Used Mbo, Multinak, Band All, ... Folding Machine, Saddle Stitcher, ... for sale (82,506)

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Iiodpfx Anezk Nmrsgeg Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: good (used), Mobile delivery for folding machine Heidelberg SAK-66 Fully operational, ready for production. Manufactured in Heidelberg, Germany. Iodpjzvgkrsfx Angsig Brand new belts. Can be connected to any Heidelberg folding machine, with smooth delivery speed adjustment. Height and angle adjustment.

Condition: as good as new (ex-display), Year of construction: 2023, sheet width 1050 mm plate thickness 1.50 mm daylight opening 100 mm bending angle max. 135 ° height OW 100 mm total power requirement manuell weight of the machine ca. 330 kg. dimensions of the machine ca. 1600 x 900 x 1450 mm Exhibition machine from 2023 only 2x machines in stock special price on request Features: - robust, manual folding machine - split upper, lower and rear tool Iodsxaa T Uopfx Angjig * Height of upper tool = 100 mm * Pitch 100/100/100/100/100/100/100/100/100/70/60/50/40/30/100 * Left right with horn tool - Upper tool with quick-change system - Quick foot clamping - Angle fence - lockable - Manual back gauge 500 mm - Machine can be moved (rollers) - Accessory box - rear * Pictures show identical machine (UFA 1212)

Condition: used, Year of construction: 1989, Second-hand machine Small machine for moulded part machining The machine processes hot-melt adhesive-coated edging material, which is reactivated using hot air The workpiece is automatically fed by pressing it against the central, driven pressure roller, which ensures uniform adhesive reactivation and thus reliable bonding Thermostatic temperature control via a dial thermostat Maintenance-free three-phase hot-air blower for continuous operation Automatic airflow deflection Pneumatically operated roller cutting device cuts even the toughest veneer and PVC edging Foot switch for moulded part processing Workpiece thickness 10–50 mm Heating capacity 3 kW Connected load 3.3 kW Workpiece width min. approx. 25 mm Iedpozk N Ehjfx Angoig Edge thickness approx. 0.5–1 mm Minimum internal radius approx. 25 mm Feed rate 4 m/min. Pneumatic pressure 6 bar Weight approx. 105 kg Availability: at short notice Storage location: Röllbach

Condition: ready for operation (used), Size max 480 x 320 mm Size untrimmed with lap max 480 x 320 mm Iisdpfxsd Ir Izo Angjg Size untrimmed without lap max 440 x 290 mm Size trimmed with lap max 470 x 300 mm Size trimmed without lap max 430 x 295 mm min 148 x 75 mm Speed max 10.000 c/h Equipment stitching unit • stitching unit 321 • thickness control/ plus-minus • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 890 knives • 2 sets of knives

Condition: used, Year of construction: 1990, Second-hand machine Year of manufacture: 1990 Iisdpfxezk N Ame Angog Features and technical specifications: - Automatic edge feeding - Cartridge gluing system - 4-roller pressure unit - Cross-cut saw unit - Flush milling unit - Combined milling unit for flush, chamfer and radius - Radius scraper blade - Sanding unit - Edge banding thickness 0.3–20 mm - Edge banding height: max. 66 mm - Edge banding length: min. 200 mm - Feed rate 8/16 or 12/24 m/min Availability: at short notice Storage location: 63934 Röllbach

Condition: new, Year of construction: 2025, Horizontal cartoning machine for inserting products into folding boxboard. Suitable for a variety of products (solid products) such as tubes, bottles, plastic boxes/jars, vials, blister packs, cosmetic jars, vacuum packed food. The fully automatic packaging process includes feeding of the products, erecting of the folding boxes, insertion of the products, closing of the box and out feeding of the box. Changing to different box sizes within the range is possible with moderate adjustments to mechanical components. PLC-controlled, touch screen operating monitor (menu available in different languages e.g. English, German etc.). - Specifications: Dimensions of the folding box: L(50-200)xW(20-85)xH(20-75)mm; requirement carton/paper thickness of the box (min-max): 250-450g/m²; max. cycle of the machine in neutral: 100 cycles/min; power supply: 380V, 3phase; power consumption: 1.5 kW; compressed air and compressed air consumption: 0.6-0.8MPa, 20m³/h; dimensions of the machine LxWxH: 3870x1100x1800mm; weight: 1200kg. Iedpfx Anjv Nkwasgeig Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: good (used), Busch TB24 I Banding Machine The machine is in very good condition. The device operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Cycles per minute: 20-25 cycles/min Band dimensions: Length: unlimited Width: Paper – 24 cm Foil – 18 cm Height: 15 cm. The machine comes with: spare bands, an instruction manual, and a machine cover. Iedpfxszlgd Rs Angsig

Condition: good (used), Akebono OB-360 Banding Machine This machine is in very good condition and has been serviced. One of the most recognized machines in the world. The latest model. The machine operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it to create an elegant package. Ideal for wrapping business cards, flyers, calendars, and other materials. Can be used with paper or foil tape. Technical specifications: Tape width: 29 mm Cycle speed: 28 cycles/min Frame dimensions: 420 x 210 mm Length: unlimited Weight: 40 kg. Isdpfx Aszyz Dnengoig Made in Japan.

Condition: used, Year of construction: 1965, Technical details: plate width: 2040 mm plate thickness: 2 mm distance between columns: 2300 mm stroke adjustment: 2050 mm bending angle max.: 0-135° ° Knife length: 85 mm weight of the machine ca.: 1,7 t space requirements approx. LxWxH: 3,2 x 1,7 x 1,3 m Manual bending machine Maximum adjustment of the bending beam: 80 mm Iiodpfxszp U Hbj Angjg *

Condition: good (used), Year of construction: 2000, RAS 73.30 Flexibend CNC bending machine / swiveling bending machine. The machine is equipped with segmented tooling and a quick-clamping system. Manufacturer: RAS Model: 73.30 Flexibend Year of manufacture: 2000 Working bending length: 3200 mm Max. sheet thickness: 3.0 mm Opening height of the top beam: 300 mm Motor power: 4.5 kW Dimensions (L × W × H): 4300 × 2300 × 1750 mm Weight: approx. 4.4 tons Control: FlexiBend 5000 Iodpfxozz A Nus Angsig CNC-controlled rear stop: 10–1550 mm Automatic adjustment of the lower blade on the bending beam Two control pedals Segmented upper blades, height 155 mm Do you have any questions? Please feel free to contact us.

Condition: used, Year of construction: 2011, Second-hand machine Year of manufacture: 2011 Condition: Machine fully overhauled and serviced Features and technical specifications: Feed speed: infinitely variable 10–18 m/min Edge Control 19 control system with 18.5-inch colour touchscreen Joint milling unit Edge feed Adhesive application station: Cartridge, feeler nozzle with automatic glue level adjustment Printing unit Trimming unit Multifunctional milling unit Copy milling unit Radius scraper unit Flat draw blade Iijdpfx Anjzk N Eujgog Polishing Workpiece thickness 6–60 mm Edge thickness 0.4–8 mm Min. workpiece width 60 mm Shortest workpiece length 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: at short notice

Condition: ready for operation (used), Hole Punch Ijdpfxjir A Hae Angjig Centre cut Slim line stitching heads

Condition: good (used), Year of construction: 2008, functionality: fully functional, Horizon AFC-566FKT year 2008 flat pile feeder 6 buckles operation via touch screen Ijdpfx Ansz Dg E Asgsig cross cutter side buckle without delivery located in Germany currently in production available immediately

Condition: good (used), Year of construction: 1998, 0.4-5 mm Workingpiece thickness from to 10-50 mm Total length 2730 mm Weight 720 kg Iiedpfx Ajx Tu Rdjngjg

Condition: used, Year of construction: 1998, sheet width 2000 mm plate thickness max. 4000 mm make 2974 rear stop ja Isdpfx Aeztf Abjngoig foot pedal ja degree steuerbar weight of the machine ca. 3,93 t

Condition: used, Year of construction: 2002, total height: 2,400 mm, total length: 2,000 mm, total width: 950 mm, Colour: Blue Weight: 1.500 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AY11051 - Saw direction: vertical - Main motor power [kW]: 15.0 - Wheel diameter [mm]: 915 - Max. cutting to feed roller opening [mm]: 230 - Max. cutting to stop opening [mm]: 260 - Max. cutting width to column [mm]: 300 - Max. total opening [mm]: 480 - Max. cutting height [mm]: 330 - Table width [mm]: 1010 - Table length [mm]: 740 - Max. band saw width [mm]: 100 - Min. band saw length [mm]: 5385 - Max. band saw length [mm]: 5485 - Min. band saw thickness [mm]: 0.8 - Max. band saw thickness [mm]: 1 - Feed roller type: Manual - Extraction port diameter [mm]: 150 - Voltage [V]: 400 Iiodpfx Anjzudb Eegeg - Current consumption [A]: 28 - Fuse [A]: 32 - Power [kW]: 15.0 - Transport dimensions: 2000mm x 950mm x 2400mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Iodpev Sv Enofx Angoig Availability: short term Location: Röllbach

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,812 h, functionality: fully functional, machine/vehicle number: FJ.DKA0-000212, product width (max.): 480 mm, product height (max.): 12 mm, product length (max.): 320 mm, TECHNICAL DETAILS Performance (cycles/hour) Speed: max. 14,000/h Wrapping speed: max. 14,000/h Pre-folding: max. 12,000/h Piston opening: max. 12,000/h Offset stitching: max. 12,000/h Dimensions – Width × Spine Length Uncut: max. 320 × 480 mm Uncut: min. 85 × 128 mm Single-up Cut: max. 315 × 475 mm Minimum cut size: 80 × 120 mm Double-up Uncut: min. 85 × 210 mm Trim mark Cut: min. 2 × 64 × 100 mm Ijdpfx Aszw Ak Rengjig Product height (compressed) 3-knife cut: max. 12 mm Middle cut as trimming cut: 10 mm Middle cut as punching cut (half punching width): max. 6 mm Triple cut as trimming cut: 5 mm MACHINE DETAILS Operating hours (according to counter): 14,812 h EQUIPMENT 1 CHU feeder 2 DVU vertical feeders 2 DHU horizontal feeders 1 Stitchmaster three-knife cutting machine with middle cut 2 knife sets 4 stitching heads CHA forklift Note: Further technical details can be found in the attached document.

Condition: good (used), Com J240/30 Banding Machine on a Base One of the most recognizable banding machine manufacturers on the market, manufactured in Japan. The machine operates in manual or automatic mode. Iiodpfxezyz Duj Angsg Production version, for heavy loads. The machine is mounted on a standalone structure with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for packaging business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Performance: 26 cycles/min Dimensions of the banded product: 240 x 150 mm Made in Japan. Weight: 70 kg.

Condition: good (used), Year of construction: 2001, sheet width 2020 mm plate thickness 1.5 mm ST bending angle max. 180 ° Swing beam adjustment ca. 20.0 mm Bending time for 90° 5.5 sek Control konv. voltage 380 V total power requirement 1.5 kW weight 1180 kg range L-W-H 2650 x 1230 x 1100 mm Ijdpfxszr Rqhe Angjig Features: - Simple electric motor-driven swivel bending machine - Manual depth/material stop * Stepless adjustment up to a maximum of 700 mm * Adjustment via handwheel from the rear * Analog position display - Simple manual angle adjustment - 1x bending tool set * With bending rail .. 10 mm - Manual lower crossbar adjustment .. approx. 20.0 mm - Emergency stop button on the front - 1x freely movable double foot switch - Operating instructions (DK)

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft businesses. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: grooving cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; grooving cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (incl. pneumatic lifting mechanism), finishing station, robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Iisdpfx Aei Anadjngog Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Undercarriage F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for milling cutter and radius pull blade F6/28 Spray for texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock at warehouse 54634 Bitburg Immediately available - in stock.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 3,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting range at 90° (round): 530 mm Cutting range at 90° (flat): 530 × 800 mm Cutting range at 45° (flat): 530 × 520 mm Cutting range at 30° (flat): 530 × 320 mm Cutting angle: 45° - 0° - 60° Blade speed: 20–120 m/min Feed length: 1,500 mm MACHINE DETAILS Saw motor power: 3.0 kW Coolant pump: 100 W Hydraulic pump: 370 W Power connection: 400 V / 50–60 Hz Dimensions & Weight Dimensions (L × W × H): 2,500 × 4,000 × 2,500 mm Total weight: 3,500 kg EQUIPMENT Machine stand with chip collection tray Iisdpozyccxofx Angjg Hydraulic cutting pressure control Stepless blade speed control Hydraulic guide arm adjustment Minimum quantity lubrication Automatic shutdown at the end of the cut Chip brush Hydraulic miter adjustment Hydraulic clamping device Hydraulic blade tensioning Operating manual

Condition: excellent (used), Year of construction: 2020, Ref: 11145 . 2020 Horizon AFC-566 FKT Automated B2 size folding machine with up to 14 different folding patterns. Equipped with: Flat pile feeder Pro-Face touch screen control Computer assisted make-ready, including roller gap adjustment Sound Hood Iijdpfx Ansz Akl Hsgjg Digital Counter LCV-54 shingle delivery. Folding configuration: 6 Buckle plates in first station Electronic knife fold 2 x side buckle plates under knife Specification: Sheet size, Max: 558 x 850 mm Min: 128 x 148 mm Pile height, Max: 740 mm Prod. speed, Max: 42,000 sheets/hr. (A4 parallel fold).

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, Iisdpfx Anszuyqiegeg rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented