Used car workshop equipment for sale (51)

Year of construction: 2016, condition: good (used), Approx. 20 transport carts / storage carts, Fetra – used: Price per unit ex works: €95.00 (net)! Price for purchasing all 20 units: only €1,500.00 (net) ex works! Manufacturer: Fetra Type: 2102 Year of manufacture: varies, e.g., 2016 / 2017 Dimensions: approx. depth 1m, width approx. 70cm Load capacity: 400kg Weight: approx. 29kg Mostly with clipboard New price: approx. €235.00 Total load capacity (kg): 400 Wheel size (mm): 160 Tires: TPE Loading area height (mm): 233 Usable area length (mm): 1000 Usable area width (mm): 700 Overall length (mm): 1180 Overall width (mm): 705 Overall height (mm): 953 Transport cart made of steel tube welded construction, powder-coated brilliant blue RAL 5007. Platform made of wood composite board, surface with beech decor. 2 swivel and 2 fixed casters, TPE tires, hubs with ball bearings. Parking brake on the swivel casters. Condition: good Dedpfx Asz Dthwjb Newc Available: Location: Hamburg

Condition: good (used), Special tool Moto Guzzi Suzuki Aprilia with perforated wall system dismantled ready for loading invoice with VAT shown Dwjdpfx Abetvfd Ds Njc

Year of construction: 2019, condition: like new (used), TERMODUETTO CONDENS RIELLO COMPLETE WITH (Class A boiler / control panel) Year: 2019 Dwedpfsxqrppox Ab Noc

Condition: excellent (used), functionality: fully functional, Heavy-duty trailer Manufacturer: FETRA Type: 6787 Year of manufacture: 1999 Djdpfxsygc R Rj Ab Nswc Loading area: Width: 1250 mm Length: 2500 mm Loading height: 500 mm Weight: approx. 500 kg In very good condition.

Condition: ready for operation (used), Year of construction: 2010, Mobile oil warm air generator / heater / heater 120 kW - Used device from rental fleet - built in 2007 - for construction heating / building sites / stables / tents / trade fairs / workshops / etc. Offer description: Dodpfevnu Akjx Ab Nswc TB 110, mobile oil warm air generator with separate exhaust gas duct, mounted oil burner RG 2, heating oil pre-filter with quick venting and single-line system, radial fan and plug-in thermostat preparation. Nominal heat load: 120 kW Air output: 6500 m³/h Connection: 230 V/50 Hz Motor output: 1.1 kW Weight: 235 kg Dimensions LxWxH: 200 x 90 x 115 mm Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain caps are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a shipping company. If you do not have contact with shipping companies, we will be happy to help you with addresses or inquire for you.

Condition: ready for operation (used), Year of construction: 2007, Mobile oil warm air generator / heater / heater 120 kW - Used device from rental fleet - built in 2007 - for construction heating / building sites / stables / tents / trade fairs / workshops / etc. Offer description: TB 110, mobile oil warm air generator with separate exhaust gas duct, mounted oil burner RG 2, heating oil pre-filter with quick venting and single-line system, radial fan and plug-in thermostat preparation. Nominal heat load: 120 kW Air output: 6500 m³/h Connection: 230 V/50 Hz Motor output: 1.1 kW Weight: 235 kg Dwodpfevnux Ejx Ab Njc Dimensions LxWxH: 200 x 90 x 115 mm Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain caps are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a shipping company. If you do not have contact with shipping companies, we will be happy to help you with addresses or inquire for you.

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 220 V, oil tank capacity: 5 l, machine/vehicle number: GDI-6000, Equipment: CE marking, It features a specially designed ergonomic structure. (The cabinet section also serves as a cargo carrying box.) Dsdpfxjz D H Dfs Ab Nswc Aluminum body, test rail, and bottle holder; flexible, custom test tubes resistant to hot and cold weather conditions, 6X150 (mg). From 1 injector to 6 injectors, with easy-to-connect fittings, injectors can be connected in a short time. Thanks to the injector drip reservoir, you can perform detailed spray pattern detection. Each test lasts a maximum of 90 seconds. With a 200 bar system (Electronic Measurement) specially designed for the GDI-6000, pressures are measured clearly. The GDI-6000 reaches a maximum of 200 bar. Thanks to this pressure, drip tests can be observed very clearly. With the ability to print receipts, you can provide test results to service centers and organizations that require them. Thanks to the DATABASE, the (mg) values that more than 6000 different types of injectors should deliver can be seen on the 7.0-inch touch screen. Thanks to the NEW-ENJ+ MODE, you can create and save injectors and injection parameters that are not found in the DATABASE. Thanks to the OHM-TEST MODE, you can measure the injector (OHM test) values. AUTO-1: Low speed (4000 RPM) AUTO-2: Medium speed (5000 RPM) AUTO-3: High speed (7000 RPM) DRIP TEST: Thanks to the Leaking Out mode, you can perform injector drip (leakage) tests clearly under pressure. Thanks to the MANUAL MODE, you can perform the desired RPM, PULSE, and TIMER tests with the RPM+ PULSE+ and TIMER+ settings.

Condition: used, Galvanized steel boxes, 80 x 50 x 50 cm, used 🧰 Product Features • Material: Steel • Condition: used, see photos • Color: galvanized, green • External dimensions: approx. 79 x 54 x 51 cm • Internal dimensions: approx. 67.5 x 42.5 x 36 cm • Internal height: approx. 36 cm • Volume: approx. 115 liters Dsdpfxsxnxcws Ab Njwc • Weight: 15 kg • Base & walls: closed, small holes in the base • Stackable: Yes 💰 Price: €49.00 net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment We continuously stock over 5,000 linear meters of pallet racking from numerous manufacturers. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our general terms and conditions; all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse equipment & heavy-duty racking, used & new Description: Are you looking to buy high-quality warehouse racking? With approximately 100 employees, Lenox Trading is one of the largest dealers in new and used warehouse equipment in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of storage platforms & steel platform structures immediately available • 30–50 semi-trailer truckloads of goods processed weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether you want to buy pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and installation. 🏭 TOP BRANDS, USED & FROM INSOLVENCY/BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND AREA OF BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, all-round service package: 1. Flat-rate purchase: Purchase of merchandise, equipment & complete inventory including thorough clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling, and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Year of construction: 2020, condition: like new (used), WSL680 with perforated side panels Dodpfxour Rxrj Ab Nowc As good as new, unused! Workshop trolley with one shelf and 2 drawers 400 kg load capacity, perforated metal side panels, 2 x fixed castors, 2 x swivel castors with brakes Dimensions: (WxHxD) approx. 702mm x 922mm x 922 (1002mm with handle) Fully assembled incl. 1 x drawer h= 60mm 1 x drawer h= 150mm 1 x shelf Structure powder-coated in the colors RAL 7035 (body) RAL 7021 (drawers)

Condition: new, range L-W-H 780 x 480 x 1050 mm weight 79,5 kg 6 St. The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. Dedpfx Aju Imk Rsb Newc The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 ", 3/8", 1/2 ". Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Various screwdriver sets. Pliers assortment.

Year of construction: 2001, condition: used, Technical details: lifting capacity: 0,15 t span width: x. 1200 mm arm length:: max. 1200 Lifting height: 2400 mm stroke speed: handgesteuert weight of the machine ca.: 0,42 t dimensions L x W x H: 2,2 x 0,75 x 1,65 m Engine hoist / engine crane Welded sectional steel Lifting movement via lifting beam pneumatic vertical movement (pneumatic pressure cylinder) via hand knob Load hook type SIKA 1, cable safety device movable, braked in vertical position of the drawbar, double wheel swivelling 90° right/left, front area 2x wheels fixed Dwsdpfxeu Nvixs Ab Njc Accessories 2x various lifting straps and 1x chain length approx. 950mm *

Condition: new, Year of construction: 2025, functionality: fully functional, Rotating basket parts washing machine for washing engine blocks and parts - new machine Dedpfx Asncfmveb Newc Technical details: Basket diameter: 900 mm Loading Height: 450 mm Loading Capacity: 300 kg Tank capacity: 80 lt Pump pressure: 2,5 bar Pump power: 3,0 Hp Heater: 7,5 kw Electricity (V/Phase/Hz): 220-380-415/3-1/50-60 Timer: 0 - 90 min. Working temperature: 0-90 C° Packing size:1450x1080x1340 mm Packing weight: 300 kg Main dimensions: W x L x H: 1100 x 1100 x 1150 mm Weight: 350 kg The parts washing machine is also available in larger sizes! Larger machines: AWM1250: With 1150 mm basket diameter and tank capacity 200 lt AWM1500: With 1350 mm basket diameter and tank capacity 300 lt If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: used, Workbench vise, parallel vise ORION with dovetail guide and height adjustment Type: 125 Jaw width: 125 mm Jaw height: 25 mm Clamping range: max. 210 mm Overall height: 590 mm - 360° rotatable - Dovetail guide - Anvil surface for light straightening work - Approx. 250 mm height adjustment without lifting system Dedpfxszpbrko Ab Newc Weight: 41 kg Good condition

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 110 kg, usable tank capacity: 30 l, machine/vehicle number: DPF-995, Equipment: CE marking, TECHNOMAKS DPF-995 Professional Diesel Particulate Filter Cleaning Machine – 12V – Automatic – Test & Report Thanks to the TECHNOMAKS Mobile Diesel Particulate Filter Cleaning Machine, DPF cleaning can be easily performed on vehicles manufactured to Euro 5 and Euro 6 standards. It tests the fill level and performs cleaning without removing the diesel particulate filter. Dsdpfjz D Hriox Ab Nowc It easily removes soot and ash from vehicles through the oxygen temperature sensor and differential pressure sensors. It operates with a special cleaning fluid, water, and a generator, providing cleaning in a maximum of half an hour without removing the DPF filter. Using hydrogen-based chemicals, it dissolves soot, ash, and oil residues that have accumulated on the DPF and catalytic converter, and then removes them through the exhaust system with the help of water. After the liquid cleaning, a drying process is performed, and the cleaning process does not damage the DPF. It performs result-oriented measurement and cleaning operations on the vehicle. After the Diesel Particulate Filter Fill Level Test, the cleaning rate results can be reported on a receipt. Compared to other devices, it saves time because the DPF does not need to be removed. It offers DPF fill level testing and result-oriented operations. In terms of price/performance, it is more advantageous than other devices. In workshop use, operations can be completed quickly without the need to send vehicles elsewhere.

Condition: good (used), Oil conveyor, hose reel, automatic hose reel, oil hose reel -Hose reel: Automatic oil hose reel -Hose length: 5400 mm Dwsdpfxouncx Ne Ab Njc -Dimensions: 400/200/H495 mm -Weight: 18.2 kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 110 kg, usable tank capacity: 20 l, machine/vehicle number: RPM-997, Equipment: CE marking, TECHNOMAKS RPM-997 The TECHNOMAKS RPM-997 is a professional radiator and heater core cleaning machine designed to remove sludge, rust, sediment, and antifreeze residue from vehicle cooling systems without disassembling components. It enables heater core cleaning without removing the vehicle's dashboard and radiator cleaning without removing the radiator from the vehicle. It can also be used for cleaning the engine block and cylinder water channels, intercooler cooling circuits, LPG/CNG regulators, and cooling system lines. The device helps to check for constrictions or blockages in the cooling line by measuring the pressure within the system. The existing pressure value is measured before cleaning, and the cleaning process is initiated if necessary. After the process is completed, the pressure is measured again to check for improved system relief and circulation. The RPM-997 offers the flexibility to work with different vehicles and levels of contamination, with an adjustable temperature between 50–80°C and an adjustable cleaning time between 15–45 minutes. The heated cleaning fluid helps to remove rust, scale, sludge, sediment, and residues caused by the use of low-quality antifreeze from the system. Thanks to its powerful circulation pump, the cleaning fluid is circulated through the system at a high flow rate. This supports the effective cleaning of deposits in the radiator, heater core, and engine water channels. The cleaned system contributes to maintaining the engine's ideal operating temperature, reducing the risk of overheating in the summer, and ensuring more efficient and faster heating of the heater core in the winter. The device features a 20-liter capacity chrome stainless steel tank, a durable metal housing, and a removable and cleanable chrome filter. During cleaning, dirt and sediment from the system are collected on the filter, preventing them from returning to the system. Djdpjz D S Amofx Ab Newc The RPM-997 also provides professional service reporting. Vehicle registration number, mileage information, and pressure values before and after cleaning can be recorded. The process results can be printed from the device's integrated printer and delivered to the customer. Key Features * Heater core cleaning without removing the dashboard * Cleaning without removing the radiator * Engine block and water channel cleaning * LPG/CNG regulator cleaning * System pressure measurement * Pressure comparison before and after cleaning * Adjustable temperature of 50–80°C * Adjustable operating time of 15–45 minutes * 40 L/min high-flow pump * 20 L stainless steel tank * Removable and cleanable chrome filter * Vehicle information and service reporting system * Integrated printer Technical Specifications Dimensions: 95 × 60 × 50 cm Weight: 75 kg Color: Red Operating Voltage: 220 V Pump: 220 V AC / 50 Hz / 0.37 kW Pump Flow Rate: 40 L/min Tank Capacity: 20 L Temperature Range: 50–80°C Cleaning Time: 15–45 minutes Housing: Metal Tank: Chrome stainless steel Filter: Removable and cleanable chrome filter The TECHNOMAKS RPM-997 is a fast, controlled, and reportable cooling system cleaning solution for automotive service centers, radiator service centers, LPG/CNG service centers, and professional vehicle maintenance centers.

Year of construction: 2026, condition: new, functionality: fully functional, usable tank capacity: 5 l, machine/vehicle number: GDI-ECO, Equipment: CE marking, TECHNOMAKS GDI-6000 Dwodpfxjz D S Ezs Ab Njc The TECHNOMAKS GDI-6000 is a high-pressure injector test and cleaning device developed for performing testing, analysis, and professional cleaning operations on injectors used in gasoline direct injection systems. Thanks to its specially designed ergonomic body, aluminum test rail, and durable test chamber, it is suitable for professional service use. The device features 6 special test tubes, each with a capacity of 150 mg, that are resistant to different temperature conditions and have a flexible structure. With the GDI-6000, 1 to 6 injectors can be tested simultaneously. Thanks to its practical connection accessories, injectors can be quickly connected to the system. The special drip and spray observation chamber allows for detailed control of the injector's spray pattern, direction, and leakage. Each test operation can be completed within a maximum of 90 seconds. The device's specially developed electronic pressure measurement system can reach a maximum working pressure of 200 bar. Thanks to tests performed under high pressure, dripping and leakage problems in injectors can be observed more clearly. The integrated printer allows test results to be printed and presented to the customer or relevant organization. 6000+ INJECTOR DATABASE The GDI-6000 has a large database containing reference test values for more than 6000 injectors. The fuel quantity values that the injector should deliver can be viewed on the 7-inch touchscreen. NEW-ENJ+ MODE For injectors not found in the database, the user can create their own test parameters and save new injector information to the system. OHM TEST MODE Allows for the control of the electrical resistance values of the injectors. Thus, the OHM values of the injector coils can be measured during the test. AUTOMATIC TEST MODES AUTO-1: 4000 RPM low-speed test AUTO-2: 5000 RPM medium-speed test AUTO-3: 7000 RPM high-speed test By simulating different engine speeds, it enables the comparison of the fuel quantity and spray performance of injectors under various operating conditions. DRIP / LEAKAGE TEST Thanks to the Leaking Out mode, injectors are checked under high pressure. Leakage, dripping, and pressure loss problems in the injector nozzle can be observed. MANUAL TEST MODE RPM, PULSE, and TIMER values can be adjusted manually by the user. Thus, special test scenarios can be created using the desired speed, triggering time, and test time. PROFESSIONAL CLEANING MODES CLEANING 1: Performs pressurized cleaning by operating the injectors at different speeds between 1000–7000 RPM. CLEANING 2: Increases the open time of the injectors, allowing for more intense pressurized cleaning to be applied to the fuel passage channels and injector nozzles. REVERSE FLUSHING: Using special reverse connection accessories, liquid is applied to the injector in the opposite direction. This method ensures that the injector shaft, nozzle, and internal fuel channels are professionally cleaned. ULTRASONIC CLEANING MODE: During the ultrasonic cleaning process, the injectors can be operated in a controlled manner in the 1000–7000 RPM range. In this way, the mechanical operation and ultrasonic cleaning can be performed simultaneously.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 110 kg, tank capacity: 10 l, machine/vehicle number: CARBON-973, Equipment: CE marking, It performs in-engine carbon and soot cleaning using hydrogen technology in all gasoline, diesel, LPG, and hybrid engine vehicles. It has a hydrogen gas production capacity of 1,500 liters per hour, and the gas duration can be adjusted as needed. It can clean engines up to 3,500 cc in diesel vehicles and up to 6,000 cc in gasoline vehicles. It operates with a 220V / 230V – 10 Ampere electrical infrastructure. It provides effective cleaning of air intake pipes, throttle body, injector nozzles, piston oil rings, intake and exhaust valves with their lower surfaces, piston surface, and the upper surfaces of intake valves. It helps to clean carbon and soot buildup in critical engine components such as MAF and MAP sensors, cylinder head air passages, EGR valve, turbocharger, and manifold. Without requiring disassembly and reassembly, it cleans in-engine soot and carbon deposits with high efficiency in a maximum of 1.5 hours. After an approximately 45-minute process, it supports engine performance and helps to achieve up to a 10% improvement in lost horsepower. It contributes to the optimization of fuel consumption, supporting the achievement of performance close to factory specifications. Dwsdpfez D Sw Dex Ab Nsc It offers an economical and efficient solution with a high price-performance advantage. It contributes to bringing exhaust emission values closer to ideal operating levels. It supports the engine running quieter, smoother, and with less knocking. It helps to reduce potential engine failures and maintenance costs caused by carbon buildup.

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from Dwsdpfx Absu Imhcs Njc E10 - E20, 1/2" from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range.

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Dodpfou Imlhox Ab Nswc Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from E10 - E20, 1/2" from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range.

Year of construction: 2024, condition: as good as new (ex-display), Rim Balancing Machine: Dwodpfxot Tuqbo Ab Njc - Automatic clamping of a wheel hub with a heavy duty pneumatic clamping chuck - Automatic brake and wheel positioning - Fast balancing cycle time - Made of well-known brands heavy duty components - Fast tool changeover time - Servomotor as a spindle drive motor

Condition: good (used), Approx. 10 spring-loaded base trolleys, Zarges, 195 L – used - : Price per unit: €495 (net), ex location! Minimum purchase: 5 units! Manufacturer: Zarges Model: 40645, spring-loaded base trolley W 161 Year of manufacture: unknown With push handle Item no. Internal length (approx. mm) Internal width (approx. mm) Internal height (approx. mm) External length (approx. mm) External width (approx. mm) External height (approx. mm) Rated load (kg) Volume (litres) Weight (kg) 40645 1010 420 460 1060 470 800 30 195 21.0 Equipped with 4 swivel castors in corner configuration. Original price: approx. €1,500 Condition: good Available: immediately Djdpfsxqfnrjx Ab Njwc Location: Attenweiler

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. Dwedsfzkrnjpfx Ab Nsc History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: as good as new (ex-display), CMT–VSR Pro is an advanced high-speed core balancing machine including a manually operated, fixed-mount correction cutter that ensures a fine quality surface finish and a servo-controlled air valve to provide the highest measuring accuracy. The machine has been designed for the high-speed balancing of turbocharger core assembly of passenger car, light- and heavy-duty trucks. It is used for checking whether there is any unwanted dynamic phenomenon of a rotor at high rotational speed value e.g. the flexural of shaft by the moment of force. Balancing in a full range of rotational speed extends lifespan of turbocharger and eliminates the undesirable effect of whistling. Dedpfx Aoiihqwob Nswc Core is installed on the hub of the machine by the use of a mounting flange with the two clamps to lock it. Turbine wheel is driven by compressed air supplied through a drive sleeve with a nozzle system. During a measurement an oil with an appropriate temperature and pressure is supplied, as a result of which the balancing conditions are similar to those of a combustion engine. As a result, the vibration graph of a core in relation to a rotational speed value and a vibration norm is displayed. In addition, to simplify the analysis of the vibration graph, the software indicates the exact angular position of a mass correction

Condition: good (used), Hose reel, hose unwinder, tank hose reel, wall-mounted reel, oil conveyor, hose reel, automatic hose reel, oil hose reel, grease hose reel, grease hose reel, compressed air hose reel Dwodpfx Aowbpxlob Noc -Hose reel: Double hose reel oil-compressed air -Oil hose reel: length 6.65 m with flow meter -Compressed air: hose length 10.57 m -Dimensions: 800/500/H550 mm -Weight: 76 kg