Loading ramp for two-axle vehicles

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Lrsdpfoz D Taajx Afust Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: new, Year of construction: 2024, SJET Series, multi-purpose industrial part washers which are very easy to operate. Rotary table washer. Rotary table parts washer. Perfect parts washing systems for degreasing and maintenance purpose cleaning. Operating Principle : After the basket is loaded to the machine hot water mixed with cleaning detergent is sprayed to the rotating basket. Specially mounted stainless stell nozzles and rotational movement of the basket provides perfect cleaning for all parts inside the basket. Water is filtered before returning to the tank which provides extended lifetime for detergent and minimise cost. SJET series reduces consumption of water and detergent and help you protect the environment SJETs are manufactured using AISI 304 stainless steel. Lsdpfed I Aw Eex Afusrt Different basket dimensions and capacities are available. Rinsing and drying options are available. Different lid types are available. Rotary basket washer Please feel free to contact for other details and options.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser Lrsdpsz A D Irefx Afust CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, empty load weight: 550 kg, total length: 3,210 mm, total width: 1,162 mm, total height: 2,050 mm, discharge height: 1,080 mm, machine/vehicle number: 2211410, TECHNICAL DETAILS Capacity, light vegetables: max. 400 kg/h Capacity, heavy vegetables: max. 800 kg/h MACHINE DETAILS Voltage: 3~ 400 V Frequency: 50 Hz Connected load: 7 kW Fuse rating: 25 A Water content: 500 l Protection class: IPX4 Dimensions & Weight Dimensions (L x W x H): 3,120 x 1,162 x 2,050 mm Machine weight: 550 kg Loading height: 1,140 mm Unloading height: 1,080 mm EQUIPMENT Barbotage system Frequency-controlled pumps Inverter control Stainless steel design Conveyor belt with product discharge Rinsing via spray device Height-adjustable feet Spiral water guide Extended and raised product discharge zone, special design Lrodsz Ahnrepfx Afuet Extension of the product discharge zone: 200 mm Documentation

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate: clamping plate -Width: 1000 mm -Total length: 7060 mm, clamping area 6260 mm -Plate height: 235 mm -Groove width: 22 mm Lrsdpfxogvm D Hs Afust -Groove spacing: 125 mm -Dimensions: see drawing in the photos -Transport dimensions: 7060/1000/H235 mm

Condition: used, machine/vehicle number: BXMS230118020, No minimum price – guaranteed sale to the highest bidder! The new price was €4,950! TECHNICAL DETAILS Relief for the lower back: up to 25 kg Support force: continuously adjustable Ljdpfxozz H D Aj Afusrt MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 600 x 600 x 600 mm Weight: 5 kg FEATURES Purely mechanical control at hip height Automatic deactivation of support during walking Force absorption during bending and force release during lifting Load transfer from the shoulders to the thighs via a support structure Energy storage Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 2000

Condition: used, Year of construction: 2019, battery capacity: 1,376 Ah, battery voltage: 80 V, overall weight: 2,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Battery type: 8 PzS Nominal voltage: 80 V Capacity: 1,376 Ah Voltage in idle state: 88.89 V Suitable for: Linde E70 and E80 Dimensions & Weight Dimensions (L x W x H): 1,290 x 1,030 x 770 mm Net weight: 2,500 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1156 Lrodpfxezz H Dps Afuet

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: xxxxx, Washing machine Manufacturer: CIEFFE Type: WCR 8/X/"/VAP/US/G-R Year of construction: 2007 Heating: 120kW gas Evaporator vacuum boiler, ultrasonic, dryer, compact de-oiler, level controller Cleaner tank 4500 ltr. Lodpfxsqtyxko Afuort Flood tank 4500 Ltd.

Condition: used, Year of construction: 2020, overall weight: 540 kg, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Fork adjustment: 4-way Fork length: 1,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,500 x 1,600 mm Self-weight: 540 kg EQUIPMENT 4-way fork adjuster Lrjdpfx Aozz H Diefuot Fork carriage Fork tines with 1,200 mm length All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1152

Condition: used, Year of construction: 2019, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity forklift: 2,500–5,000 kg Fork length: 1,350–2,000 mm Mounting: FEM 3A MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 800 x 1,000 mm Net weight: 250 kg EQUIPMENT Hydraulic telescopic forks For loading onto a pallet for truck loading All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 1103 Lredpfezz H A Eex Afust

Condition: excellent (used), Year of construction: 2006, 45 linear meters of SSI Schäfer Palflex pallet racking, including shelf inserts Used item, in good condition, see photos Year of manufacture 2006 Height approx. 6.5 m Depth 120 cm Field load 12,000 kg Frame galvanized Beams red Shelf inserts included! 2 pieces of grating per 2.7-meter beam length Negotiable price: €7,490.00 net ex warehouse Offer includes: + 17 units of frames, pre-assembled, depth 120 cm, height approx. 6.5 m + 96 units of beams, length 2.7 m, 1500 kg load capacity per shelf with evenly distributed load + 192 units of safety locks + 96 units of galvanized shelf inserts for 48 levels, each 2.7 meters beam length + 68 units of concrete anchors + Load signs Item is in stock. Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information, and prices as well as prior sale! See our general terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: Lredjkx E Ryopfx Afujt • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly 30-50 semi-trailer truckloads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelf racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND CORE BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including complete clearance. 2. Commission-based auction: Conducting auctions on commission. Our full service provided by our own employees: Cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete handover. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2022, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS FEM class: FEM 3 Load capacity forklift: 3,000–5,000 kg Fork length: 1,350–2,350 mm Lredpszz H Afefx Afuot MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 1,000 x 1,000 mm Self-weight: 200 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1081

Condition: used, Year of construction: 2019, No minimum price – guaranteed sale to the highest bidder! Ljdpfx Afszz Hzzeuort TECHNICAL DETAILS Load capacity: 5,000 kg FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Internal opening width: 70–940 mm Rotation range: 360° Fork length: 2,400 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,350 x 1,000 mm Self-weight: 1,000 kg Originating machine: Linde E50HL EQUIPMENT 3rd, 4th, and 5th valve Rotating clamp with 360° rotation function Fork positioner Side shifter Fork, 2,400 mm long All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1013

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DG13M is a compact and precise spiral drill sharpener designed for sharpening tools made of high-speed steel (HSS) and cobalt alloys. The machine combines high sharpening accuracy with simple operation, delivering professional results without the need for specialized operator skills. It is ideal for use in workshops, tool rooms, and maintenance departments. Main advantages of the machine Precise sharpening of spiral drills with diameters ranging from ø2 to ø13 mm. Adjustable point angle from 90° to 135° – compatible with most industrial standards. CBN (borazon) grinding wheel included – ensures accurate sharpening of HSS steel drills. Easy operation – the grinding process requires no previous operator training. Compact dimensions and low weight – a mobile device that is easy to move and install at any workstation. Complete ER20 collet set and holder included – ready for operation immediately after setup. Lrodevu Aakjpfx Afuot Design and technology The CORMAK DG13M is equipped with a precise 120 W motor operating at 4800 rpm, providing optimal conditions for sharpening high-speed steel and cobalt drills. Thanks to the use of a CBN (borazon) grinding wheel, the sharpener ensures high durability and repeatability of the sharpening process. The solid cast iron housing eliminates vibrations, resulting in stable operation and uniform sharpening of cutting edges. Precision and work efficiency The CORMAK DG13M drill sharpener enables fast and repeatable sharpening of cutting tools, significantly extending their service life and reducing operating costs. The adjustable sharpening angle and dedicated collets ensure precise tool guidance, eliminating errors caused by manual positioning. Applications The machine is suitable for: mechanical workshops, tool rooms and production plants, maintenance departments, small and medium-sized enterprises requiring quick tool regeneration. Standard equipment CBN grinding wheel – 1 pc. (for HSS steel) 11 × ER20 collets: ø3 – ø13 mm Clamping holder – 1 pc. Technical specifications Parameter Value Drill diameter range ø2 – 13 mm Point angle 90° – 135° Power supply 120 W / 230 V Motor speed 4800 rpm Weight approx. 9 kg Dimensions 330 × 170 × 160 mm

Condition: used, machine/vehicle number: 90540056, Year of construction: 2017, operating hours: 788 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 2,500 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 150 Ah Battery type: 2 PzB Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,720 mm Own weight: 800 kg Service valid until: 07/2027 UVV (Occupational Safety and Health) certificate valid until: 07/2027 Operating hours: 788 h All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Lrsdpjzz Hzusfx Afust Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 446