S. steel tank 450l

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, drilling depth: 660 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,000 mm, drill diameter: 30 mm, TECHNICAL DETAILS Drilling depth: 660 mm Drill diameter: 30 mm X-axis travel: 700 mm Y-axis travel: 500 mm Z-axis travel: 1,000 mm W-axis travel: 250 mm Bjdpfxeya U U Uo Aglocu Spindle speed: 60 - 60,000 rpm Table length: 900 mm Table width: 500 mm Table load capacity: 2,000 kg MACHINE DETAILS Control system: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,706 x 3,960 x 2,650 mm Total weight: 8,000 kg EQUIPMENT CNC rotary table (4th axis) Chip conveyor Paper band filter Electronic handwheel Original documentation

Condition: new, Year of construction: 2023, functionality: fully functional, Drying system / dryer suitable for various materials such as powder, granulate etc. - Control for temperature regulation Bcsdpfequ R Najx Agleu This machine is connected and ready for testing in our machine hall.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller model: PHILIPS CNC 532, Equipment: chip conveyor, TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Table clamping surface: 630 x 500 mm Spindle taper: SK 40 Spindle speeds: 20 - 6,300 rpm Feed rate: 30 m/min MACHINE DETAILS Control: PHILIPS CNC 532 Internal coolant supply: 40 bar Total power requirement: 50 kW Dimensions & weight Machine dimensions: 4.98 x 2.78 x 2.93 m Machine weight: approx. 13.3 t EQUIPMENT Bcodoya Hcqepfx Aglou Chip conveyor Coolant system Rotary pallet changer Hydraulic swivel head (horizontal/vertical)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: AB0702, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, controller model: FANUC 21 iMB, table load: 500 kg, TECHNICAL DETAILS Travel X-axis: 650 mm Bjdpfjya E Thsx Aglecu Travel Y-axis: 500 mm Travel Z-axis: 530 mm Table clamping surface: 800 x 500 mm Spindle speeds: 60 - 8,000 rpm Spindle taper: SK 40 Spindle taper standard: DIN 69871 A Maximum table load: 500 kg Rapid traverse X/Y/Z-axis: 30 m/min Tool changer: 30 positions Tool diameter with full magazine: 80 mm Tool diameter with 2 free positions: 120 mm Maximum tool length: 250 mm Maximum tool weight: 7 kg MACHINE DETAILS Control: FANUC 21 iMB Total power requirement: 30 kVA Dimensions & Weight Machine dimensions (L x W x H): 2.4 x 2.2 x 2.46 m Machine weight: 4.5 t EQUIPMENT NC rotary axis with tailstock, manufacturer MECA-DIVIMEK (Spain), DCH 160 C 2 machine vices Coolant system

Condition: excellent (used), Technical specifications: Working width: 2050 mm Max. bending capacity for mild steel St40: 6.0 mm Max. pre-bending for mild steel St40: 4.0 mm Top roller diameter: 170 mm Side lower roller diameter: 170 mm Middle lower roller diameter: 145 mm Cone bending device Bsdpfxjwdwiqe Aglecu Hardened rollers Working height: 800 mm Mobile control panel Hydraulic folding bearings CE mark Motor power: 2.5 kW Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Weight: approx. 3 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis: 1,500 mm Travel Y-axis: 650 mm Travel Z-axis: 650 mm Pallet size: 1,740 x 650 mm Spindle taper: SK 50 Spindle speeds: 25 - 6,000 rpm Spindle overhang: 665 mm Bedpjya E Ryofx Aglocu Distance spindle nose to table: 200 / 850 mm Spindle motor power: 18.5 kW Max. spindle torque: 758 Nm Feed rate - longitudinal/cross/vertical max.: 8 mm/min Rapid traverse longitudinal and cross: 26 m/min Rapid traverse vertical: 20 m/min Drilling capacity (solid): 50 mm Tapping capacity: M 45 Tool changer positions: 60 Tool diameter: 125 mm Tool diameter with 2 empty stations: 260 mm Max. tool length: 400 mm Max. tool weight: 20 kg EQUIPMENT Chip conveyor Coolant device

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91132846, Year of construction: 2018, operating hours: 8,616 h, The mast will be disassembled by the manufacturer prior to transport. The technical data is based on the original quotation. The seller assumes no liability for its accuracy. TECHNICAL DETAILS Load capacity: 1,600 kg Load center distance: 600 mm Mast type: DZ-V mast Lift height: 10,700 mm Height of mast (retracted): 4,100 mm Free lift: 3,456 mm Height of mast (extended): 11,344 mm Fork tilt forward: 2° Fork tilt backward: 5° Fork length: 1,150 mm Fork dimensions: 40 x 120 x 1,150 mm Width between wheel arms/loading platform: 940 mm MACHINE DETAILS Height to top of overhead guard (cab): 2,263 mm Overall width: 1,282 mm Battery voltage: 51.2 V Tyres: Ø 343 x 114 Operating hours: 8,616 h EQUIPMENT ISM Online ETV 216i Bjdpfx Agoyaawhelscu Drive & liftPLUS equipment package Drive wheel, 140 mm wide Load wheel cover Panorama overhead guard Panorama rear-view mirror Blue floorSPOT lighting M-Device; including 2 adapters Video; video preparation Seat; leather MSG20 with 3-stage heating Voltage converter; 125 W, 48/24 V Battery: Li-Ion 51.2 V 360 Ah Type IM Charger: SLH300 D400 48 V 150 A

Condition: new, Atlas Copco G7FF 500 lt screw compressor NEW Specification: • condition - new • manufacturer - Atlas Copco • capacity - 984 l/min • main engine power - 7.5 kW • tank - 500 l • maximum operating pressure - 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards Bodohkttpepfx Aglecu • user manual in Polish • weight - 227 kg Additional information: • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service • available within 7 working days

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, overall weight: 1,298 kg, load capacity: 120 kg, arm reach: 3,900 mm, controller manufacturer: KUKA, number of axes: 6, TECHNICAL DETAILS Axes: 6 Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % MACHINE DETAILS Bedpfx Ajycqb Asglecu Robot control: KUKA Control protection class: IP54 Robot protection class: IP64 Robot pedestal height: 1,500 mm Weight: 1,298 kg

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Bjdpeycp Tkefx Agljcu Maximum film height: 500 mm Maximum roll diameter: 250 mm Core diameter: 76 mm MACHINE DETAILS (not available) EQUIPMENT (not available)

Year of construction: 2025, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Bcedpfx Agot Hfygslou Technical data: * Boiler output 100 kW * Hourly output up to 1,350 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Empty weight approx. 320 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 11,000 h, controller model: Sinumerik 840D, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working length: 6,500 mm, TruLaser Tube 5000 with Special Equipment: Laser TruFlow 2700 & SeamLine Tube! TECHNICAL DETAILS Laser Power: 2,700 W Maximum Sheet Thickness (Steel): 6 mm Maximum Sheet Thickness (Aluminum): 4 mm Working Area: 6,500 mm MACHINE DETAILS Laser Type: TruFlow 2700 Bodpfxsyanr To Agljcu Control System: Sinumerik 840D Laser Operating Hours: 11,000 h EQUIPMENT - Documentation / Manual - Safety light curtain - Sturdy machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency excited, with cooling unit - Maintenance-free three-phase servo motors - NitroLine high-pressure cutting - SprintLine for rapid processing - Programmable cutting gas pressure control - Laser cutting head with 5 lenses - Quick-change device for the cutting head - Laser power control - Laser logbook function - Automatic shutdown - Workspace illumination - Multi-beam light curtains - Fully enclosed and ventilated beam guidance - Compact dust extractor - Protective enclosure - PRS 3001 discharge station with brush table - Set of clamping jaws D 20–85 mm and D 85–150 mm - 1 set of V-shaped form shells and guide rollers for round tubes - 1 set of U-shaped form shells and guide rollers for a circumscribed diameter of 120 mm - SeamLine Tube

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 22,600 h, machine/vehicle number: A0230A2187, laser power: 7,000 W, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 116 mm, No minimum price – guaranteed sale to the highest bidder! TruLaser 5030 Laser Cutting Machine with Special Equipment TruFlow 7000! TECHNICAL DETAILS Laser power: 7,000 W Travel X-axis: 3,000 mm Travel Y-axis: 1,500 mm Travel Z-axis: 116 mm Max. sheet thickness (steel): 25 mm Max. sheet thickness (aluminum): 20 mm X-axis feed rate: 200 m/min Max. workpiece weight: 900 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 11,100 x 4,600 x 2,600 mm Total weight: 12,000 kg Control system: SINUMERIK 840D Laser type: TruFlow 7000 Laser hours: 22,600 h Bcjdsyanplopfx Aglsu EQUIPMENT • Enclosed machine frame with integrated laser unit • Motion unit for ultra-precise machining • Gantry drive combined with linear direct drives • Enclosed beam guidance • Single cutting head strategy • TFT color monitor • Longitudinal conveyor belt for small parts and scrap • Automatic pallet changer • Work area lighting • Positioning laser diode • Oil spray device • Piercline • FocusLine • NitroLine • PlasmaLine • CO2 Laser TruFlow • Maintenance-free turbo radial blower • Lens cutting head with 250 mm lens • Universal quick-change device (UTI) with bus connection • LensLine with condition monitoring • ControlLine: height control and sheet edge detection • Auto shut-off • ConturLine • FastLine • FlyLine • Microweld • USB interface • RJ-45 network connection • CE marking • Light barriers • Multi-chamber extraction system • Compact dust extraction unit • Complete operating manuals • Lens cleaning kit • Transport locks • Crosshairs/ measuring bridge

Condition: good (used), Year of construction: 2011, grinding length: 4,000 mm, We offer you the following: CNC Universal Cylindrical Grinding Machine Manufacturer: FERMAT Model: BUC E 63/4000 CNC Year of manufacture: 2011 Control system: SIEMENS 828D SL CONTROL SYSTEM Video of the machine under power available upon request. Technical Data: - Centre distance / max. grinding length: 4,000 mm - Swing diameter: 630 mm - Max. workpiece weight between centers: 3,000 kg - Max. workpiece weight with rotating spindle: 150 kg Axes: - X-axis infeed resolution: 0.0005 mm, feed rate up to 8,000 mm/min - Z-axis feed resolution: 0.001 mm, feed rate up to 8,000 mm/min - Table swivel: ± 4° Grinding Unit: - Grinding wheel: 750 × 100 × 305 mm - Peripheral speed: 25 - 45 m/s (option 10 - 50 m/s) - Grinding spindle power: 18.5 kW (option 30 kW) - Grinding head swiveling: +30° / -10° Workpiece Spindle / Tailstock: - Workpiece spindle swivel range: 0 - 90°, MT 6 - Tailstock MT 6, quill stroke 70 mm - Tailstock clamping force: 300 - 12,000 N Machine dimensions: - Length: 13,000 mm, width: 4,400 mm, height: 2,550 mm - Machine weight: approx. 19,000 kg Equipment (including selected options): - Heidenhain linear scales on X- and Z-axis - Hydrodynamic grinding spindle + roller bearing spindle 10 - 50 m/s - Automatic balancing system - Heidenhain TS260 axial touch probe incl. software - Cooling system with belt and magnetic filter, tank capacity approx. 900 l - Magnetic chucks Ø 300 / 400 / 500 mm Bedpfx Aex Rppijgljcu - Full machine enclosure - Mist extraction unit FilterMist FX 7002 - Central lubrication TriboTec - Pneumatics by FESTO - LED lighting, toolbox - CE compliant, documentation Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Technical data and information are subject to change and errors! Prior sale reserved!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Bcodpfx Aoycp Nleglou Number of spindles: 2 Main spindle Max. bar diameter: 16 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 Sub-spindle Max. bar diameter: 12 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Control: FANUC 18i-T Operating hours: 32,000 h EQUIPMENT FMB Minimag bar loading magazine Note: Dismantling and loading can be carried out by the seller for €1,500.