Used Flow Controller, Water Battery for sale (50,457)

Condition: used, Year of construction: 2010, operating hours: 10,409 h, functionality: fully functional, working range: 2,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6,000 bar, operating pressure: 6,000 bar, input current: 120 A, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, year of last overhaul: 2026, water pressure: 6,000 bar, pump pressure: 6,000 bar, working length: 4,000 mm, input frequency: 50 Hz, We offer this used Flow FLOW Mach 4 4020b waterjet cutting system, year of manufacture 2010. Dynamic XD | 100 HP HyperJet | NEW Drive Retrofit 2026 Manufacturer: Flow Model: FLOW Mach 4 4020b Year: 2010 Machine Description For sale is a high-performance and freshly serviced precision waterjet cutting system from the global market leader FLOW, model Mach 4 4020b. This system is equipped with Flow’s high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. Special highlight for buyers: In January 2026, the manufacturer (Flow Europe GmbH) carried out a comprehensive technical service. An official drive controller retrofit kit was installed (approx. €18,000 incl. installation). As original replacement controllers for this model year are often no longer available, this upgrade offers long-term spare parts availability and modernized electronic control. A test cut was successfully carried out following the retrofit. Technical Data • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with automatic angular error correction) was used by us only for automatic angle compensation • Abrasive system: Flow Paser 4 • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 HP / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Electrical requirements: 400V, 50Hz, 3-phase (120A full load) Condition & Equipment Lhjdpfoywtitjx Akqof • Technical condition: Immediately operational • Maintenance history: Current technical service report from the manufacturer available (January 2026) • Upgrades: New drive controllers (retrofit kit) and overhauled wiring on C-axis • Productivity: The 6,000-bar technology enables up to 50% faster cutting compared to standard systems Inspection & Transaction • The system is currently still connected and can be viewed and demonstrated under power • Location: 78549 Spaichingen (Baden-Württemberg), Germany • Viewing can be arranged at short notice by appointment Scope of Delivery • Flow Mach 4 4020b waterjet system • HyperJet 100 high-pressure pump • Control terminal including software • Technical acceptance report / service report from 01/2026 • Abrasive system: Flow Paser 4 Legal Notice (B2B): Sale only to commercial customers. Warranty, liability for material defects, and returns are excluded. Sold as seen/tested. All information is provided without guarantee, subject to errors and prior sale. If you have any questions or require further information, please feel free to contact us via message or by phone.

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: B1JAU25/95, DN400 Ball Valve Assembly + Pneumatic Actuator (Valmet / Neles) 1) Description Manufacturer: Valmet Flow Control (Neles brand) Valve: M1JW400ASGA – Trunnion-mounted ball valve, PN10, DN400, body CF8M (AISI 316), graphite packing Actuator: B1JAU25/95 – Single-acting pneumatic actuator (spring to open), ISO 5211 / VDI/VDE interface, size 25, shaft bore Ø95 mm Mounting Plate: QX35K05HDM – Neles interface for valve/actuator coupling Year: 2023 Condition: New / never installed, stored in original wooden crate (photos available) Compliance: CE marking (ATEX if applicable to control accessories – see nameplate) Ledeyhxppepfx Akqehf 2) Construction & Materials Body: Stainless steel casting 1.4408 / CF8M Type: Trunnion-mounted quarter-turn ball valve (low operating torque, low ΔP) Seats / Packing: Graphite (for severe service, high temperature resistance, low friction) Flanges: industrial drilling (details available on request) 3) Performance (indicative / to be confirmed by serial datasheet) PN: 10 (body marked PN16 on associated part; can be delivered as PN10) Nominal diameter: DN400 Service: industrial fluids, air/gas, low-pressure steam, chemical/energy process, heavy-duty HVAC Mounting: single-acting actuator (spring fail-safe → opens in case of air supply failure) 4) Scope of Supply Complete pre-assembled valve with B1JAU25/95 actuator QX35K05HDM mounting plate Control block (solenoid valve/filtration/regulation) visible in the photo Wooden crate + protective materials 5) Applications Compressed air units / boosters (line isolation/bypass) Industrial processes (chemicals, energy, paper mills, incinerators, cement plants) Large flow industrial HVAC networks

Condition: excellent (used), Item: D-10800-BacTerminator BacTerminator BTM10FD11001 Water Disinfection Equipment Lsdpfx Akoh Dxqveqohf Inclusive pumps, Control and other accessories. Nice condition

Condition: not inspected (used), Year of construction: 1994, operating hours: 41,564 h, functionality: unexamined, (Pictures are condition) Lhedpfx Ajguqucskqsf Optional purchase: Current condition = 12.500 € Liability excluded - spare parts, service and maintenance can be offered Overhauled condition = 13.500 € Check of the Intensifier 3 months warranty (not on spare and wear parts) Renewed condition = € 17,999 (refurbish) 12 months warranty (not on spare and wear parts) New pressure intensifier, new control unit, new HP pump, hydraulics cleaned and checked. we offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed Lhodjnab Rzspfx Akqof - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Lhedsyr H Anjpfx Akqef Permeate quality:

Condition: good (used), Year of construction: 2002, functionality: fully functional, Waterjet Cutting System IR Manufacturer: WATER JET Ingersol Rand Model: OEM 30 Serial number: 0211141 Year of manufacture: 2002 Control system: TH 2030, new and never used Pump has been fully overhauled Working area: 3000 x 1500 mm Max. working pressure: 60 KSPI Lhedpsyrfg Eofx Akqjf Operating voltage: 400 V Control voltage: 24 V Main fuse: 63 A Rated current: 55 A Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Working area 4000 x 2000 mm Lhjdjykulnspfx Akqsf Cutting power 4000 bar

Condition: used, Year of construction: 2021, machine/vehicle number: 70602008, High-performance industrial vacuum evaporator designed for the treatment and volume reduction of industrial wastewater and process liquids. This system uses heat pump technology combined with vacuum evaporation to achieve efficient distillation at low temperatures. Technical Specifications:Capacity (distillate production): approx. 12,000 – 12,700 L / 24 h Technology: Heat pump vacuum evaporation Operating mode: Fully automatic continuous operation with PLC control (Siemens) Refrigerant: R134a Installed power: approx. 114 kW Operating temperature: 35 – 45 °C Distillate temperature: 37 – 47 °C Concentrate temperature: 35 – 45 °C Operating pressure: 6 – 8 kPa (vacuum) Dimensions and Weight Total length: approx. 5600 mm Total width: approx. 1500 mm Total height: approx. 3800 mm Weight: approx. 4,000 – 5,000 kg Lhodjyu Sfajpfx Akqof Condition: Used – very low operating hours. EVALED AC R 6 (vacuum evaporator / crystallizer “R” scraped type) is about 6 t/day class. Veolia EVALED AC R6 FF3 Vacuum Evaporator / Crystallizer – Wastewater Treatment

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material: 1.4408 stainless steel -without: drive -Connection: DN50 -Width: 152 mm -Nominal pressure: PN40 -Number: 1x valves available -Price: per piece -Weight: 9.69 kg/piece Ljdpfxjdki Rto Akqshf

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert Lodpfevvl Ugsx Akqohf -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Year of construction: 1988, condition: ready for operation (used), A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible. Lodpfx Aevmq Tiekqehf

Year of construction: 2017, condition: ready for operation (used), Cutting heads: 2, cutting head type: AWJ 2D, abrasive feed: system SM4000, pump type: KMT Streamline SL-VI Standard, max. pump pressure: 3800bar. Table dimensions X/Y: 3200mm/1710mm, cutting dimensions X/Y: 3010mm/1510mm, travel range X/Y/Z: 3010mm/1510mm/250mm, travel speed: 12m/min, cutting head distance range: 90mm-450mm, positioning accuracy: +/-0.075mm, repeatability: +/-0.035mm, control: Fanuc 0i-MF, operating hours: 4866h. Includes oil cooler, water treatment, and safety zone. Documentation available. On-site inspection possible. Lsdpfx Asxp Rcfjkqjhf

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 Lodpfx Aox H Rtnokqshf - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: DC, warranty duration: 24 months, compressed air connection: 2 bar, overall weight: 20 kg, filling weight (max.): 1,000 g, filling weight (min.): 100 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: new filling machine suitable for dispensing liquids, pastes, and semi-viscous products, such as: - Disinfectants - Shampoos & lotions - Creams - Honey & jam - Milk & yoghurt - Water & alcohol - Sauces (e.g., pesto) - Etc. Simple, reliable, and immediately deployable This filling machine operates on compressed air and 220V and is fully plug & play. As a result, the machine is very user-friendly and particularly suitable for filling small to medium-sized batches. A small compressor is sufficient to run the machine; one can be supplied if desired. Ledperivwfsfx Akqshf Flexible filling (100 – 1000 ml) The machine is equipped with a 1000 ml cylinder, allowing for a maximum of 1000 ml to be filled per cycle. - Minimum fill quantity: 100 ml - Any quantity between 100 and 1000 ml can be dispensed in a single stroke - Larger volumes can easily be achieved by multiple cycles Large hopper & expansion options Standard supplied with a 30-liter stainless steel hopper. There is also the option to connect to an IBC container or 200-liter drum, enabling quick and efficient handling of larger filling volumes. Manual or automatic operation The machine offers: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher volumes Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high-quality construction - Weight: approx. 15–20 kg - Easy to place on a table - Fully made of high-grade stainless steel - Robust, industrial build quality More information For questions, feel free to email us; we are happy to assist you with this or other machines. Additionally, we also offer a labeling machine, which is an excellent combination with this filling machine for a complete filling solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, total width: 42 mm, total length: 101 mm, total height: 67 mm, compressed air connection: 2 bar, overall weight: 17 kg, filling weight (max.): 500 g, filling weight (min.): 50 g, input voltage: 230 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: New filling machine suitable for precise dispensing of liquids, pastes, and semi-viscous products. Suitable applications include: - Disinfectants - Shampoos & lotions - Creams & gels - Honey & jam - Milk & yogurt - Water & alcohol - Oils & sauces (such as pesto) And many other products Reliable, simple, and efficient This machine operates entirely pneumatically and requires only compressed air. As a result, it is very low-maintenance, reliable, and immediately ready for plug & play operation. A small compressor is sufficient to operate the machine; a compressor can be supplied upon request. Flexible fill volume The filling machine is equipped with a 500 ml cylinder, allowing a maximum of 500 ml to be dispensed per stroke. - Minimum fill quantity: 50 ml - Any volume between 50 and 500 ml can be dispensed in a single stroke - Larger volumes are easily achievable by conducting multiple strokes consecutively Lsdpfx Akoyfg Scoqjhf Large hopper & expansion options The machine features a 30-liter stainless steel hopper. It can also be connected to an IBC container or 200-liter drum, allowing for swift and efficient processing of larger filling batches. Manual or automatic operation The filling machine comes with: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher throughput Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high quality - Weight: approx. 20 kg - Easily placed on a table - Fully constructed from high-grade stainless steel - Excellent industrial build quality Interested or have questions? Do you have questions or would you like more information? Please feel free to contact us via email — we are happy to assist you. We also offer a labelling machine that combines perfectly with this filler for a complete filling line solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Condition: good (used), Record Scorpion E Flow Wrapper Lhedjwd Sh Uopfx Akqsf Year: 2001 Packages up to 80 products per minute, depending on product. Reel dimensions: 520mm Jaws: 250mm x 150mm Up to 30 programmable products

Condition: excellent (used), Year of construction: 2014, Ilapak Smart Flow Wrapper Zodiac coder Suitable for clear or printed film In everyday use Lsdpfx Akswttcxeqshf Adjustable infeed box In excellent condition

Condition: good (used), Year of construction: 2011, Fuji Flow Wrapper High speed horizontal form- fill - seal machine Type: FW3410/B Year of construction: 2011 Zodiac HC terminal printer 200 V, 3 Ph, 50/60 Hz, 30 A Lhsdov T D D Uspfx Akqjf Belt width: 250 mm, seal length: 300 mm Dimensions: 3360 mm x 1200 mm x 1900 mm.

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Lhodpfx Aexhfl Eekqjf Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: used, This listing is for the Veolia/Elga PC1ANRXM2 Purelab Chorus The unit is in full working condition and is ready for immediate release The Veolia ELGA PURELAB Chorus 1 Complete is a high-performance water purification system engineered for laboratories demanding the highest water purity. It is ideal for supporting analytical research, quality control (QC) testing, and pharmaceutical manufacturing processes, delivering reliable Type I ultrapure water. Key Specifications Water Quality: 18.2 MΩ·cm resistivity (Type I) Flow Rate: Up to 20 litres per hour Features: Lhodpfx Akoxv A Uasqjf Advanced PureSure® deionization for consistent water quality Fully recirculating system to maintain microbial purity Real-time TOC monitoring to ensure organic purity Integrated filtration for endotoxins, proteins, particulates USB data capture for performance validation Optional ELGA Biofilter for biologically active impurities Cost-effective design supporting QC testing to validate drug purity in pharmaceutical manufacturing Consumables engineered to minimise cost and environmental waste Ideal Applications Analytical Research Life Sciences Pharmaceutical QC Testing Glassware Washing and Ultrapure Feed Systems

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm Lhodpfx Akexgua Asqef 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: Lhedsxgumcjpfx Akqof - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted - Pump optionally available Lhjdenab Siopfx Akqof - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) Lhodponab Rlofx Akqsf - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!