Used Hydraulic Line for sale (22,421)

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Bljdju Tg I Dspfx Akxsg Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. Bedpfx Aoyizxrekxelg All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2008, KALTENBACH KKS 400 E HYDRAULIC METAL CIRCULAR SAW MAKE KALTENBACH, MADE IN GERMANY MODEL KKS 400 E YEAR 2008 SAW BLADE DIAMETER Up to 400.0 mm CUTTING CAPACITY AT 90 DEGREES ROUND: 130.0 mm SQUARE: 120.0 mm FLAT: 305.0 x 40.0 mm or 240.0 x 85.0 mm CUTTING CAPACITY AT 45 DEGREES ROUND: 130.0 mm Bledpfxjy D I Nnj Akxeg FLAT: 245.0 x 30.0 mm or 180.0 x 70.0 mm MILTER ADJUSTABLE LEFT - RIGHT 0 – 90 DEGREES INFINITELY VARIABLE SAW BLADE FEED RATE 0 – 10 m/min SAW BLADE CUTTING SPEED 13 / 26 m/min SAW DRIVE 400 V / 1,7 / 2.6 kW HYDRAULIC DRIVE 400 V / 0.75 kW PLUS 2 SETS OF LOADING RACK

Year of construction: 2023, condition: used, Pressing force 53 t stroke 300 mm control Siemens Pneumatic system pressure 6 bar Maximum supply pressure of the pneumatic system 10 bar Pressure in the hydraulic system 255 bar Dimensions (HxWxD) 3.200 x 2.500 x 2.350 mm weight 8.000 kg In our assessment, the bushing press is in good used condition. Technical features: - Bushing pressing including plastic deformation Bodpfoy H Rahex Akxelg - TOX pneumatic-hydraulic actuator with 53t pressing force at 6 bar - 300mm stroke - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2023, voltage 400V, 50Hz V current intensivity 40 A output 15 kw operating pressure 4,5 bar weight 1.600 kg In our assessment, the assembly system is in good used condition. Blsdey H Rabepfx Akxog Technical features: - Assembly system for pressing individual parts into a battery cooling plate - Pressing process using pneumatic cylinders and servo motors - Pneumatic suction of the cooling plate - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: used, Year of construction: 2018, Used angle head Blodswkbcnepfx Akxjg for Holz Her CNC machining centers Year of manufacture: 2018 HSK 63 F holder with torque support with 2 horizontal tool spindles suitable for holding a CLAMEX grooving cutter and a saw blade Technical data: max. drive speed: 8,000 rpm max. output speed: 12,000 rpm Permissible operating temperature: 85°C Unit swivels 360° around drive axis Sound level: 80 dB(A) Weight: 3.257 kg Availability: short-term Storage location: Hochheim

Condition: good (used), Year of construction: 2021, With patented MULTIFORCE end-lift system! The punching press automatically adjusts the cutting force to the size of the punching tool. It does not matter how resistant or thick the material to be cut is. Cutting table: 1,000 x 500 mm Arm reach: 370 mm Maximum cutting power: 25 t – 245 kN Dimensions: 1,000 x 1,140 x 1,710 mm Net weight (with oil): 1,020 kg Blodsy Inwyepfx Akxeg

Condition: excellent (used), functionality: fully functional, conveyor belt width: 650 mm, input voltage: 400 V, total length: 7,600 mm, working width: 650 mm, total width: 950 mm, total height: 915 mm, TOP fine pastry line Rondo model: PMML 102.B Stainless steel design LED panel Cutting station for 2 rollers Folding shoes and rolling unit Filling unit/dispenser Calibrator/calibration head with Mehler Moistening unit Bedpfxey Ild Rs Akxolg Mobile table Guillotine max. 100/min Working width 650 mm Connection 400V, 16A-CEE plug Dimensions: 7600 x 950 x 915 mm (W x D x H) Used machine We have more bakery machines in stock!

Condition: used, Year of construction: 2006, Petersen machinery group, current Forstner. The machine is in good condition, smoothing function, longitudinal cutting function, sheet cutting. Longitudinal cutting into five parts, (four pairs of longitudinal knives) the ability to accommodate seven pairs. Perfectly working. Simple Siemens controller. The receiving table is included, visible in the last photos. Specification: Model: Petersen machinery group QLA-PROFI Bsdpfx Akswryxdsxjlg Made in: Sweden Year: 2006 Working width: 1250 mm Thickness: 1.75 mm Longitudinal cutting knives: 4 Straightening rollers: 6 Shearing: guillotine Controller: Siemens Simatic panel Other: a sheet metal receiving table 1250 x 5000 mm is included. If you have any more questions, we will be happy to answer.

Year of construction: 2011, condition: used, Profiling line for the production of roof profiles or facade T45. Training and installation are available upon request. Manufacturer: Rollset (Finland) Year: 2011 Profiles produced: T45 as Rukki (there is a profile for the production of roof and facade) Metal thickness: min 0.43 mm; max 0.65 mm Controller: Simens control, motor / reducer Other: Automatic receiving table 8 m. Blsdpjumlkxefx Akxog If you have any more questions, we will be happy to answer.

Condition: excellent (used), Year of construction: 2014, Hydraulic Press Bunorm 4S-500 Manufacturer: Bunorm AG Model: 4S-500 Year of Manufacture: 2014 Pressing Force: 500 kN Maximum Pressure: 225 bar Weight: 3,200 kg Blsdpfx Aoxfl Axskxjg Electrical Connection: 3×400 V + N + PE Frequency: 50 Hz Protection: 20 A Control System: Siemens Simatic HMI Touch Safety System: SICK C4000 Light Curtain SCOPE OF DELIVERY Includes, among others (non-exhaustive list): Hydraulic Press Bunorm 4S-500 Exact scope of delivery as shown in the photo series. The Bunorm 4S-500 hydraulic press impresses with its robust construction and a pressing force of 500 kN at a maximum pressure of 225 bar. With its solid build and a weight of 3,200 kg, the press is suitable for demanding production applications. The integrated Siemens Simatic HMI Touch control system enables precise and user-friendly operation. Thanks to the modern SICK C4000 light curtain safety system, a high level of operator protection is ensured. This machine is the ideal solution for companies that value reliability, precision, and safety. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, LVD Shear Type HST C-10/31 Capacity 3000 x 10 Bedpfx Aex Tqtbekxjlg

Condition: used, functionality: fully functional, Guillotine Shear Brand: SAGITA Capacity: 4000 x 8 mm Backgauge capacity: 1100 mm Blodpfxeynglns Akxsg Dimensions: 4750 x 2250 x 1850 mm Weight: 12 t Blade gap adjustment ELGO backgauge Rear sheet support

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: lighting, The Villex Big Cube Block Line Black 2.0 by Villex Container GmbH is a modern 6.0-meter office container featuring the BLOCK-LINE design, known for its robust construction and versatile applications. With a length of 6.0 m, width of 3.0 m, and height of 2.6 m, it offers generous space for a wide range of uses. The 5 cm thick insulation ensures effective thermal management, keeping the interior comfortably tempered. Anthracite-colored panels (RAL7016) and the base frame give the container a contemporary and stylish appearance. The container is equipped with a double-glazed glass door and two floor-to-ceiling windows (1000 x 2000 mm), which allow for abundant natural light and create a bright working environment. The electrical fit-out includes a 32A CEE plug (red), three double power sockets, two LED lights, and one light switch. Weighing 1,000 kg, the Villex Big Cube Block Line Black 2.0 remains easily transportable while providing a high-quality, functional solution for modern office or workspaces. Item number: BCBLB2.0 Version: 6.0 m container Length: 6.0 m Width: 3.0 m Bljdpfxey Hkvpe Akxeg Height: 2.6 m Insulation thickness: 5.0 cm Panel color: RAL7016 (anthracite) Base frame color: RAL7016 (anthracite) Weight: 1,000 kg Doors: 1 x door (glass) Windows: 1 x floor-to-ceiling window (1000 x 2000 mm) & 2 x glass elements Electrical equipment: 32A CEE plug, red; 3 x double sockets, 2 x LED lights & 1 x light switch Includes air conditioning for heating & cooling We manufacture your container individually to your specifications! Optional features available at extra cost: • Custom dimensions, e.g. 9x3 m, 4x2.4 m, double container, triple unit, and more • Various window sizes • Different colors • Floor colors • Practical forklift pockets • Lamp • Roller shutters • Heating • WC, shower, toilet, washbasin • Kitchen • Plastered interior walls • And much more Delivery is usually made with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance via PayPal or bank transfer. Delivery time for in-stock standard containers nationwide is approx. 1–2 weeks after order receipt, depending on postal code region. We manufacture and deliver custom containers within 1–4 weeks. Collection and inspection at Villex Container GmbH, Dortmunder Str. 90, 59427 Unna can be arranged by appointment during business hours by prior telephone arrangement.

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: lighting, Ready for immediate delivery, turnkey and in stock Dimensions: Length: 6.0 m Width: 3.0 m Height: 2.6 m External area: 18.0 m² Insulation thickness: 5.0 cm Colours: Panel: RAL 7016 (anthracite) Base frame: RAL 7016 (anthracite) Block Line cladding 3.0: RAL 7016 Weight: 1,300 kg Door: 1x PVC glass door, double-glazed Windows: 2x floor-to-ceiling, vertical PVC windows (100 x 200 cm), double-glazed, tilt-and-turn function Electrical installation: According to VDE standard 3-phase, 32A CEE plug (red) 3x double power sockets Lighting: 2x lamps 1x light switch Air conditioning: Split unit for heating and cooling, included in the price ----- Optional additional equipment (at extra charge): Double-leaf doors: For wider access and improved transport options. Additional doors: Flexible access options. Additional windows: Enhanced ventilation and daylight. Additional double windows: Improved thermal and sound insulation. Bedpsy Hkbxjfx Akxelg Additional floor-to-ceiling windows: Modern design and generous lighting. Roller shutters: Privacy and sun protection for light and visibility control. Glass façade: Bright ambience thanks to fully glazed front. Woodstyle façade: Wooden finish for a warm, aesthetic appearance. Separate rooms: Flexible use of space through additional room partitions. WC: Integrated sanitary unit for greater comfort. Shower: Addition to the sanitary unit, ideal for longer stays. Air conditioning: Additional heating and cooling functions. Insulation: Choice of 50 mm, 60 mm, 80 mm, 100 mm, or 120 mm. Forklift pockets: Easier handling with forklifts. ----- Delivery: Nationwide delivery possible with crane vehicles. To calculate the delivery price, please provide your postal code. Delivery time: 1–4 weeks, depending on distance and availability (standard container or custom-built).

Condition: like new (used), Year of construction: 2013, cutting length 1060 mm cutting angle 2 ° no. of strokes 50 Hub/min engine output 4,0 kW weight of the machine ca. 0,67 t Motorised guillotine shears type 165.03 Technical data: Working width (cutting length): 1060 mm Blsdeua Iulopfx Akxog Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Machine stroke rate approx.: 50/min Cutting angle: 2° Opening width hold-down device: 5 mm Factory setting cutting gap 0.1 mm - Digital display for backgauge - Front table support - Operating instructions available

Condition: used, Year of construction: 2011, functionality: fully functional, Specification: Q: 100/30 l/min Bljdpswtgwiefx Akxsg Tank capacity: 630 l Power: 22/1.5 kW Speed: 1450/1500 rpm Max. pressure: 100/3 bar Duty cycle: 100% Voltage: 230/400 V Frequency: 50 Hz The Pregler hydraulic power unit is a reliable and powerful solution for supplying hydraulic systems in a variety of industrial applications. It combines high-quality components in a robust housing to ensure stable pressure supply and efficient operation. The unit is versatile, easy to integrate into existing systems, and its durable construction ensures a long service life.

Condition: good (used), I am selling a HILMA-ROEMHELD machine vice, good condition. Bljdpfx Akev Upvrexog

Condition: excellent (used), Key Information: Type: Scissor lift / lifting table Load capacity: 500 kg Condition: used – fully operational Controls: remote up/down + emergency STOP Power supply: 230/400V Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: We offer a professional hydraulic scissor lift – ideal for use in workshops, manufacturing, and warehousing. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Features include: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Perfect for: - Assembly work - Packing - Service and production - Loading and unloading 📦 Set includes: Bsdpfx Asyw Ua Tjkxjlg - Scissor lift - Hydraulic power unit - Controls (remote) 🚚 Shipping: - Pallet shipping - Local pick-up possible

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Bledpfxjudph Ie Akxjg

Condition: excellent (used), Sell Hurst hydraulic rescue tool kit - Hydraulic shears. Bsdpfx Akevgnudjxslg - Arm spreader. - Hydraulic pump.

Condition: excellent (used), I sell a Lukas baler in very good condition. Blodpfx Akoum Htzjxog

Condition: used, Year of construction: 1980, pressure 6,3 t stroke 250 mm throat 150 mm dayligth 450 mm table surface area 330 x 270 mm Bodpfx Aey Ig Nbskxolg table height over floor 970 mm ram surface 240 x 100 mm oil volume 30 l power requirement 1,5 kW dimensions (WxDxH) 0,9 x 1,3 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (make Pilz), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 2015, Specification: Model: Forstner Compact Access Pro Made in: Austria Year: 2015 Working width: 1250 mm Thickness: 1 mm Ribbed knives: 5 Straightening rollers: 6 Shearing: guillotine Controller: Siemens SPS S1 Pickup: April Bjdpfev Ac Anjx Akxslg If you have any more questions, we will be happy to answer them.

Condition: used, Year of construction: 2010, Good condition, Finnish, UK KONE 9010 PS with automatic recoiler. Specification: Model: JK KONE 9010 PS Manufactured in Finland. Year: Working width: 1250 mm Thickness: 0,5 - 1,25 mm Longitudinal cutting blades: 6 pcs Control: cnc Bedpfx Aet Nghwjkxslg Speed: adjustable 30 m/min Smoothing: 3 rollers Power: 5kw / 16A Other: guillotine shearing Dimensions: 1900 x 1800 x 1250 mm Recoiler: 3 T If you have any further questions, we will be happy to answer them.