Used Fst Dfx55 for sale (73)

Condition: new, power: 368 kW (500.34 HP), axle configuration: 6x2, color: blue, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be pleased to assist you (by phone). Ppjdpfsyhyh Hsx Amior Iveco AS260S50Y/FS CM 6x2 BDF Swap Body Chassis Axle configuration: 6x2P, 3 axles, trailing axle. Cab type: AS MY. Emission level: Europe. Engine: Cursor 13, 500 HP, Euro VIe. Transmission: 12-speed HiTroniX, automated. Permissible gross weight: 26 t. Drive axle variant: SR, single reduction, single axle. Full air suspension. Disc brakes. Steered trailing axle, single tires. Vehicle variant: Container chassis CM. Vehicle set-up: ON. Wheelbase: 4,800 mm. Model year: 2024. Engine speed: 1,650 rpm. Emission standard: EURO VI E. Tires: 315/70R22.5. Speed limiter: 90 km/h. Electrically operated roof hatch (transparent with MLL high roof). Standard black front grille. Manually operated cab tilt. Mirror cams with cover on AS. FHS in vehicle color. Front underrun protection for chassis with a gross weight over 7,490 kg. Plastic bumper. AS high roof cab. Electronic immobilizer and 2nd vehicle key. Dashboard design: plastic with black trim. COC: EC whole-vehicle type approval. Digital tachograph 4.1. Air compressor: 2-cyl., 630 ccm, with integrated clutch, demand controlled. Smart generator 2880 W (24V x 120A), demand controlled. SR-SOLO LIGHT 17x. Rear shock absorbers. Weight variants: front axle 8,000 kg / rear axle 11,500 kg (technically possible: 12,000 kg) / trailing axle 7,500 kg (technically possible: 8,000 kg). Standard overall train brake. Front axle stabilizer. Standard applications. Exhaust pipe outlet to the left. Air filter unit under cab. Lift control for trailing or leading axle (TX/P). Ride height with 2 settings. Rear underrun protection omitted. Trailer version for use with continuous braking system. Rear crossmember, D-value: 130 kN. Trailer socket for 24 volt operation, 15-pin. Rear axle ratio: i = 2.31. Connectivity box 4G incl. TCO service contract. Engine idle shutdown. Tire pressure monitoring system (TPMS), internal sensors. VDI interface for telematics services, version 4.0. Infotainment 10" TFT display. Gearbox software ECO-Roll (coasting function). GPS cruise control Hi-Cruise. Drowsiness warning system (Driver Drowsiness Attention Warning). Warning triangle compliant with ECE-27 directive. Hill start assist (Hill Holder) for easy hill starts. Electronic Stability Program (ESP). Reversing camera monitoring system. Blind spot monitoring system (BSIS) on the right. Intelligent Speed Assistant (ISA). Front area monitoring (MOIS). Emergency brake assist (AEBS). Pre-installation for alcohol interlock (ALC) with cable. NOISE ECE 51/03. Standard EU vehicle width. ECAS air suspension with 2 sensors. Speedline aluminum wheels, SLT. Plastic parts of the cab painted in cab color. Left and right luggage compartments. Transparent sun visor mounted outside on cab roof. Additional diesel/water heater, 4 kW. Fully automatic air conditioning in combination with stationary air conditioning. Standard refrigerator and storage box. Leather steering wheel. With curtains at the bed. Signal horn behind bumper (compressed air). Foldable table in passenger area. One-piece lower bed, firmness: hard. Upper bed with continuous mattress. Ashtray in center console. Electrical pre-installation for tail lift operation, ...

Condition: new, Siemens 6EW1160-5AF power supply built-in power supply unit. A 2025254, used, normal signs of wear, 100% functional, scope of delivery as per photos Ppedpfsi Edwuex Amijr

Condition: ready for operation (used), Wittenstein TPM 025-016R-600K-0H0-045IFSTD tool drive, mounting hole spacing: 52 x 52 x 52 x 52 x 52 x 52 x 52 x 52 mm, drive shaft Ø: 32 mm, mounting flange Ø: 145 mm, used, normal signs of wear, 100% functional Ppedpfex Dwkrjx Amier

Year of construction: 2011, condition: good (used), approx. 816 pcs. stacking yokes for long goods, J. Muszinski, 3 tons load capacity, heights 400 / 500 / 600mm - second-hand- : Ppsdjttncispfx Amier Price per piece ex site, (net) incl. loading! Up to 40 pieces: 109.-€ up to 99 pieces: 105.-€ up to 250 pieces: 99.-€ For complete purchase: 89.-€ Minimum purchase: 16 pieces Manufacturer: J. Muszinski, welding company Type: HF stacking yokes Year of construction: 2011 Load capacity: 3,000kg Own weight: approx. 87 - 99kg Width: 1070 mm Perm. load with internal height: H = 400mm up to 27,700kg H = 500mm up to 22,000kg H = 600mm up to 18,500kg Quantities: 40 cm 227 pcs. 50 cm 441 pcs. 60 cm 148 pcs. Available: immediately Condition: good Location: 47059 Duisburg

Condition: used, mileage: 1,196 km, power: 80 kW (108.77 HP), first registration: 04/2004, fuel type: diesel, overall weight: 3,500 kg, color: green, gearing type: automatic, emission class: euro3, number of seats: 2, Equipment: ABS, all wheel drive, 0782. GW190006255 BAE Systems Pinzgauer 4x4 Power steering Ppsdpfxoqzvd Aj Amijr ABS Automatic transmission ZF 2.5L VW TDI ----Subject to errors and prior sale.

Condition: used, Year of construction: 2017, functionality: fully functional, working width: 200 mm, Linear, automatic bottom, double wall, and 4/6-corner Maximum speed: Up to 200 m/min (stepless adjustment) Paperboard: 350 – 800 g/m2 Corrugated board: E/B flute Box types: Linear, double wall, automatic bottom, and 4/6-corner Folding paths: 1st fold 180°, 3rd fold 135°, 2nd & 4th fold 180° Pjdsxvpt Aopfx Amiopr Electrical voltage: 380V

Condition: good (used), Year of construction: 1991, Approx. 70-80 pieces, HF stacking system, stacking yokes 400 or 450mm high – used -: Price per piece: €105 (net) including loading! Plus €14 (net) shipping per pallet (approx. 8 yokes per pallet) Manufacturer: LBL Viernheim Ppodpfjwdiz Esx Amisr Type: HF stacking system Year of manufacture: 1991 Total outside width: 1m Total outside depth: 50cm Load capacity: 3,000kg Own weight: 65-90kg Type 1: Max. Load capacity at interior height: H = 400mm = 27,700kg approx. 30-40 units H = 450mm approx. 30-40 units Federal Patent: No. 27 38 332 Colors: various Condition: good Available: immediately! Location: 84094 Elsendorf

Condition: good (used), Year of construction: 2022, Approx. 364 pieces, HF stacking system, stacking yokes 400mm high – used -: Price per piece (net) including shipping! For orders of 50 pieces (minimum quantity): only €99. For orders of at least 100 pieces: only €89. For orders of at least 200 pieces: only €85. For complete orders: only €75. Manufacturer: LBL Stacking Yokes Type: HF Stacking System Year of manufacture: 2022 Ppjdpfowhdk Ajx Amijr Color: Red Load capacity: 2,000 kg Weight: 35-55 kg Total dimensions: Depth: 400 mm Width: 920 mm Total height: 730 mm Inner dimensions: Width: 760 mm Height: 400 mm Permissible load: 14,300 kg Condition: Good Available: Immediately! Location: 84094 Elsendorf

Condition: excellent (used), mileage: 252,923 km, first registration: 08/2014, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, power mirror, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Low noise Ppedpfewhpvkex Amijr - Speed limiter - Refrigerator - LED lights - Air suspension - Air horn - Media system - Particulate filter - Sleeper cab - Sun visor - Stability control - Toolbox - Power take-off (PTO) - Central lubrication = Additional Information = General Information: Usable material: Concrete Technical Information: Number of cylinders: 6 Engine displacement: 12,902 cc Unladen weight: 9,637 kg Axle Configuration: Front axle: Steered Rear axle 1: Dual tires Rear axle 2: Dual tires Functional: Superstructure manufacturer: DE BUF ST2 2-AXLE 10M3 CONCRETE MIXER High-pressure pump: Yes Water installation: Yes Water tank: 685 l Hoses: Yes Condition: Technical condition: Very good Optical condition: Very good DAF CF 510 6X4 TRACTOR UNIT WITH 2-AXLE SEMI-TRAILER WITH DE BUF 12 M3 CONCRETE MIXER EURO 6 L PACKAGE 510 HP DRIVE 6X4 AIR-SUSPENDED WHEELBASE 320 CM CF SLEEPER CAB WITH AIR CONDITIONING AND FRIDGE MANUAL TRANSMISSION ENGINE BRAKE 252,923 KM DE BUF 2-AXLE SEMI-TRAILER WITH 12 M3 CONCRETE MIXER 2 AXLES SAF AXLES LAST AXLE STEERABLE DRUM VOLUME 12 M3 2X WATER TANK CAPACITY 625 L CAPACITY 60 L WATER HOSE CENTRAL LUBRICATION SYSTEM FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINES WE HAVE FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: excellent (used), axle configuration: 2 axles, first registration: 07/2014, color: blue, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = - Air suspension - Central lubrication system = Further information = General information Usable material: Concrete Axle configuration Rear axle 1: Steered Weights Unladen weight: 8,620 kg Functional Body brand: DE BUF ST2 High-pressure pump: Yes Water installation: Yes Water tank: 600 l Hoses: Yes Condition Technical condition: very good Visual condition: very good DAF CF 510 6X4 tractor unit with 2-axle semi-trailer and DE BUF 12 m3 concrete mixer EURO 6 L PACKAGE 510 HP DRIVE 6X4 AIR SUSPENSION Psdpfx Amev Um I Ejijpr WHEELBASE 320 CM CF SLEEPING CAB WITH AIR CONDITIONING AND REFRIGERATOR MANUAL TRANSMISSION ENGINE BRAKE 252923 KM DE BUF 2-AXLE TRAILER WITH 12 M3 CONCRETE MIXER 2-AXLE SAFE AXLES LAST AXLE STEERING DRUM VOLUME 12 M3 2X WATER TANKS CAPACITY 625 L CAPACITY 60 L WATER HOSE CENTRAL LUBRICATION SYSTEM FOLLOW OUR INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH WE SPEAK SPANISH

Year of construction: 1995, condition: excellent (used), Connection voltage: 400V Pressure:6.5 Bar Year: 03.1995 Inspection please only after telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Pjdpfegr Ewzex Amiopr Loading possible

Condition: new, Year of construction: 2025, Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). Twin version for faster output due to 2 complete production lines in one machine. The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 90*2=180 cycles/min; bag sizes: L(40-300)xW(60-180)mm, (double film pulling possible for longer bags); suitable film width: 140-380mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 3.9kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.4m³/min; dimensions (LxWxH): 2270*1560*1880mm; weight: 900kg. Ppsdpfjv Nnfzox Amier Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2019, gearing type: other, first registration: 01/2019, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Structure: Saxon brake tester B 99 GF-ECO A modern, fully digitalized brake tester, for trucks, buses, tractors, cars and commercial vehicles up to 15 tonnes permissible axle load, large test width and raised roller position for testing all-wheel drive vehicles, particularly small design for installation in existing foundations and for low depth, automatic test sequence with automatic assignment of axles, braking systems and ovalities, standard with automatic extension aid, soft starter for drive motors and remote control, manufactured exclusively in Germany according to DIN ISO 9001, type approval according to Directive 2011 in Germany, next test date 05/2025, always covered, ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors reserved! Ppodpfx Ajpccbljmijr - .

Year of construction: 1989, condition: good (used), Operating hours: 17 Machine number: 160973 Power: 4.500 W Voltage: 220 V Open circuit voltage: 320 V Amperage: 16 A Podpjbfa Hwefx Amiepr Insulation type: F Cooling type: F

Condition: ready for operation (used), Components to build a very large energy waterwheel. Gearbox: Shaft-mounted gearbox Flender SFO 500 Number of gear stages: 4 Transmission ratio: 185,63 : 1 Transmittable torque: 131.300 Nm Speed n1 max.: 1485 rpm Speed n2: 8 rpm Shaft diameter D1: 80 mm Shaft diameter D2: 220 mm Ppedpfoh Rrtnox Amijr 3500 kg without electric motor Dimensions: Length: 2000mm width: 800 mm height: 1000 mm To the shaft / tube Shaft diameter: 560 mm Tube wall thickness: 35 mm Bearing distance: 10000 mm Shaft can be shortened as desired due to the screwed hubs. Welding is possible without problems on the tube because it has a wall thickness of 35 mm.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, operating hours: 906 h, pressing force: 30 t, stroke length: 400 mm, throat depth: 250 mm, controller manufacturer: Siemens, installation height: 500 mm, Press with only approximately 1000 operating hours! TECHNICAL DETAILS Press data Pressure: 30 t Throat depth: 250 mm Stroke: 400 mm Installation height min.: 100 mm Installation height max.: 500 mm Control: Siemens SIMATIC HMI MACHINE DETAILS Total rated power: 13 kW Dimensions & Weight Machine weight: approx. 3 t Psdpfew Dax Usx Amispr Required space: approx. 2.5 m x 1.70 m x 2.85 m Operating hours Total hours: 2637 h Working hours: 1000 h

Condition: used, mileage: 935,000 km, power: 316 kW (429.64 HP), first registration: 06/2005, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, emission class: euro4, Year of construction: 2005, Equipment: ABS, air conditioning, had accident, Tel.: Call (Contact · Telephone · Mobile · WhatsApp) Special equipment: Tow hitch: Rockinger 500 G 6, work lights (2) on cab roof, mechanical battery isolator switch, cab: with 2 rear wall windows, tinted, pneumatic parking brake on front axle, flame start system, tinted windshield, automatic climate control, heated fuel filter, radio pre-wiring 12V, retarder, tinted side windows, seat cover/upholstery: comfort quality, exterior sun visor, stabilizer on both rear axles, 24V two-pin cab socket, tinted door windows, front underrun protection Further equipment: Ppodeul Nxwepfx Amijr Axle configuration: 6x4, front axle load 8.0 t, trailer socket 24V / 7-pin, trailer socket ABS, anti-slip regulation (ASR), exterior mirrors electrically adjustable and heated, wide-angle exterior mirrors and electrically adjustable and heated, right, 175 Ah battery, battery box, MAN-Tronic on-board computer, curb mirror right, rear axle differential lock, twin halogen headlights, EDC engine control, electronic braking system MAN-Brakematic, EURO 4 engine, cab size: L, cab with air suspension, comfort driver's seat, tachograph, suspension: leaf/leaf, electric window lifters, 100 A alternator, speed limiter 80 / 85 km/h, 12-speed transmission - type: ZF 12 AS, Tipmatic, rear axle HY-1370, interior filter: pollen filter, body/chassis: chassis, EVB rocker-brake, fuel tank: 400 ltr., adjustable steering column (steering wheel), 1-cylinder air compressor, engine 10.5 ltr. - 316 kW diesel, rear axle disc brakes, front axle disc brakes, side protection device, front axle stabilizer, plastic bumper, cross member for tow coupling, rear underrun protection, front axle VOK-08 dropped, electronic immobilizer, central locking, permissible total weight 26.00 t * MAN Tga 26.430 6x4 * Silo body * Manual transmission * With sleeper cab * Full leaf suspension * Euro 4 * VIN: WMAH26ZZ35M415365 * Gear shift unit defective * Old tachograph * Year of manufacture: 2005

Condition: used, mileage: 726,158 km, first registration: 04/1998, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro2, Tel.: call (Contact · Telephone · Mobile · WhatsApp) * MAN Steyr F200 32.403 Silent 8x4 * Silo body * Full leaf suspension * Manual transmission * VIN: WMAT450339M243778 * Engine type: D2866 LF 20 * kW: 294 * Euro 2 * Displacement: 11,967 ccm * Gross weight: 32,000 kg Ppsdpfx Ajtriuljmior * Axle load: 7,100 / 7,100 / 9,500 / 9,500 kg * Payload: * Wheelbase: 1,500 mm * Net price * All information without guarantee

Condition: like new (used), Year of construction: 2023, operating hours: 40 h, functionality: fully functional, machine/vehicle number: S/N:01130421-2.24, type of input current: three-phase, total height: 1,150 mm, total width: 1,200 mm, total length: 1,030 mm, input voltage: 400 V, overall weight: 610 kg, feed length X-axis: 340 mm, feed length Y-axis: 320 mm, feed length Z-axis: 420 mm, type of cooling: water, input current: 16 A, protection type (IP code): IP20, laser power: 600 W, input frequency: 100 Hz, laser wavelength: 1,070 nm, Equipment: documentation/manual, type plate available, Offered is a virtually new laser welding machine from Alpha Laser including accessories (water cooler, welding fume extraction, lifting table, and much more). Average. Power 600 W - peak pulse power CW: 9kW The ALFlak systems consist of (basic equipment): - Laser with processing head and Leica observation optics Ppodevu Tdgepfx Amisr - UV glare protection - Multifunctional foot switch - Lighting - WIN Laser software "BKS" - Joystick Laser: pulse and CW mode, pilot laser Motorized movement system Machine axes: 3 or 4 Travel range (X, Y, Z) approx. 320 x 330 x 370 mm Arm deflection/working distance: approx. 1400 mm Incl. standard beam deflection unit (600-0365A) Incl. 12.1" touchscreen new version (300-1171C) With door acknowledgement on the display holder Incl. magnetic beam protection plate (701-0687A) If you are interested, I will be happy to provide you with a detailed offer.

Condition: used, Year of construction: 2009, machine/vehicle number: 0701-250008, Rösler roller conveyor for the longitudinal transportation of profiles and sheet metal. This stable roller conveyor system is suitable for transporting materials in the steel trade or steel construction. The roller conveyor is 9.60 m long. The roller conveyor is powered and was used as a connecting roller conveyor between a Rösler blasting system and a Kaltenbach drilling saw system for transporting steel profiles and steel sheets. The height of the Rösler roller conveyor is 640 mm and the roller width is 2700 mm. The diameter of the transport rollers is 140 mm. Ppjdpfeyild Asx Amisr Cross tractors are also available as a lifting carriage system on request at an extra charge.

Year of construction: 2024, condition: new, XX100329 CNC Machining Centre with 3 axes and worktable with pneumatic positioning at 0°/90°/180° FOM INDUSTRIE FMC 120 Machine in stock and ready for shipping Podpfxehlkqpo Amijpr Standard configuration: - Servo-ventilated three-phase spindle motor 3 kW, regulation of spindle rpm by numerical control - inverter (1000/17000 rpm) - 6 position tool-holder for manual change with pneumatic locking (ISO 30) - Pneumatic rotation of the work table 0° to 90° to 180° - Mobile control console with PC, 24'' - No.4 pneumatic vices with manual positioning and double pressure with safety valves - Manuallly adjustable profile reference stops on right and left of work table - Minimum quantity lubrication (MQL) with pure oil - Perimeter safety casing on 3 sides and retractable front door - FST CAM 4 program Optional equipment installed on the machine: - PR204851 5-position automatic tool magazine (ISO 30) - PR207680 4-vice Easy-to-Set configuration: • Transformation of standard vices into vices with automatic movement and pneumatic locking • 2 retractable pneumatic side stops • SW for vice positioning - PR-28965 Beam rotation stop for intermediate angles with manual adjustment - PR204833 External stop with tunnel - PR202971 Data import software for data in accordance to FOM protocol with wireless bar-code reader - PR-27602 Tool set for aluminium - QN-28849 ISO 30 cone with milling cutter Ø 75 mm thickness 6 mm for end milling

Year of construction: 2025, condition: new, XX100292 New CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock and ready for shipping Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software Ppodpfx Ameiv Imnsijr • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 38900 € 742.99 € 64 mm 4000 mm 950 mm 1250 mm 850 kg 10 cm³ 64 x 3,3 mm 2" mm 60,3 x 2,2 mm 60 x 60 x 2 mm 40 x 60 x 4 mm 60 x 40 x 3 mm 76 mm 200 mm 20 mm 210 ° 4.2 kW 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Ppjdpfoynmtfsx Amier Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending speed up to 4 rpm (Inverter versions) Pneumatic chuck ALTERNATIVELY: model with mandrel length 1,5 / 4 / 6 mm