Used Cantilever Racking System for sale (35,669)

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Nodpeh Ek Dajfx Akcjla - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized Nljdpfx Aksd Tqalscsa - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Nsdpjfdkb Usfx Akcola - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Nljdpfxefdkbhj Akcja The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. Njdpomhhf Ssfx Akcsla According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Nljdpfjmhhl Hsx Akcsa Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone Nsdpfx Aemidyfskcela - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) Nlodsmkixwepfx Akcja - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany Nledpsqt Dmysfx Akcea - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 12, warranty duration: 12 months, The subject of sale is a warehouse for storing glass panes (321 cm x 255 cm) in boxes (12 x 2500 kg): glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. The magazine is in the form of sliding, slightly inclined drawers. Thanks to it, you can save up to 75% of space, because all the drawers are parallel to each other and separated by only 10 millimeters. We offer various dimensions and capacity versions, while after consultation, we are also able to produce a warehouse with various parameters, taking into account your individual conditions and wishes. Nodpfxef Sqf Uo Akcola The magazine is especially recommended for glass, stone, furniture and advertising companies, which care about the effective use of their space.

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, The subject of sale is a warehouse for the storage of glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. The magazine has the form of retractable, slightly inclined drawers. With it, you can save up to 75% of space, because all drawers are parallel to each other and only 10 millimeters apart. We offer various dimensional and lifting versions, however, after consultation, we are also able to produce a warehouse with different parameters, taking into account your individual conditions and wishes. The magazine is especially recommended to glass, stone, furniture and advertising companies, which care about the effective use of their space. Specification: Nodpfx Akjgfm Nmocela Glass racking system 10 drawers for 321 cm x 255 cm glass. Load capacity per drawer is 1500 kg.

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, The subject of sale is a warehouse for the storage of glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. The magazine has the form of retractable, slightly inclined drawers. With it, you can save up to 75% of space, because all drawers are parallel to each other and only 10 millimeters apart. We offer various dimensional and lifting versions, however, after consultation, we are also able to produce a warehouse with different parameters, taking into account your individual conditions and wishes. Njdpfx Ajd Tamljkcela The magazine is especially recommended to glass, stone, furniture and advertising companies, which care about the effective use of their space. Specification: Glass racking system 10 drawers for 160 cm x 250 cm glass. Load capacity per drawer is 800 kg.

Condition: good (used), Technical Data for the Pallet Racking System: Racking system: Cornix/Duwic Technical Data for Installation: Number of racking rows: 01 pc. Length per racking row: 22,540 mm Number of bays per rack row: 08 pcs Number of levels plus ground level: 02 pcs Scope of delivery includes: 09x pallet racking uprights, used Color: blue Profile dimensions: 100 x 80 x 3.00 mm Including horizontal and diagonal braces, base plates The uprights are pre-assembled Nedpfx Aeyvggbokcola (bolted truss construction) 1,880 mm high 1,000 mm deep 32x pallet racking beams, used Color: orange Box profile: 100 x 50 mm Beam type: L215B Connector: 6 HK Clear span: 2,705 mm Max. load per pair of beams: 2,300 kg, with evenly distributed load 64x locking pins, used Finish: zinc-plated (Sendzimir galvanized) For securing the longitudinal beams against unintentional removal 32x anchor bolts, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: carbon steel, galvanized Approved for: cracked concrete 18x shims, used Material: zinc-plated (Sendzimir galvanized) For leveling the upright frame when installed on uneven floors 01x load sign Displays bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about this item: This item is only available for pick-up. Any additional transport or shipping of this item will incur extra costs, which can be individually requested from us depending on delivery location and required volume.

Condition: good (used), Pallet racking system with chipboard decking according to your needs. Frame height, frame depth, beam length is also according to your requirements. Nedpfod Duc Tox Akcjla Send your enquiry and we plan your system accordingly.

Condition: good (used), Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking -Cantilever rack: two-sided, height 4000 mm Nledpfxoyu Um Ts Akcsa -Stands: 5x 340/150/H4000 mm / 350/300/3400 mm -Cantilever arms: 70 pieces 140/140/1500 mm -Cross braces: 124 pieces 60/40/1350 mm -Submission/Price: complete -Weight: 4100 kg

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: Modell 5003, carrying capacity per cantilever arm: 1,500 kg, shelf height: 3,585 mm, total length: 6,200 mm, total width: 1,520 mm, total height: 3,985 mm, number of shelf rows: 8, Cantilever rack, roll-out, make Lützenkirchen Nsdpeyzn S Rjfx Akcjla

Condition: good (used), Cantilever rack OHRA 3 m high Over 100 meters in stock, see pictures. Height: 3 m Arms: 100 cm Load capacity per arm: 800 kg 4.5 running meters, 4 uprights with arms. Negotiation price: €2,360 net Offer includes: - 4 uprights with base, each 3 m high - 4 adjustable arms per upright, each arm 100 cm, load capacity 800 kg/arm - Diagonal braces, stabilizers, and spacers included Nsdpfjcd Dwysx Akcjla - Frame distance: 150 cm - Load capacity per upright/per side: 3,200 kg Heights of 2.5 m, 4 m, or 6 m also available Other configurations available on request. Constant stock of over 3000 lfm pallet racking from various manufacturers. Transport and assembly available on request. (Technical data, specifications, and prices subject to change without notice. Intermediate sale reserved! See our general terms and conditions. All prices excl. VAT, ex stock.) Buying / Selling: We are constantly purchasing and offering numerous items from various sectors: - broom-clean business clearances - company liquidations - fast – flexible – effective! We also clear or dispose for insolvency administrators. Contact us with a brief description and we will get back to you promptly. To visit our page, please click on our logo!

Condition: used, Year of construction: 2018, functionality: fully functional, load capacity per storage section: 1,000 kg, total length: 37,030 mm, total height: 4,310 mm, total width: 4,590 mm, shelf height: 4,310 mm, We are offering a used, fully functional flow rack system with a two-level construction (ground floor and upper floor) for sale. This system is perfectly suited for storage and order picking according to the FIFO principle (First In – First Out) and is ideal for logistics, shipping, or manufacturing operations. The racking is optimized for cartons with dimensions of 600 x 400 x 250 mm, accommodating a total of up to 3,000 cartons. Dimensions: Nlodpoyxqhvefx Akcea The entire system has a total length of approx. 37 m, divided into two sections: one continuous block (approx. 20 m), a staircase section (approx. 1.3 m), and a second block with a walk-through passage (approx. 15.6 m). The total depth is approx. 4.6 m and consists of two racking depths of 1.3 m each, as well as a central service aisle of approx. 2 m. The upright height is approx. 4.3 m; the bottom edge of the intermediate deck (upper floor) is at approx. 2 m, providing sufficient clearance for ergonomic work on the lower level. Configuration and equipment: Each bay is approx. 2.12 m wide (upright width approx. 0.1 m) and contains a total of 10 flow channels – 5 on the lower and 5 on the upper level. Shelf heights are variably adjustable via perforations in the uprights, allowing flexible adaptation to different article sizes. The shelves are equipped with roller conveyors that have a slight incline, ensuring goods and handling units automatically move to the picking side. Access to the upper floor is via an integrated staircase. A central aisle between the rack rows allows loading from the rear and picking from the front. Load capacities (with evenly distributed loads): - Shelf load: 100 kg - Bay load: 1,000 kg - Mezzanine floor: 250 kg/m² Summary of core data: - Total length: 37.03 m - Overall width / depth: 4.59 m - Upright height: 4.31 m - Headroom lower level: approx. 1.98 m - Bay width: 2.12 m - Shelves per bay: 10 (5 lower / 5 upper) - Roller conveyors: yes, inclined (FIFO) - Shelf load: 100 kg - Bay load: 1,000 kg - Mezzanine floor load: 250 kg/m² The system will be dismantled at its current location prior to collection. Inspection possible by appointment. Self-collection required.

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Feralco Type: NS Technical Data for Installation: Number of racking runs: 01 pcs. Length per racking run: 22,455 mm Number of bays per run: 08 pcs. Nsdeyknl Ispfx Akcela Number of levels plus floor level: 02 pcs. Scope of delivery includes: 09x pallet rack frames, used Material finish: Sendzimir galvanized Type: 20 M Profile dimensions: 95 x 60 x 2 mm Incl. horizontal and diagonal braces, base plates Frames are pre-assembled (bolted truss) 2,550 mm high 1,250 mm deep 32x pallet rack beams, used Material finish: RAL 2004 orange Box profile: 80 x 50 mm Beam type: 80 E15 Connector: 3 HK (hooks) Clear span: 2,700 mm Max. load per beam pair: 1,500 kg, with evenly distributed load 64x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 36x wedge anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Execution: Carbon steel, galvanized Approved for: cracked concrete 18x shim plates, used Finish: completely galvanized For leveling the rack frames installed on uneven floors 01x load sign Indicating bay and compartment loads, manufacturer, and job number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transport or shipping beyond this must be arranged separately and will incur additional costs, which can be requested from us depending on the delivery location and order volume.

Condition: like new (used), Cantilevered construction for long goods. Profiles are made of solid IPE steel. Single-sided rack with 6 supports and 24 arms 6 sets available Price: €5,000 per set Length per arm: 1,500 mm Load per arm (IPE 140): 1,500 kg Load per upright (IPE 270): 6,000 kg Nedpfx Aksyu S Afocjla

Condition: like new (used), Cantilevered construction for long goods. Profiles are made of solid IPE steel. Nodpfx Akeyiat Eocsla Double-sided rack with 6 supports and 48 arms 3 sets available Price: €7,500 per set Length per arm: 1,500 mm Load per arm (IPE 140): 1,500 kg Load per upright (IPE 270): 6,000 kg

Condition: like new (used), Almost new cantilever racks, single- and double-sided, available from stock. Loading marks may be visible on the system. Available quantity: 20 pcs System dimensions: Arms: base + 5 arms, 80 cm long Load capacity: 160 kg/upright Nlsdsxcn Ekspfx Akcsa Uprights: 4 pcs, 2500 mm high, 90 cm upright spacing Load capacity: 1000 kg/upright Total system length: 3300 mm Total system depth: 1100 mm Single-sided: 1090 EUR Double-sided: 2000 EUR

Condition: good (used), Year of construction: 2012, Pallet shifting rack system, Bito, approx. 8m height, 900kg per pallet, 3.60m beams, approx. 2,684 pallet spaces – used – : Price incl. mobile bases and mesh decking: only €99,500 (net), dismantled, packed and loaded! Price as a standard pallet racking system (without mesh decking) ex site: only €32,500 (net), dismantled, packed and loaded! Please note that if sold as a standard racking system, the base plates must be purchased separately from the manufacturer (not included in the price). Price per mesh decking panel (2 required per level): €49 (net)! Price for larger quantities: on request! Manufacturer: BITO Type: P5 Year of manufacture: 2012 Frame height: approx. 7.50m – 8m Number of frames: approx. 136 pcs Frame width: approx. 12cm Frame depth: 1.20m Frame bracing: bolted Shelf load: max. 3,600kg Bay load: max. 18,000kg with shelf spacing: SS1: 1,250mm / SS2: 1,250mm Bay load: max. 10,200kg with shelf spacing: SS1: 1,850mm / SS2: 1,900mm Beam type: PT 150 S = beam height: approx. 15cm Bay width: 3,600mm Beam depth: approx. 5cm Number of beams: approx. 1,092 pcs Mobile bases: 6 units for double rows (serving 12 rows of 7 bays each total). Nedoylnvvjpfx Akcola Carriage load (total): max. 43,200kg Carriage length per base: approx. 26.30m Carriage width per base: approx. 2.50m Price includes personnel protection system Lowest level fitted with continuous mesh decking System setup as follows: 1 fixed double row, 3 mobile bases, 1 fixed double row, 3 mobile bases, and finally a single row 2 remote controls for aisle operation Condition: good – very good Available from: March 2026 Location: Frankfurt am Main area

Condition: good (used), Year of construction: 2019, Racking Hall consisting of cantilever and pallet racks, OHRA, floor area approx. 867m² – used –: Price ex location: €99,500 (net), for self-dismantling! Price for dismantling available on request. Material to close one gable side is also available at extra cost! Manufacturer: OHRA Year of manufacture: 2019, sheet metal 2021 Hall dimensions: Width: approx. 17.35m Length: approx. 50m Height rack: approx. 6,385mm Ridge height: approx. 7.10m After disassembly, one long side of the hall remains open (where it currently adjoins the existing building) Cantilever racking: 2 rows of 25 double-sided frames each = total 50 double-sided cantilever rack frames Arm length: 1.20m Arm load: 1,400kg Load center: 600mm Post load per side: 4,200kg Axle spacing: 2m Arms are plugged in Arms have load deflectors, preparation for unrolling protection Incl. pallet beams Base level plus 3 arm levels per side Total depth: 2.70m (2 x 1.20m plus 30cm frame) Aisle width: 3.25m K-Foot-60-IPE 300-1200-1200-RS-A-RAL K-Roof arm-K60-IPE 120-2750-S6°-PW4-A-RAL Njdpfxjyk H Rij Akcsla Pallet racking: Manufacturer: OHRA System: pallet racking P3 Year: 2019 Bay width: 2,900mm, four bays at length 2.40m Bay load: 2,000kg Field load: 6,000kg Top edge 1st support (buckling length): 800mm 1 row with 17 frames, 1 row with 19 frames (there are pipes at two locations) Number of frames: 36 Rack length: approx. 48.10m Frame depth: 1.10m Frame width: approx. 10cm Beam height: approx. 10cm Beam thickness (bearing surface): approx. 5.5cm Beams: IPE Floor plus 3 beam levels Number of beams: approx. 162 pcs at 2.90m and approx. 24 pcs at 2.40m length Snow load zone: 1 (0.65kN/m²) Wind zone: 1 / Terrain category 0.48kN/m² Available: immediately Condition: good, slight rust on outer frames and faded paint Location: Hockenheim region Drawing available as PDF, parts list, structural calculations. The sideloader shown in the photos is also for sale at extra cost (it recently received a nearly new battery for approx. €9,600 net).

Condition: new, Year of construction: 2026, Approx. 360 starter bays (more available on request), boltless shelving racks, plug-in system, manufacturer: dalminels, dimensions: 1.30m x 0.60m (other sizes available), frame height: 2.20m (other heights available) – New equipment: Price per starter bay: €119 (net) Price per extension bay: €99 (net) Purchase only by the truckload, otherwise the transport costs may be disproportionately high! Approx. 360 bays fit per truckload (depending on configuration). Manufacturer: dalminels, Italy Model: Errex Year of manufacture: New Finish: Galvanized Frame height: approx. 2.20m (other heights, e.g., 2m available on request) Load capacity per level: 141 kg 5 shelves per bay – additional shelves available at extra cost Shelves approx. 1.30m x 0.60m (shelves consist of 3 panels, each 20cm deep) This system features shelves that slot into rails on the sides. Condition: New delivery time: approx. 4 weeks, usually faster – please inquire for current lead times! Location: Delivery included within Germany Other shelf sizes available on request: For example: Widths: 1m and 1.30m Depths: 30cm / 40cm / 50cm / 60cm / 70cm / 80cm Accessories available at extra cost: e.g., drawers, dividers, bracing beams as an alternative to cross braces, etc. Also available as multi-level installations! Nlsdoyhxmnspfx Akcea