Generator

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K Lajdpfsz I Tt Isx Ahajh MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm from a maintenance workshop good / well-maintained condition (!!) - inspected condition - machine video - ?v=RY-amZooeX4 Equipment: - robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * swiveling control panel, front right * 2D graphic display for visualization and multi-simulation * 2D graphic programming * easy operation - CNC motorized backgauge * travel range 10.0 - 1,600 mm * pneumatic / retractable gauge fingers * adjustment speed max. 250 mm/sec. * rear sheet support table with brushes - motorized lower beam adjustment (S-axis) - electro-hydraulic folding movement of the lower beam - pneumatic upper tool clamping - pneumatic lower tool clamping - 1x mobile dual foot pedal Lsdpjxaa A Nsfx Ahaeah - original operating manual + electrical/hydraulic schematics Special accessories included: - 1x segmented set of goat-foot upper tools, H = 150 mm - 1x segmented set of goat-foot upper tools, H = 200 mm - 1x standard sharp-nosed rail (installed) - 1x segmented set of bending/lower tools (installed) - rear sheet support with brushes

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Laedpfx Ahoz I S Uwoaoh Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Laodpfsz Rqcmex Ahaeh Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: used, Year of construction: 2018, 3D printer Ledpfxsvtftqs Ahajah Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Drive power: 15 kW EQUIPMENT Control system Suitable for secondary shredding Lsdpsz Ngbvjfx Ahaeah The seller has a suitable conveyor belt in stock as an optional extra.

Condition: ready for operation (used), functionality: fully functional, screw diameter: 200 mm, Granulation of temperature- and shear-sensitive plastics Suitable for soft PVC Suitable for rigid PVC Suitable for HFFR formulations Suitable for elastomer compounds for low-, medium-, and high-voltage cables TECHNICAL DETAILS Screw diameter: 200 mm Length from feed inlet to end: approx. 1,100 mm L/D ratio: approx. 5.5 : 1 MACHINE DETAILS Drive power: 72.5 kW Laedpfxez Ngaxs Ahajh Overall machine length: approx. 2,500 mm Feed inlet height: approx. 1,000 mm EQUIPMENT Eccentric granulation EGR Degassing zone Can be used as a single-screw extruder for various processing applications

Condition: used, Univ. universal tool milling machine DECKEL, type FP 1 Machine no. 52185, year of manufacture 1968 Travel distances: X: 300 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 250 mm Spindle mount: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-shifting Power connection: 380 volts, 50 Hz - Feed in the X and Z axes - Two motor speeds and 8 gear stages - Quill travel on the vertical milling head: 60 mm - Fixed tilting table - Coolant system in the machine base - Adjacent control cabinet - Counter holder with counter bearing for horizontal milling, SK 40 Lasdpfx Aedzqb Sshaeh Space requirement L x W x H: 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 6,430 mm Mast type: Triplex mast Full free lift: available Fork length: 1,200 mm Hydraulic functions: 3rd valve and 4th valve Side shifter: available Hydraulically adjustable forks: available MACHINE DETAILS Manufacturer: Linde Type: E25 Year of manufacture: 2019 Drive type: Electric Battery type: Lithium-ion Battery year of manufacture: Battery voltage: 90 V Battery capacity: 268 Ah Measured idle voltage: 97.4 V Operating hours: 12,011 h Own weight: 5,200 kg Overall length: 3,700 mm Overall width: 1,200 mm Overall height: 2,824 mm Service valid until: UVV (Technical Inspection Association) valid until: EQUIPMENT EVO facelift model Former Linde full-service unit Hydraulic double pallet clamp Full cabin Heater Windshield wiper White, non-marking tires LED work light front LED work light rear Road traffic lighting with turn signals Orange warning light Safety Light front Safety Light rear Front camera Comfort seat All dimensions are approximate. No warranty is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. Ledpfxoz R Tpks Ahaeah If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 639

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Electrical data Battery voltage: 80 V Charging current: 140 A Suitable battery capacity: 800–1,000 Ah Mains connection: 400 V / 16 A Battery connection: REMA 320 A MACHINE DETAILS Ledpfxoz R Sg Ie Ahaeah Manufacturer: TCE Type: 80 V 140 A Year of manufacture: 2026 Condition: New and unused, in original packaging Length: 600 mm Width: 600 mm Height: 600 mm Weight: 70 kg EQUIPMENT 400 V / 16 A mains connection REMA 320 A plug All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift truck available on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 8040

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Hello I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 400 V3 with driven tools and C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 3190 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 2000 Laodpotpuh Aefx Ahash _ Machine parameters: - head: 12 - tools for VDI 30 holders (every second socket driven) - max. rpm 5000/min. - max. turning length in the Z axis: 640 mm - max. turning diameter in the X axis: 290 mm - C axis - driven tools - BERG KH 200 spindle holder - max. shaft diameter Fi-65 mm - finished part collector - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Charging voltage: 80 V Charging current: 120 A Suitable battery capacity: 600–900 Ah Ledpfx Ahoz R Sgusaoah MACHINE DETAILS Year of manufacture: 2026 Mains connection: 400 V / 16 A Dimensions (L × W × H): 600 × 600 × 600 mm Weight: 70 kg EQUIPMENT Rema connector: 320 A Original packaging All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: * Side loading up to 6 tonnes is possible with a large forklift truck on site. Loading is at your own risk. * Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tonnes and up to a width of 230 cm. * Collection is only possible after receipt of the payment confirmation by email. * Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. * In case of delayed collection, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 8020

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Battery voltage: 80 V Charging current: 100 A Suitable battery capacity: 500–700 Ah Mains connection: 400 V / 16 A Battery connector: REMA 160 A MACHINE DETAILS Manufacturer: TCE Type: 80 V 100 A Year of manufacture: 2026 Condition: New and unused Dimensions (L × W × H): 600 × 600 × 600 mm Weight: 70 kg EQUIPMENT Original packaging 400 V, 16 A mains plug REMA 160 A battery connector All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: * Side loading up to 6 t is possible with a large forklift on site. Loading is done at your own risk. * Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 t, and up to a width of 230 cm. * Collection is only possible after receipt of the payment confirmation by email. * Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. Lajdpfx Ahoz R Sgnsash * A storage fee of €20 per machine per day will be charged for late collection. Outstanding storage fees must be paid in full before collection. Lot number: 8011

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. Lasdpfx Aewym Nfehaeh The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Laedoz R Sf Rspfx Ahaoh TECHNICAL DETAILS Output voltage: 48 V Charging current: 50 A Suitable battery capacity: 300–500 Ah Maximum battery capacity: 800 Ah (?) Protection class: IP66 Mains connection: 220 V Connector type, battery side: Rema, 160 A Impact protection: available MACHINE DETAILS Year of manufacture: 2026 Overall length: 300 mm Overall width: 200 mm Overall height: 200 mm Weight: 10 kg EQUIPMENT 220 V mains plug Rema connector, 160 A All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: * Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. * Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. * Collection is only possible after receipt of payment confirmation by email. * Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. * If collection is not carried out within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 4850