Used Pneumatic Clamp for sale (14,184)

Year of construction: 2002, condition: good (used), Make: HAEUSLER Type: Crocodile Year: 2002 Specifications Metric US Standard Min. shell inner diameter 1500 Max. shell inner diameter 6000 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Pgodpfokwcnzsx Amijk Minimum wall thickness 20 mm Maximium wall thickness 70 mm Max. section weight 30 T Max. weight total workpiece 120 T Dimensions (Estimate) Length 60000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2007, condition: good (used), Make: HAEUSLER Type: Clamp Year: 2007 Specifications Metric US Standard Pgsdpfskwcn Eex Amisk Min. shell inner diameter 1800 Max. shell inner diameter 5500 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 10 mm Maximium wall thickness 40 mm Max. section weight 15 T Max. weight total workpiece 60 T Dimensions (Estimate) Length 24000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, table height: 3,500 mm, total height: 3,500 mm, overall weight: 4,800 kg, total width: 1,200 mm, - Cast iron clamping angle: for workpiece clamping - Clamping surface: 3500 x 1200 mm - Weight: 4800 kg Pgedoy Evl Tspfx Amijk

Condition: used, overall weight: 398 kg, total length: 500 mm, total width: 500 mm, total height: 820 mm, Clamping cube with Roemheld hydr. Screw in module Mounting holes 4 Pitch fixing holes 320 mm Pitch Roemheld module 170 mm Top to first module 120 mm Length 500 mm Psdpfx Ameywzamoijgk Width 500 mm Height 820 mm Weight 398 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, overall weight: 126 kg, total length: 400 mm, total width: 400 mm, total height: 445 mm, Clamping Cube Mounting holes 8 Pitch fixing holes 160 mm Pgsdpjywy Ucofx Amijk Length 400 mm Width 400 mm Height 445 mm Weight 126 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Assembly table, T-slot work table, welding table, T-slot table, T-slot plate Overall dimensions: 3500 x 2500 x 600 mm Psdsy Emp Nepfx Amiogk Weight: 8.9 t T-slot width: 36 mm Number of T-slots: 12 pcs

Condition: used, Technical details: weight: 400 kg 8 clamping jaws each ca. 600 x 210 x 170 mm , hole dia. 22 mm, center distance ca. 170 mm was used for clamping rings on a Vertical Turning Machine * Pedeyim D Rjpfx Amiegk

Condition: excellent (used), For sale: Professional modular T-slot plate designed for securing workpieces during machining. Ideal for use with milling machines, grinders, and other workshop machinery. The modular system with blocks allows highly flexible and rapid setup of clamps. Various components can be mounted and adjusted to suit the workpiece. Dimensions: 77 x 40 cm. Condition: used, in good technical condition. Shows normal signs of use. Fully functional. The robust steel construction ensures stability and precision during operation. Pjdpfeyyqktex Amiogk

Condition: used, functionality: fully functional, Clamping block for SK 40 tools The metal plate is labeled Lorenz Ettlingen 7-191-020-0001 For securely clamping tool holders with SK40 during tool changes – tool clamping Pgsdpoyuwzmefx Amiek E.g., as an accessory for Lorenz gear hobbing machines – slotting machines. Clamping vice / mounting table / clamping cube. Clamping device for secure fixation and clamping. Clamping tower – tool change device Suitable for 4 pcs. SK 40 tool holders Price / details on request All technical data subject to errors and misprints. We sell exclusively to countries within the European Union.

Condition: excellent (used), Clamping table / drilling cube Table surface horizontal: 600 x 600 mm Table surface vertical: 600 x 420 mm Tiltable from 0 to 90 degrees T-slot width: 18 mm Pgjdjywinfepfx Amijk Height: 760 mm Width: 1000 mm Depth: 600 mm Weight: 445 kg

Condition: like new (used), functionality: fully functional, mileage: 552,666 km, first registration: 01/2023, fuel type: diesel, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, suspension: air, Equipment: ABS, Bluetooth, airbag, navigation system, onboard computer, SCANIA 590 S - Registration: 01/2023 - Mileage: 552,666 km - Full air suspension - Retarder Pgsdoy Ey E Dopfx Amijk - Stationary air conditioning - Navigation system - LED headlights POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING SOLUTIONS ON SITE. AVAILABLE FROM 24 UP TO A MAXIMUM OF 96 MONTHLY INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES BRANCH DOMENICO ESPOSITO S.P.A., EBOLI (SA) BRANCH – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30 AM–7:00 PM | SATURDAY 8:30 AM–2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500 – S 500 – S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S – Semi-trailer – Refrigerated Tipper Semi-trailer – Lamberet – Schmitz – Isuzu – Fixed Body – Crane – Tipper – 4 Axles – Rear 4 Axles – Tway – T-Way – 540 – 460 hp – Xway – X-Way – Three-way Tipper – V8 – Scania – Frost Edition Curtain Side – Box Body – Tail Lift – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl declines any responsibility regarding discrepancies in technical specifications, options, and features, which in some cases may differ from those indicated in this description. We kindly invite you to verify the characteristics of the specific vehicle.

Condition: good (used), Clamping towers for horizontal milling center. Different types. Pedpjxfugtsfx Amiegk

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Pgjdpfx Asyqr Sxomiek

Condition: like new (used), number 2 Stück taper ISO SK 40 Milling holder/chuck for Lorenz LS 156 Pedeuiz Hyjpfx Amiegk

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 4,800 kg, empty load weight: 945 kg, construction width: 1,350 mm, opening width: 1,700 mm, Clamp fork Load center: 600 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for operation and fully functional Technical condition: good Description: If you have any further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Feel free to browse further on our website fleischmann-foerdertechnik. We are also happy to arrange leasing & financing as well as delivery under favorable conditions. We also accept Linde equipment as trade-ins – even if you do not purchase a machine from us. The operating hours shown were read at the time of listing. Subject to prior sale, modifications and errors. Pgodpfx Amsy Ap T Eeiok Fork length: 2350 mm

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 4,800 kg, empty load weight: 945 kg, construction width: 1,350 mm, opening width: 1,700 mm, Clamp fork Pedpfxey Ap Txo Amijgk Load center: 600 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: If you have any further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Feel free to browse our website at fleischmann-foerdertechnik. We are happy to offer you leasing & financing options as well as delivery at favorable rates. We also accept Linde devices in part exchange – even if you do not purchase a device from us. The operating hours stated were read at the time of listing. Subject to prior sale, changes, and errors. Fork length: 1300 or 1900 mm

Condition: like new (used), 3 unused clamping elements Dimensions, W x D approx.: 100 x 150 mm Total height: 91.5 mm Jaw width: 30 mm Lowest support height on jaws: 68.5 mm Medium support height: 80 mm Pgjdpfx Amoy A Nkksijk Clamping height per jaw approx.: 11.5 mm

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting Pgodpfxofv Av Se Amiek • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm Psdpsfv Awaofx Amisgk spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: used, Crimping pliers for crimping tubular cable lugs and connectors with exchangeable blades for the processing range 10 - 120 mm². available blade inserts: 10, 35 and 70 mm² Pgsdecabzrjpfx Amijk Total length: 660 mm Weight: 4,1 kg

Condition: excellent (used), Clamping surface: 400 x 400 mm Pgodpjxlha Tefx Amijk Support surface: 300 x 400 mm Clamping surface with 4 horizontal and 4 vertical T-slots each, for T-slot nuts: M12 for slot width: 14 mm Slot pitch: 100 mm Weight: 102 kg

Year of construction: 2015, condition: used, Manufacture : Volkmann Model : VS250 Eco Year : 2015 Classification: ATEX Ex (see photo) Pedpfjyvk Tgjx Amisgk Type: MULTIJECTOR® Vacuum Transfer System / conveyor VS250 G900 Pump and Cover Assembly Maximum air intake flow rate: 4,063 NI/min Electrotimer ET3S (Electropneumatic control unit) Cleaning filters with compressed air Materials: stainless steel

Year of construction: 2024, condition: used, Manufacture : Volkmann Model : VS250 Eco Year : 2024 Condition: new, never used Classification: ATEX Ex (see photo) Type: MULTIJECTOR® Vacuum Transfer System / conveyor VS250 G900 Pump and Cover Assembly Maximum air intake flow rate: 4,063 NI/min Pgjdpfxeyvk Tas Amisk Electrotimer ET4S (Electropneumatic control unit) Cleaning filters with compressed air Materials: stainless steel

Condition: used, table clamping surface: 228 x 273 mm 3 T-slots: 12 mm in between 4 x 4 threaded holes: M 8 table height at zero position: 146 mm Podpebbgcxofx Amijgk Space requirement: 250 x 290 mm Weight: 41 kg

Condition: like new (used), 1 set of clamping elements, size M20, in a mobile auxiliary cabinet, W x D x H approx. 0.6 x 0.6 x 1 m, featuring: - 3 very sturdy drawers - manual locking/unlocking of each individual drawer Psdpfxoy Awp Is Amiogk