Used Die Casting Machine for sale (67,234)

Condition: ready for operation (used), - USED - CNC DIE SINKING EDM Lhjdpjyvlxwefx Akqsf X-AXIS TRAVEL: 400 mm Y-AXIS TRAVEL: 300 mm MAX ELECTRODE WEIGHT: 100 Kg MAX  PIECE WEIGHT: 800 Kg MAX C-AXIS WEIGHT - STATIC/DYNAMIC: 50-10 Kg MAX PIECE SIZE: 220 x 400 x 220 mm TANK SIZE: 900 mm TABLE SIZE: 550 x 400 mm TOOL MAGAZINE: 5 POS CONTROL UNIT: TECHNO 60 WEIGHT: 3000 Kg

Year of construction: 2004, condition: ready for operation (used), Ultrasonic die polishing machine / Wire drawing machine Esteves-DWD 107D16 Year of manufacture: 2004 230 V 20 kHz 4–6 bar Lhjdpjyxxy Hjfx Akqsf

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Lhedjhmmfkjpfx Akqsf Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 52EHD146827, Hello, We are selling a Kluge platen press. This machine is capable of hot foil stamping, die-cutting, embossing, and debossing on paper and board up to over 3 mm thick. Maximum sheet size with automatic feeder: 356 x 559 mm Without feeder: 431 x 628 mm Lodpfxow Udy Ne Akqehf The machine is in perfect working condition and remains in daily production. The heating plate is new (worth €5,000). Kluge is still in operation as a company and can provide comprehensive training if needed. Feel free to contact me for more information.

Condition: ready for operation (used), functionality: fully functional, SASPI GV4-30 Min / max threaded diameter M4 / M14 Ledpfx Aksw Uhrijqjhf Min / max threaded length 10-150 mm Motor power (ca) 32 kW Production speeds (ca) 50-200 parts/min Ready for production!

Year of construction: 1975, condition: good (used), functionality: fully functional, Heidelberg Cylinder SBG 57x77cm ref 2977 Max sheet size: 56 x 77 cm Automatic feeder Good working condition. Ljdjyyaxmjpfx Akqohf Available immediately.

Condition: used, Measuring and marking plate cast steel gray cast iron heavily ribbed STIEFELMAYER from a measuring or scribing machine with hand-guided measuring arm Machine. No. 8530979 Year of construction approx. 1989 length 3000 mm Width 1500 mm Thickness 360 mm Working height 690 mm panel thickness 70 mm throughout - surface machined laterally at a 90° angle 3000 x 360 mm - 6 height-adjustable feet Ledpfx Asdzqpzokqehf - plus 1 measuring arm, mechanical and electrical without function the measuring range is approx. X = 2350 mm, Y = 1250 mm, Z = 1300 mm space requirement L x W x H 3000 x 2000 x 2500 mm weight approx. 5000 kg very good surface

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Lhodpfx Akjwbvmijqjf Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Ljdsthuzpopfx Akqohf Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Measuring machine with manually operated measuring arm STIEFELMAYER Measuring and marking plate made of cast steel/grey cast iron, heavily ribbed High-precision measuring plate with quality surface finish Ljdpfx Akopwpxcoqehf Year of manufacture: 1985 Length: 2000 mm Width: 1500 mm Thickness: 350 mm Plate thickness (top): 50 mm solid material with 300 mm ribs Working height: approx. 800 mm - with manually movable measuring arm, measuring range X=1490 mm, Y=1000 mm, Z=1250 mm - with 3-axis digital readout Grundig MZ 1030 - machined side surface at 90° angle to the table top, 2000 x 350 mm - 5 height-adjustable feet Required space (L x W x H): 2000 x 1500 x 2500 mm Weight: approx. 2600 kg In good condition

Year of construction: 2002, condition: ready for operation (used), An Edelmann converted from a gravure printing machine into a rotary die-cutting machine is available. Principle: inline web processing with sheet stacking, materials: paper/cardboard/labels/die-cut parts, tool mounting: die-cutting plates, tool holder: magnetic cylinder, magnetic cylinder circumference: 24in, tool cassette: 12in, web width: 485mm, max. material width: 485mm, material weight range: 35-170g/m², max. roll diameter: 1200mm, max. production speed: 200m/min, production steps: roll-rotary die-cutting/cross-cutting/high-pile delivery. The machine ran little and is in as-new condition. Documentation available. An on-site inspection is possible. Lhodpfxjyt N Dks Akqjf

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total height: 3,100 mm, total width: 3,100 mm, stroke length: 950 mm, column diameter: 130 mm, mold height (min.): 900 mm, clamping force: 35,000 kN, pressure: 400 bar, Installed and commissioned with dry, test run only. - Two‑platen machine - Max locking force: 35,000kN - Injection force: Approx. 390–420kN (varies by plunger size) - Plunger diameter: Ø130mm - Plunger stroke: 950mm - Shot weight (Al): 6.5–8.5kg, depending on plunger - Projected area at 400 bar: 8,750–9,000cm² (calculated from 35,000kN clamping force) - Platen size (H × W): 3100× 3100mm - Distance between tie bars (H × W): 1950×1950mm - Die height (min / max): 900/1350mm - Die opening stroke: 1200mm Støtek melting system with - Støtek SMG 3.0_7.0 two chamber gas fired melting shaft furnace with ingot charging elevator, furnace melting capacity approx. 1.5t/h - Støtek DTI 6020 holding furnace with Fuco-Heg MBS 2000 molten metal treatment/rinsing station - Støtek AMET 1700 dosing furnace LK Impress Plus DCC 3500 die casting machine with - Siemens PLC S7-1500 controls - ABB IRB 6650S die release agent spray robot - Wollin OSA 15-2-C die release agent supply system and spray head - AED 181-080 die lubrication dilution system - Fondarex Highvac Premium 2C 200 die casting vacuum system with air tank and vacuum pumps - 5x IECI PFN 330 2-Z oil temperature control units - 5x IECI PF-ZH 1802-Z water temperature control units - KMA Ultravent UV 20000EE fume extraction and filter system - ABB IRB 7600 robot for die casting machine unload, trim press load/unload and cooling station load Lsdpfoygxr Rsx Akqjhf - LK WB-100 1,000kN trim press with trim conveyor - ABB robot for cooling station unload, laser marking and outfeed - Keyence MD-X 1500C 3 axis laser marking system - Outfeed conveyor with cooling tunnel A quantity of spare parts is available with the line.

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Lodpfx Aev Nzpgokqjhf Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), nominal power: 7.5 kW (10.20 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 4,600 rpm, input frequency: 50 Hz, input current: 30 A, type of input current: three-phase, overall weight: 8,200 kg, total length: 3,320 mm, total width: 2,440 mm, total height: 2,130 mm, grump will follow shortly Lhedpfx Aswvbm Rokqsf

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm Lsdpfsx Ndu Dox Akqjhf - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: used, URANIA DSK Maximum paper size: 80 × 112 cm Ledpfx Akow R Eqbjqohf Minimum paper size: 30 × 42 cm • Frame opening (normal): 78.5 × 108.5

Condition: excellent (used), Year of construction: 2019, operating hours: 4,247 h, functionality: fully functional, machine/vehicle number: T1284, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 370 mm, total height: 2,570 mm, total length: 1,852 mm, total width: 2,825 mm, workpiece height (max.): 400 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, type of input current: three-phase, table width: 750 mm, overall weight: 5,350 kg, table length: 550 mm, table height: 400 mm, empty load weight: 5,350 kg, table load: 1,500 kg, input voltage: 400 V, input frequency: 50 Hz, The Sodick AG60L die-sinking EDM was manufactured in 2019. It features a ceramic table measuring 750 x 550 mm and can handle a maximum workpiece weight of 1,500 kg. The machine is equipped with a linear motor, glass scales, and a remote control unit, which enhance both precision and operator convenience. We invite you to purchase the Sodick AG60L die-sinking EDM. Please contact us for further details about this machine. Axis travel (X/Y/Z): 600 / 420 / 370 mm Lhsdex Ekb Nepfx Akqof Equipment includes: replaceable paper filter, SEC-10 (C-axis), SGF2 Nano Wear Unit, fire extinguisher, TMM3 Power Generator, dielectric cooling unit, 15" TFT touchscreen, linear motors (X, Y, Z axes), glass scales (X, Y, Z axes), ceramic work area, remote control. Machine dimensions (LxWxH): 1852 x 2825 x 2570 mm / Machine weight: 5,350 kg Max. workpiece weight: 1,500 kg / Ceramic table size (W x D): 750 x 550 mm Distance floor-to-table: 850 mm / Max. electrode weight: 50 kg Dielectric fluid level (min-max): 150 – 400 mm / Dielectric capacity: 465 liters

Condition: like new (used), Year of construction: 2025, CARLO SALVI 476 SV revised to new 4,76x45 mm. 450 ppm - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings Lhsdpfx Aoh N Di Dokqjf Available in CALOLZIOCORTE (LC) c/o HBR srl. HBR will provide to the total revision.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 527, Price for the machine: 214,500 EUR Lhedpfxsu Ivc No Akqef Price for the tools: 97,500 EUR

Condition: good (used), Automatic die-cutter Bobst SPO 1575 EEG ref 2925 Lhodpfeytuxgsx Akqsf Year – 1966, machine modernized in 2008 Max sheet format – 1055 x 1575 mm Min sheet format – 400 x 600 mm Max mechanical output – 4500 sheets/h Max pressure – 350 t Vacuum feeder Stripping section Waste removal by bar Batch delivery Attractive price for quick sale

Year of construction: 2010, operating hours: 33,000 h, condition: excellent (used), Sanwa TRP 1060 Axia ref 2962 year 2010 max sheet size 740 x 1060 mm operating hours – 32,000 h cleaning section NON Stop at feeder register control R, L Lhodpeytudcsfx Akqsf motorized impression setting

Condition: used, Year of construction: 1998, machine/vehicle number: 22406695, travel distance X-axis: 992 mm, travel distance Y-axis: 807 mm, travel distance Z-axis: 561 mm, workpiece length (max.): 1,260 mm, workpiece width (max.): 1,060 mm, workpiece height (max.): 550 mm, input voltage: 400 V, input frequency: 50 Hz, We are offering this used AEG Elotherm P1 sinker EDM machine, year of manufacture 1998. Type: P1 Serial number: 22406695 Order number: 704.1177 Voltage: 400 V Current: A Frequency: 50 Hz Switch-off method: Plan: Year of manufacture: 1998 Lhedpfx Aeypln Djkqsf If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Press Machine, Traveling Head Cutting Machine, Punching Machine, Stamping Press, Hydraulic Gantry Press,Sanson Chiesa Turbo, Used Machine Ljdpfsukpcysx Akqehf Manufacturer: Sanson Model: Chiesa Turbo Overall Dimensions: 3480 x 1040 x 2420 mm Weight: 5500 kg Electrical Data: 380V, 50 Hz Working Cylinder Diameter: 250 mm Operating Pressure: 200 bar Stroke Length: 120 mm Pressing Surface: 900 x 1000 mm Cutting Table: 1040 x 2500 mm

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Lhsdpexpqy Defx Akqof Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Ljdpsw Iq Ugjfx Akqehf Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition