Screw compressor RENNER

RSF-PRO 2-30

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, CNC portal milling machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Type: STINGER Control: HeidenHain iTNC530 Year of manufacture: 2004 Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant Specifications Metric US Standard X - axis 1750 mm Y - axis 1400 mm Z - axis 600 mm Table length 1200 mm Table width 1000 mm Table load 5000 Feed X - axis 35000 mm/min. Y-axis feed 35000 mm/min. Feed Z-axis 35000 mm/min. Tool holder HSK 63 ISO/Bt/Mk Spindle power 25 kW spindle speed 18000 rpm Gbjdpfsuni D Eox Ah Eow Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) length 6000 mm width 4000 mm height 3850 mm weight 21000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 1991, Capacity 4 mm, cutting length 2550 mm, mot. back gauge, frontarms with scale, cutting gap adjustment, finger stop, foot pedal, pneumatic back sheet holder Gbedsq Tqwrjpfx Ah Ejw

Year of construction: 2024, condition: new, Working space 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-tight vacuum cabin in stable sheet steel construction Working gloves special rubber, wear resistant, cotton inside, firmly connected to the cabin against dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closing, double-walled, sound-absorbing foam, lockable, with electrical shut-off safety device Blasting media recovery Via coordinated MHG recovery system Operation ON/OFF switch for suction and lighting, Godjh Hxubepfx Ah Esbw pressure regulator, manometer and foot switch Viewing panels

Condition: excellent (used), Year of construction: 2012, Cutting range round: max. 530 mm Cutting range square: max. 530 x 520 mm Saw band dimensions: 7,000 x 54 x 1.6 mm Cutting speed: 10 - 110 m/min Drive power: 7.5 kW Weight: approx. 4.5 tons Gedpfewvtckjx Ah Ejbw

Condition: new, Year of construction: 2022, functionality: fully functional, Kunzmann WF 410M tool milling machine with Heidenhain TNC 128 control. Brand new and CE-compliant! Technical specifications: >> Year of manufacture 2022 Machine no. 411555 >> Milling table clamping area 650 x 375 mm Clamping slots 5 Slot width 14 H 7 Slot spacing 63 mm Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed X, Y, Z axes (infinitely variable) up to max. 5/5/4 m/min >> Travels X/Y/Z: 410/350/450 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m Gedpev Rppkefx Ah Esbw >> Connected load 13 kVA Accessories and equipment: >> Heidenhain TNC 128 control >> Heidenhain HR electronic handwheel 510FS >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Machine light >> Minimum quantity lubrication >> Counterholder >> Digital display for spindle stroke >> Oriented spindle stop (tapping without compensating chuck) >> Chip protection cabin >> KT 130 edge finder >> Coolant system >> 200 mm rotary table >> Dividing head with 125 mm three- and four-jaw chuck >> 125 mm hydraulic vise About the machine: Offered is a Kunzmann WF 410M tool milling machine, built in 2022, in new condition with a Heidenhain TNC 128 control. The TNC 128 provides numerous dialog-guided cycles with graphic simulation for fast and easy data entry, e.g.: various drilling cycles, thread cutting, bolt circles, hole pattern, rectangular pockets, rectangular tenons, and multi-pass milling of surfaces. A very easy-to-use control system. The machine also has hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal is very easy by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Kunzmann on site with power on.

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Lg.no. 24215 Technical data: - max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - stroke rate up to 34 1/min - backgauge with positioning control Pos100 - table height approx. 850 mm - front angle fence - 2 front support arms Gjdpfxjtpnlde Ah Eebw - Back gauge with light barrier - E- foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Condition: excellent (used), Year of construction: 2014, Surface grinding machine Manufacturer: Ziersch Type: ZT 24 Year of construction: 2014 Control system: Mitsubishi GOT-1000 Technical data of the vehicle: ----- - Travel X/Z: 400 / 250 mm - Magnet: 400 x 200 mm P9 - Table load max.: 250 kg - Distance from center of grinding wheel to table: 540 mm - Y-axis with direct path measuring system - Grinding wheel: 250 x 38 mm (50.8 mm bore) - Gradual grinding spindle control 1,000 to 4,500 rpm - Grinding spindle new in 04-2024! - V-constant - automatic vertical infeed with compensation of the dressing amount - Coolant device / paper belt filter Gbsdepwkt Iopfx Ah Esw - Magnetic separator - Weight: approx. 2,900 kg - Dimensions: 2,600 x 1,800 x 2,350 mm Accessories: ----- - Documentation - Handwheel

Condition: good (used), Year of construction: 2017, operating hours: 12,141 h, travel distance X-axis: 600 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, controller model: Heidenhain iTNC640, spindle speed (max.): 15,000 rpm, We offer in good condition Hermle C250U with following options: Gjdpfexqd S Njx Ah Eebw Heidenhain TS460 touchprobe Blum Laser Internal coolant 40 bar with paperbelt filter Air true Spindle

Year of construction: 2009, condition: ready for operation (used), Pressing force: 2300kN, bending length: 3230mm, ram stroke: 445mm, installation height: 615mm, distance between uprights: 2690mm, throat depth: 420mm, closing speed: 220mm/s, operating pressure: 300bar. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/3200mm, weight: approx. 19200kg, operating hours: approx. 26830h. Documentation available. An on-site inspection is possible. Gbsdsxbhg Eepfx Ah Esw

Condition: like new (used), Year of construction: 2017, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, table length: 3,500 mm, table width: 1,750 mm, spindle speed (min.): 24,000 rpm, Heidenhain iTNC 530 control Main spindle HSK-A 63 Speeds: 1-24,000 rpm Tool changer for 50 tools Gbedpfsw S T Iqsx Ah Eew Through-spindle cooling 5-axis milling machine with simultaneous milling head (Gabelkopf)