMIRIMORCHIO TECNOKAR SCARRABILE CON GRU

Call

Condition: used, first registration: 03/2013, color: grey-black, Year of construction: 2013, gearing type: other, LICENSE PLATE: XA020AJ TITLE: TECNOKAR SWAP BODY SEMI-TRAILER WITH CRANE REF: 25R14 Hedpfsx Twfqjx Ac Tsr YEAR: 03/2013 AXLES: 3 MAXIMUM LENGTH: 9.60 m COUNTRY OF ORIGIN/EXPORT: Italian PAYLOAD: 25900 kg - TRAILER: 38000 kg gross vehicle weight TYPE OF EQUIPMENT: swap body EQUIPMENT MODEL: HYVALIFT 30.67 SK EXTENSION: yes SWIVEL: yes ROLLER: retractable ADR: no CARRIAGEABILITY FROM: 5.00 m + 0.20 m TO: 7.60 m + 0.20 m SUSPENSION: pneumatic BRAKES: disc TIRES: 385/65 R.22.5 ACCESSORIES: - PENZ 15ZRT8.50 folding crane, year 2012, 1 extension on the 1st boom and 2 extensions on the 2nd boom - joystick - GUSELLA SHZ305/K/0 grab with 6 blades, year 2012, capacity 300 liters, weight 428 kg with built-in rotator REFURBISHED: no SERVICED: no TIRE CONDITION: 40% - Errors and omissions excepted The prices shown do not include VAT. Please contact the sales representative for an updated price and condition comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA SWAP BODIES operates in the sale and purchase of industrial and commercial vehicles, specializing primarily in the waste management sector. Specialized in trucks, trailers, and swap body equipment. With a readily available stock of over 50 trucks and over 150 swap bodies, containers with and without cranes. S.E.&O Given the number of listings and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

See details

Auction

Horizontal plate boring mill PARPAS ML 100 - 5000

Sachsen

8,028 km

Horizontal plate boring mill
PARPASML 100 - 5000

€7,000

To the auction

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, travel distance X-axis: 5,020 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 2,000 mm, spindle diameter: 100 mm, controller model: Heidenhain 415 B, TECHNICAL DETAILS Spindle diameter: 100 mm Travel in X-axis: 5,020 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 2,000 mm Tool holder: SK 50 MACHINE DETAILS Control system: Heidenhain 415 B Rotary table dimensions: 2,500 x 2,000 mm EQUIPMENT Indexable milling head 2.5 60-position tool changer Rotary table manufacturer: Scharmann Note: The rotary function of the rotary table is defective. The machine is sold without pallet changers. Hedpezlryqjfx Ac Ter

See details

Advertise here