Used Lugli 60/C for sale (67,492)

Condition: ready for operation (used), Bosch VM 60-C supply module, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Pgodei D Uhgopfx Amijk

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Pgjdpfxoh Nypfs Amiok

Condition: excellent (used), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum specimen weight: 20 kg Test chamber volume: 60 liters Test chamber internal dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply connections to the specimen SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg Important information for your safety as a buyer! The following points are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to change or error!) Pedpfx Amsx Hglyeiegk Should you have any further questions, we are happy to answer them by phone.

Condition: used, Year of construction: 2016, x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm Control iTNC 530 HSCI Heidenhain distance between columns max. 5.090 mm distance spindle center to table 1.825 mm type 175149A-0007 turning speed range - main spindle max. 19.800 min/-1 power capacity - main spindel 20 kW tool taper HSK-A63 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° type 178099-0005 turning speed range - main spindle max. 10.020 min/-1 power capacity - main spindel 20 kW tool taper HSK-A100 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° table surface area 6.000 x 3.000 mm max. table load 50,0 t height over floor 100 mm number of T-slots 12 T-slot - width 28H12 mm T-slot - distance 250 mm number of toolpositions 62 (38+24) pos. number of toolpositions HSK A63: 37+1 pos. number of toolpositions HSK A100: 23+1 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 mm max. tool weight HSK A63: - kg max. tool diameter HSK A100: 80 mm max. tool length HSK A100: 450 mm max. tool weight HSK A100: - kg rapid traverse ( X / Y / Z ) 40.000 mm/min rapid traverse B/C: 4.320 °/min feed speeds X/Y/Z: 30.000 mm/min Working speed B/C: 2.160 °/min Accelaration max. 3,2 m/s² x-axis 6.800 mm y-axis 4.000 mm Pgsdpsx Avqbofx Amiok z-axis 1.500 mm b-axis +115° / -115 ° c-axis +/- 200 ° total power requirement 180 kVA dimensions of the machine ca. 12,5 x 15,0 x 7,0 m 5-Axis-High-Speed-Gantry-Big-Machining-Center DROOP & REIN - FOGS 40 60 C - Fork head

Condition: as good as new (ex-display), functionality: fully functional, Ferwood Code: RS0003209 - Manufacturer Code: AS42150015 - Condition: Like new (display item) - Functionality: Fully functional - Compatible Machine: CNC BIESSE ROVER - EXCEL - KLEVER - If interested we offer an overhaul service, contact us. Podpjv Azctjfx Amisgk

Condition: new, pressure: 60motor: 11daylight: 450stroke lenght (max.): 400table diamension: 600 x 500 x 80tappet area: 600 x 500 x 90table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.700weight approx.: 4.000oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 150mm. Auxiliary cylinder: 2 pcs. Ø 60 x 40mm. Auxiliary guide: 2 pcs. Ø 40mm. Motor: 7,5kw. - 11hp. ( IE-3 ) Pump: 18cc. - 26Liter / ASC. Speed : flow 110mm./sec. - return 120mm./sec. - Pressure : 11mm - 5./sec. Installation height: 500mm. Stroke length: 400mm. Table top: 600 x 500 x 80mm. - (with T - grooves) Plunger plate: 600 x 500 x 90mm. - (with T - grooves) Podommuq Iopfx Amiogk Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 7 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, functionality: fully functional, working width: 510 mm, area performance: 2,040 m²/h, overall weight: 112 kg, input voltage: 230 V, water tank capacity: 60 l, Technical specifications: Condition - NEW! Catalog number: 1.127-002.0 Power supply: 230V cable Drive: Propulsion via brush rotation Brush working width (mm): 510 Suction working width (mm): 900 Fresh/dirty water tank capacity (l): 60 / 60 Theoretical cleaning capacity (m²/h): 2040 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 27.3 – 28.5 / 20 – 23 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 67 Color: anthracite Total weight with water (kg): 112 Weight without accessories (kg): 52 Dimensions (L × W × H) (mm): 1170 × 570 × 1025 Scope of delivery and equipment: 900mm V-shaped suction bar with oil-resistant polyurethane rubber pads 510mm red disc brush - medium-hard Features: Pgsdpfjya Et Usx Amisk 2-tank system Advantages: - Self-explanatory symbols and clear control panel. Solenoid valve for automatic water shut-off after releasing the dead man's switch. Easy operation thanks to a few yellow-coded controls. - Highly maneuverable and easy to handle. Excellent visibility of the area to be cleaned. - Designed for daily use. Robust, durable, and reliable machine. Key features: - Options for attaching hooks, containers, mops, etc. - Additional cleaning supplies can be carried. - Excellent value for money.

Condition: used, load capacity: 6,000 kg, lifting height: 3,600 mm, free lift: 1,120 mm, mast type: triplex, construction height: 2,200 mm, fork carriage width: 1,530 mm, fork length: 1,600 mm, empty load weight: 11,995 kg, total length: 30,000 mm, drive type: Elektro, construction width: 1,540 mm, Electric 4-wheel forklift Load center: 600 Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Technical condition: Good Front tires type: Non marking Rear tires Type: Non Marking Hydraulic sideshift with fork adjustment ( opening dimension of the forks: Inner edge - inner edge = 50 mm to 1,140 mm ) Podpfjt Ddvzex Amijgk

Condition: new, Year of construction: 2025, power: 5.5 kW (7.48 HP), pressing force: 60 t, table width: 590 mm, table length: 800 mm, punching force: 60 t, drop-through hole in table: 140 mm, ram bore: 40 mm, stroke adjustment: 100 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 60 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for serial production. Key advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement through centralized automatic lubrication - Production-ready operation with PLC control + dual hand/foot control Areas of application: - Cold cutting and punching operations - Cold blanking applications Podjvtx D Nepfx Amiogk - Metal die forming - High volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-way guided slide • Spheroidal cast connecting rod and gear housings • Crankshaft and drive shafts in 4140 tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual coil safety valve • Manually adjustable stroke • Finger/hand protection safety system with light curtain • PLC control system • Dual hand/foot control system • Mechanical locking system • Emergency reverse motor function • Conforms to occupational safety regulations • Compatible with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch screen LCD display (standard for 150–300 tons) • Hydraulic locking system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder and straightener • One custom die set as requested • 8-point slide guide ✅ TECHNICAL SPECIFICATIONS (60 TON) Capacity: 60 Ton Throat depth: 260 mm Table-to-ram distance: 360 mm Slide-to-table distance: 395 mm Distance between uprights: 380 mm Ram adjustment (stroke adjustment): 70 mm Approx. press width: 1340 mm Approx. press depth: 1450 mm Approx. press height: 2200 mm Front anchor dimension: 630 mm Side anchor dimension: 875 mm Table hole diameter: Ø150 mm Table size: 520×720 mm Die mounting slot diameter: Ø40 mm Ram size: 340×220 mm Table height from floor: 730 mm Stroke adjustment: 0–95 mm Strokes per minute: 50 spm Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2750 kg Note: Please contact us if you need modifications to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg Pgedpfxoyfhiij Amiek ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2010, RHV-C&V GmbH & Co. KG glass jar capper type: LW560 serial number: 10172/4184 year of construction: 09/2010 stainless steel conveyor belt, belt width: 120 mm Pgedpfx Amoyxgxweiek

Condition: good (used), Technical data for the pallet rack beam: Racking system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x pallet rack beam, used Material color: yellow Box profile: 60 x 40 mm Psdpfxjynlrae Amisgk Beam type: TRV1-270-064-30 CE Clear span: 2,700 mm Bracket: 5 HK (hooks) 02x safety pins, used Design: fully galvanized For securing the cross beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping is desired, additional costs will apply. These can be requested from us separately depending on the delivery location and scope of delivery.

Condition: excellent (used), High-quality and very clean condition – well maintained automatic shrink wrapping line consisting of Lady Pack Auto 60 shrink wrapping machine and Madax shrink tunnel. This is a reliable industrial packaging solution suitable for a wide range of products including boxes, printed materials, cosmetics, food products, and general consumer goods. The machine offers automatic operation, making it ideal for efficient and consistent packaging in production environments. Main features • Manufacturer: Lady Pack (Italy) • Model: Auto 60 • Automatic shrink wrapping machine • Included shrink tunnel: Madax • Complete packaging line • Industrial quality construction • Easy operation and maintenance Condition The machines are in good working condition. Previously used in production and well maintained. Logistics Machines are available for immediate pickup. Loading assistance available. Located in Finland. Additional information • Suitable for industrial and commercial packaging • Reliable and proven technology • Compact and efficient line. Higher capacity alternative to semi-automatic machines. Pgedpfxoywpabs Amisk Can be connected and tested before purchase. After all, very clean condition – well maintained and ready for production use. Keywords: Shrink wrapping machine Automatic shrink wrapper Lady Pack Shrink tunnel Packaging machine L sealer

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Pgodpfx Aoyz Ihxomijk

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm material color: sendzimir galvanized total length: approx. 1.865 mm Pgsdpfx Asnbd Uromiok center-center-hole: approx. 1.825 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm Material color: sendzimir galvanized total length: approx. 1.015 mm center-center-hole: approx. 975 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Pedpfx Asnbfapsmijgk Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: excellent (used), Mr: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery: 01x C-profile, II. choice Manufacturer: SSI Schäfer Material color: sendzimir galvanized total length: approx. 1.510mm profile dim.: C 100x60x10 mm material thickness: approx. 3,0 mm Pjdpfxsh T Avxe Amisgk Remark: - Since this is a used product may be damaged, holes, welds or other rust approaches may be present. General information about the item: This item is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Year of construction: 2007, condition: as good as new (ex-display), new Cuenod C 120/160 GX507 industrial gas burner is available for sale Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Minimum power 230 kW The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level of emissions. • The specially designed head contains nitrogen oxides below 80 mg / kWh. • Very low noise level (closed ventilation system). • Ventilation with the RHP® system to optimize the combustion process. • Cubic design with transverse fan. • Shunt for measuring the ionisation current. • AGP® system that provides the perfect air-to-gas ratio, CO2 High during the work cycle and to precisely control the flow of excess air required for optimum operating condensing boilers with maximum efficiency. The net price of commercial customers of EU customers Pgedsd Aqqzepfx Amisk If you need more information. Here we are to help! Please contact us at the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: new, machine/vehicle number: C-CL-360-FR-EC, functionality: fully functional, input voltage: 230 V, volume flow: 390 m³/h, noise level: 58 dB, total height: 1,190 mm, total length: 900 mm, total width: 550 mm, warranty duration: 12 months, Equipment: type plate available, ISI C-CLEANER Psdjvrw T Hjpfx Amiegk Mechanical air filter device Type: 360 FR Design: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating gas and solids. TECHNICAL DESCRIPTION: Air volume: - 390 m³/h (free blowing) - 360 m³/h (effective) (depending on the filter configuration without capture elements) Air inlet: with baffle plate as pre-separator Filter configuration: - Filter cartridge made of polyester fleece (dust class M) - Pre-filter mat G4 - Suspended matter filter H13 - Activated carbon cassette refillable with 3 kg In order to achieve a consistent suction power, the filter cartridge can be cleaned at regular intervals using compressed air via a ball valve. Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 58 db (A)) Dimensions: length 900 mm / width 550 mm / height 1190 mm

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Pgjdpfx Amswc Afheisk Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Pedpfxsviwdme Amijgk Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), CTS Model: CS-70/600-5 Climate Test Chamber CTS CS-70/600-5 Water-cooled version With observation window, test specimen protection, and documentation For sale is a high-quality CTS climate test chamber, model CS-70/600-5, suitable for precise temperature, climate, and stress screening tests in research, development, quality assurance, and industry. The unit is in used condition and can be inspected in detail as shown in the images. Current display: manual operation / stop. Operating hours according to display: Technical Data: - Temperature range: -70 °C to +180 °C - Humidity range: 10% to 98% RH - Dew point range: -10 °C to +94 °C - Test chamber volume: 600 liters - Temperature change rate according to IEC 60068-3-5: Psdpfxoy Hkbls Amiegk - Heating: 6.0 K/min - Cooling: 7.0 K/min - Electrical connection: 400 V 3/N 50 Hz - Nominal power: 14.6 kW - Nominal current: 22.0 A - Protection class: IP 22 - Refrigerants: R404A / R23 - Pre-cooling stage: R404A – 4.5 kg - Cooling stage: R23 – 2.1 kg / 14.5 bar - CO2 equivalent: 17.65 t / 31.08 t - GWP: 3922 / 14800 - Operating overpressure PS: 25 bar - Test pressure PT: 27.5 bar Features / Equipment: - Observation window in the door - Stainless steel test chamber - LED test chamber lighting - CTS LCD control panel with digital controller - Test specimen protection / temperature limiter - Water-cooled refrigeration unit - Automatic water top-up / deionized water inlet - Test chamber and condensate drain - Volt-free contact - Digital outputs - RS232 interface - Ethernet interface - Lateral cable ports Cable ports according to installation plan: - 1x port NW 50 - 2x port NW 125 Test chamber dimensions according to installation plan: - approx. 850 x 850 x 830 mm External dimensions according to installation plan: - approx. 1900 x 1120 x 1875 mm Weight / Mass according to documentation: approx. 750 kg Scope of delivery: - CTS climate test chamber CS-70/600-5 - Including available documentation / test certificates - Delivery includes everything shown in the images Buyer assurance: - The unit can be viewed by appointment. - Loading by forklift can be arranged. - For any questions, please do not hesitate to contact us. Buyer safety information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used (Changes and errors in the technical data reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: C-70/600 CTS Climate Test Chamber C-70/600 Water-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber, type C-70/600, suitable for precise temperature and climate testing in research, development, quality assurance, and industry. The equipment is in used condition and can be inspected fully as per the images provided. Current display shows manual operation / stop, actual temperature 16.59 °C, setpoint 5.00 °C, actual humidity 39.7% r.h., and water reservoir actual value 11.0 l. Pedpfx Amey Hkazjijgk Technical Data: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Nominal power: 8.7 kW Nominal current: 14.8 A Protection class: IP 22 Refrigerants: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration unit for low temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Specifications: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Specimen protection / temperature limiter Water connection / deionized water inlet Test chamber and condensate drain Tubing ports on the side of the chamber RS232 interface as per documentation Digital outputs for specimen control Test chamber dimensions (as per documentation): approx. 850 x 850 x 830 mm External dimensions (as per documentation): approx. 1900 x 1115 x 1850 mm Weight (as per documentation): approx. 600 kg Scope of delivery: CTS Climate Test Chamber C-70/600 including available documentation / operating manuals Scope of delivery as shown in the images For your safety as the buyer: The equipment can be inspected by appointment. Forklift loading can be arranged. Additional assurance for you as a buyer: The following measures are undertaken on all chambers offered: 1. Function check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Subject to changes and errors in technical specifications and details!) For further questions, we are happy to assist you by phone.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Pedpjy Hki Aofx Amiegk Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: good (used), Year of construction: 1994, functionality: fully functional, Pressure: 160 t Psdsxb Sm Nspfx Amiegk Bending length: 3,200 mm Control unit: CYBELEC CybTouch 15 PS Machine weight approx.: 14,000 kg Accessories/Equipment: - Control unit retrofit March 2025 – CYBELEC CybTouch 15 - Foot switch - Tools