Used Bending Bench for sale (5,411)

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes Njdoh U Rzgopfx Akqscr NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Year of construction: 2004, condition: like new (used), Profile bending machine hydraulic heavy duty -output shafts 360 mm Equipped with traction tooling for H-beam HEB IPE INP rolling on the hard-side Configuration Ncjdpsiwa Hcsfx Akqer -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic and gear unit -synchro. -set of rolls for HEB beam – INP beam - flat bar square bar. -Set of heads for traction the HEB – INP beam bending on the hard side -Set of rolls for pipe bending. Pipe 20 inches max capacity. -Lateral correctors left/right side hydraulic operated in 3 directions -Add-on rollers angle bending & T-section leg-in / leg-out -Control panel console electric joysticks manual use & program automatic -Digital readout screen display 8 axis position reading of the rolls - 8 axis automatic programmable bending works -Electric Vac 400/50 ( rewirable on request ) -weight total of the machine approx. 65 Ton. -Hydraulic reservoir oil 1200 liters -High pressure hydraulic power unit multi pumps run on 100Hp electric motor . -Working speed variable slow-fast. -Emergency shut-down devices in compliance with safety requirement. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation books along with the machine On request we supply additional set of rolls interchangeable to seat and bend the wanted profiles. Capacity table max.: – HEB 500 -INP 600 *-ANGLE 200 MM *-T300 MM *-20″ PIPE SIZE *-UNP 500 MM *-FLATBAR 300X80 MM *-SQUAREBAR 200 MM *-PIPE/TUBE UP TO 508MM see capacity chart in enclosed

Condition: ready for operation (used), Year of construction: 1999, pressure 36.0 t stroke 250 mm flat steel 200 x 10 mm working feed 6.0 - 24.0 mm/min return speed 60.0 mm/min work height max. 900 mm table: 580 x 1170 mm total power requirement 4.1 kW motor 400 Volt 50 Hz oil volume 60.0 ltr. weight 1100 kg range L-W-H 680 x 1170 x 1130 mm Current list price approx. € 28.000 Special price on request Ncedpfxjyy A Idj Akqor Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting - Several/various bending tools - Infinitely variable adjustment of bending speed and pressing force - 1x freely movable double foot switch - Operating instructions

Condition: good (used), Drilling capacity 13 mm Spindle mount B 16 6 spindle speeds 410 - 3400 rpm Drilling depth 60 mm - Drill head height adjustable - Motor pole reversible Ncsdpswnfarefx Akqsr Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: good (used), Grinding wheel diameter: max. 300 mm Rotational speed: 1,500 rpm Drive power: 1.5 kW Machine dimensions (L x W x H): 750 x 420 x 1100 mm Weight: approx. 130 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Ncedpew Emahefx Akqsr

Condition: good (used), Year of construction: 1993, machine/vehicle number: 93212004, Offer 26084 Technical Data: - Maximum working width: 2040 mm - Maximum material thickness at 40 kg/mm² tensile strength: 4 mm - Bend angle adjustment: electronically pre-selectable, 0 - 135° - Automatic sequence control for a complete work cycle - Maximum upper beam opening/clamping stroke: 350 mm - Height adjustment: - Bending beam: 100 mm - Lower beam: 100 mm Nedsy Em Dgspfx Akqscr - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW - Bending beam adjustment - Back gauge adjustable via handwheel - Electric foot switch - Space requirement with back gauge: approx. W 3200 x H 1650 x D 2100 mm - Weight approx.: 4500 kg

Condition: good (used), Stock number: 3030 Manufacturer: Wörner Machine number: 26207 Type / Model: B8 Nodpfxexfa Upe Akqscr Drilling capacity: up to 10 mm Spindle mounting: Drill chuck Speed range: 780 to 10,000 rpm Stroke: 70 mm Throat depth: mm Table clamping surface: 240 x 220 mm Head adjustment: Machine footprint: 320 x 430 mm mm Total connection: kW Accessories/Equipment: Drill chuck Condition: very good Weight: 120 kg Dimensions with table: 600 x 800 x 1,200 mm Table working area: 560 x 720 mm

Condition: used, Year of construction: 2017, Transnorm curved belt Conveyor 45° links 670-500 IR1100 RA1083 The Transnorm curved belt is from 2017. It is as good as new (used) and fully functional. It has an engine of the brand SEW. Columns are not included in the scope of delivery. These are optionally available. curved belts are often used in intralogistics for in-house transport of piece goods and are indispensable for modern distribution centers. Transnorm curved belts convince with performance and reliability. Long operating times are no problem thanks to a low-voltage drive over the entire belt width. Conical drums and a specially developed belt guidance system ensure maximum smooth running. Technical data: Manufacturer: Transnorm Type: TS 1600-105 FH2 curved belt 45° links Built: 2017 Condition: as good as new (used) Engine: fully functional Angle: 45° Running direction: left Inner radius (IR): 1100 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 500 mm Side guide: steel sheet outside Drive: SEW gear edgear motor Drive position: external pulling Weight: 120 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik Ncodjk Aa Dtepfx Akqor

Condition: used, Year of construction: 2015, Transnorm curved belt conveyor left bend 90°-800-700 IR900 RA2116 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm Ncjdpfx Aksq Uap Roqsr motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,67 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor right 30°-1270-1100-IR900 RA2302 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,4 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Nedpot D R R Eefx Akqjcr Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2008, Transnorm curved belt conveyor right bend 90°-800-700 IR900 RA2080 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm Ncedpfx Aksn Tpvgoqor belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 1x 0,67 m/s, 2x 0,25 m/s, 1x 0,33 m/s or 1x 0,83 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2012, Transnorm belt curve conveyor right 90°-885-700-IR400 RA1830 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Conveying length middle radius (NL): 1178 mm Frame width (NB): 885 mm belt width (GuB): 700 mm height (BH): 170 mm height including motor (MH): 370 mm Inner radius (IR): 400 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,217m/s Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.25 / S1 Belt:(wear see pictures) Year of construction: 2012 Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Njdpfxoqy Sgco Akqscr We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2022, Transnorm curved belt conveyor left 45°-950-800-IR900 RA2306 Technical data: Frame width (NB): 900 mm Frame width with Bearing cover: 950mm Frame width with Bearing cover and Motor: 1250 mm belt width (GuB): 800 mm height (BH): 250 mm Inner radius (IR): 900 mm Conveying angle: 45° degrees conveying speed (v m/s): 0,42-1,50 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 0,75 / S1 Ncsdpfougb Rgsx Akqor Year of construction: 2022 Height Sideguides: 200 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, curved belt 60° right Transnorm TS1500-80 Built in 2007 Direction: right Width: 500 mm Inner radius: 600 mm with guiding systems inside and out Ncjdpsk Aa Exsfx Akqer Drive location: outside pulling constant speed v = 0.75 m/sec. incl. 3 supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2008, curved belt conveyor curved belt 45° right Transnorm TS1500-80 second-hand machine Technical details: Manufacturer: Transnorm Type: curved belt 45° right TS 1500-80 belt bend conveyors Year of construction: 2008 Angle: 45° Direction: Right Nominal radius/radius of indoor RN: 2480 mm BN width: 700 mm Drive location: outside pulling installed power: 0.37 kW Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: L x W x H = 1800 x 1100 x 600 Weight (gross): 120 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Ncedsk Aa Hyspfx Akqor Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1999, Transnorm curved belt conveyor right bend 125°-775-600 IR600 RA2012 Nedpfx Ajk Abt Eskqocr Technical details: Manufacturer: Transnorm Type: Belt Curve 125° right TS 1500-100 Curved belt conveyor Year of manufacture: 2001 Angle: 125° Running direction: right inner radius (IR): 600 mm belt width (GB): 600 mm Speed: please contact, motor not yet mounted Belt type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Scope of delivery: without supports & sideguide (please inquire if required) Optional: supports & sidequides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2014, Transnorm curved belt conveyor left bend 90°-800-700 IR900 RA2117 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Njdpfx Ajpfkd Hjkqocr Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,67 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2014, Transnorm curved belt conveyor right bend 45°-800-700 IR900 RA2140 Technical data: Ncodpfx Akeq Twlpoqjr Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2015, Transnorm curved belt conveyor right bend 90°-800-700 IR900 RA2118 Technical data: Ncjdpfx Akjrhkwdsqsr Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,29 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2012, Transnorm curved belt conveyor right 40°-780-600 RA1848 Make: Transnorm Running direction: 40° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm V230/400 kw 0,37 Height frame: 280 Scope of delivery:with motor, without supports (please enquire if required) Optionally available: Supports Side guide one and both sides frequency inverter For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. Njdpfxek Abg Ss Akqjcr We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2020, Transnorm belt curve conveyor right GKF 90°-700-500-IR450 - NEW RA2312 Technical data: Frame width (NB): 700 mm Frame width with Bearing cover and motor: 900 mm Njdpfxouuu Rqs Akqocr belt width (GuB): 500 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 450 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,67m/s Drive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2020 Optionally available: Supports Sideguides Sideguides Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1998, Transnorm curved belt conveyor right 90°-800-600-IR600 RA2162 Make: Transnorm Running direction: 90° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: contat us Optionally available: Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Just contact us by phone or mail or visit our website We will be happy to help you plan and implement your projects. Njdpfsq Uap Hjx Akqjcr We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1998, Transnorm curved belt conveyor left 90°-800-600-IR600 RA2169 Make: Transnorm Running direction: 90° left running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: contat us Ncsdpfxeq Awyte Akqer Optionally available: Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Just contact us by phone or mail or visit our website We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2020, Transnorm belt curve conveyor left GKF 90°-700-500-IR450 - NEW RA2313 Technical data: Frame width (NB): 700 mm Frame width with Bearing cover and motor: 900 mm belt width (GuB): 500 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 450 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,67m/s Drive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2020 Optionally available: Supports Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. Nedsuuu Rwspfx Akqocr We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1999, curved belt conveyor curved belt 109° right Transnorm TS1500-100 second-hand machine Ncedpfx Aksk Aa E Aeqer Technical details: Manufacturer: Transnorm Type: curved belt 109° right TS 1500-100 belt bend conveyors Year of construction: 1999 Angle: 109° Direction: Right Nominal radius RN: 600 mm BN width: 600 mm Speed: v = 1.0 m/s Strap type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: Lxwxh = 2.4 x 1.10 x 0.40 m Weight: 150 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik